T800/924C 탄소-에폭시 복합재판의 압축강도에 대한 두께 효과
Thickness Effect on the Compressive Strength of T800/924C Carbon Fibre-Epoxy Laminates
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구에서 복합재의 압축 강도에 대한 두께 효과가 [04]ns, [45/0/-45/90]ns, [45n/0n/-45n/90n]s (n=2 to 8) 등의 적층 방법을 이용하여 체계적인 실험을 통해 조사되었다. 여기서 섬유 체적비, 기공률, 섬유 굴곡도, 층간 응력 등, 적층 두께 증가에 따른 압축 강도에 영향을 주는 파라미터 들이 실험과 이론적으로 연구되었다. 또한 엇교차 대칭 복합재판의 파괴강도에 대한 적층 순서 효과도 조사되었다. 이를 위해 2종류의 다른 스케일링 효과를 갖는 (1) 플라이-레벨 기법인 [45n/0n/-45n/90n]s과 (2) 서브라미네이트-레벨 기법인 [45n/0n/-45n/90n]s가 적용되었다. 일 방향 적층 시편 [04]ns과 플라이-레벨인 [45n/0n/-45n/90n]s에는 분명한 두께효과를 나타내었다. 그리고 섬유 굴곡도 와 기공률의 두께효과에 기여하는 주요 파라미터 들임이 확인 되었다. 그러나 서브라미네이트-레벨인, [45/0/-45/90]ns의 압축강도는 시편 두께의 변화에도 불구하고 별 영향을 나타내지 않았으며, 서브라미네이트- 레벨 시편에서 구한 강도가 플라이-레벨 시편에서 구한 강도보다 약간 높았다. 이 같은 효과에 대한 이유는 섬유 굴곡도, 기공률, 자유단 효과 및 0°층과 비 0°층 사이의 응력 재 분포에 의한 영향인 것으로 보인다. 측정된 파괴강도는 예측 값과 비교되었다.
Abstract
In this study, the effect of laminate thickness on the compressive behaviour of composite materials is investigated through systematic experimental work using the stacking sequences, [04]ns, [45/0/-45/90]ns and [45n/0n/-45n/90n]s (n=2 to 8). Parameters such as fibre volume fraction, void content, fibre waviness and interlaminar stresses, influencing compressive strength with increasing laminate thickness are also studied experimentally and theoretically. Furthermore the stacking sequence effects on failure strength of multidirectional laminates are examined. For this purpose, two different scaling techniques are used; (1) ply-level technique [45n/0n/-45n/90n]s and (2) sublaminate level technique [45/0/-45/90]ns. An apparent thickness effect existes in the lay-up with blocked plies, i.e. unidirectional specimens ([04]ns) and ply-level scaled multidirectional specimens ([45n/0n/-45n/90n]s). Fibre waviness and void content are found to be main parameters contributing to the thickness effect on the compressive failure strength. However, the compressive strength of the sublaminate level scaled specimens ([45/0/-45/90]ns) is almost unaffected regardless of the specimen thickness (since ply thickness remains constant). From the investigation of the stacking sequence effect, the strength values obtained from the sublaminate level scaled specimens are slightly higher than those obtained from the ply level scaled specimens. The reason for this effect is explained by the fibre waviness, void content, free edge effect and stress redistribution in blocked 0° plies and unblocked 0° plies. The measured failure strengths are compared with the predicted values.
참고문헌 (25)
- "Compression Testing of Thick-Section Composite Materials American Society for Testing and Materials", me, pp.439~456 (1991)
- "Is There a Thickness Effect on Compressive Strength of Unnotched Composite Laminates?", 95, pp.143~158 (1999)
- "A New Compression Test Methods for Thick Composites", 29(13), pp.1789~1806 (1995)
- "Experimental Evaluation of Graphite", Epoxy Composite Cylinders Subjected to External Hydrostatic Compressive Loading 1987 Spring Conference on Experimental Mechanics Society for Experimental Mechanics, 1987, 948~951
- "Size Effect on Compression Strength of Fibre Composites Failing By Kink Band Propagation", 95, pp.103~141 (1999)
- "Compressive Failure of Notched Carbon Fibre-Epoxy Panels", university of cambridge (1989)
- "Strength and Failure Mechanics of Unidirectional Carbon fibre-Reinforced Plastics under Axial Compression"
- "Size Effect on Compressive Strength of T300", 924C Carbon Fibre-Epoxy Laminates, 2002, pp.3(8), 364~370
- "Experimental Determination of the In Situ Transverse Lamina Strength in Graphite", Epoxy Laminates Journal of Composite Materials, 1982, pp.16, 103~116
- "Measurement of Small Angle Fibre Misalignments in Continuous Fibre Composites", 30 no. 4, pp.1987~
- "FE77 Users’ Manual" (1995)
- "The Continuous Curing Process for Thermoset Polymer Composites. Part 2: Experimental Results for a Graphite", Epoxy Laminate, 1996, pp.30(5), 627~647
- "Compressive Strength of Unidirectional Composites", 11, pp.1992~
- "Test Methods for the Fibre And void Content of Cured Carbon And Glass Fibre Composites", pp.~3 (1990)
- "Interlaminar Effects in Fibre-Reinforced Plastics ? A Review", 5 no. 1, pp.1975~
- "Compression Failure of Unidirectional Glass-Fibre-Reinforced Plastics", bazhe 45(v), pp.201~208 (1992)
- "Micromechanics", 16 no. 1-4, pp.1983~
- "Compressive Behaviour of Composites", 8(10) (1997)
- "Size Effects in The Testing of Fibre-Composite Materials", 59(13), pp.1937~1957 (1999)
- "The Effect of Thickness of Interlaminar Stresses and Delamination in Straight-Edged Laminates Journal of Composites Technology & Research", 9, pp.81~87 (1987)
- "Strength Scaling in Fibre Composites", 30(4), pp.1992~
- "Three-Dimensional Finite Element Analysis of Interlaminar Stresses in Thick Composite Laminates", 40(6), pp.1991~
- "Fracture Mechanics Using a 3D Composite Element", 45(1), pp.29~39 (1999)
- "Mechanics of composite Materials", pp.227~330 (1996)
- "Compressive Behaviour of Composite Laminates Before and After Low Velocity Impact" (2003)