열간가압성형기술을 이용한 Al-SiC 금속기 복합재료 개발
Development of Al-SiC Metal Matrix Composites by using Hot Press Forming Technologies
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
분말야금법 및 고온진공가압기술, 열간등가압성형기술을 이용하여 알루미늄 금속기 복합재료를 제작하였으며 이들과 관련한 미시역학 기반 강화공정 모델을 개발하였다. 고온, 가압 성형공정은 기지재료의 비탄성거동과 성형체 내부의 기공 제거를 통한 충진을 수반하게 되며 이러한 공정은 압력, 온도 및 강화재의 체적분률 등과 같은 공정변수의 영향을 받게 된다. 따라서 개발 된 강화공정 모델을 유한요소해석 프로그램에 적용함으로써 고온진공가압과 열간등가압 동안 기공의 상대밀도 변화에 따른 충 진거동을 예측하였고 다양한 공정조건 하에서 실험결과와 잘 일치함을 확인하였다. 완성된 알루미늄 금속기 복합재료의 건전 성 평가와 관련하여 인장시험을 수행하였으며 초기 잔존하는 기공의 영향에 따른 제반 기계적 특성을 고찰할 수 있었다.
Abstract
Powder metallurgy has been employed for the development of SiC particle reinforced aluminum metal matrix composites by means of hot isotropic pressing and vacuum hot pressing. A material model based on micro-mechanical approach then has been presented for the processes. Densification occurs by the inelastic flow of matrix materials during the consolidation, and consequently it depends on many process conditions such as applied pressure, temperature and volume fraction of reinforcement. The model is implemented into finite element software so that the process simulation can be performed enabling the predicted relative density to be compared with experimental data. In order to determine the performance of finished products, further tensile test has been conducted using the developed specimens. The effect of internal void of the materials on mechanical properties therefore can be investigated.
참고문헌 (22)
- "ASM Handbook volume 21 Composites", pp.1~22 (2001), ASM International
- "Low cost Aluminum Metal Matrix Composites", 159(7), pp.37~40 (2001)
- "“An Overview of HotIsostatic Pressing ” Journal of Materials Processing Technology", pp.45~65 (1992)
- "“Measurement & Analysis of Metal Powder Densificationduring HIP", pp.34~35 (1990)
- "Effect of Liquid Phase on SuperplasticBehavior of a Modified 6061 Aluminum Alloy", 47, pp.569~575 (2002)
- "“Comparative Evaluation of Extrusion and Hot IsostaticPressing as Fabrication Techniques for Al-SiC Composites", pp.225~229 (1991)
- "Proceedings of the 2ndPacific Rim International Conference on AdvancedMaterials and Processing", pp.155~460 (1995)
- "“Mechanisms of Hot Isostatic Pressing"
- "“A Plasticity Theory for Porous Solids ”International Journal of Mechanical Sciences", pp.215~224
- "“Plasticity Theory for porousMetals ” International Journal of Mechanical Sciences", pp.285~291
- "“Continuum Theory of Ductile Rupture byVoid Nucleation and Growth Part I-Yield Criteria andFlow Rules for Porous Ductile Media ” Journal of EngineeringMaterials and Technology", pp.2~15 (1977)
- "“Influence of Voids on Shear Band Instabilitiesunder Plane Strain Conditions", pp.389~407 (1981), Tvergaard
- "“Thermomechanical Deformation of PowderbasedPorous Aluminium Part II", pp.21~32 (1991), Constitutive ModelIncluding Densification Hardening
- "“The Densification ofPowders by Power-law Creep during Hot Isostatic Pressing", pp.31~35 (1992)
- "SuperplasticBehavior of PM SiCp", 6061 Aluminum Alloy Compositesat High Strain Rates, 2002, pp.8, 37~44
- "Superplasticity in Metals and Ceramics" (1997), Cambridge University Press
- "Determination ofSuperplastic Constitutive Equations and Strain RateSensitivities for Aerospace Alloys", 211, pp.367~380 (1997)
- "Superplasticityin PM 6061 Al Alloy and Elimination of StrengtheningEffect by Reinforcement in Superplastic PM AluminumComposites", 298, pp.166~173 (2001)
- "Densification Behavior of Mixtures of Hardand Soft Powders under Pressure", 111, pp.231~239 (2000)
- "“The Effect of Reinforcementson The Densification of a Metal Powder", pp.2247~2255 (1992)
- "Comprehensive Composite Materials Vol 3 Metal Matrix Composites", pp.91~115 (2000), ElsevierSciecne Ltd
- "“Cavity FormationDuring Tensile Straining of Particulate and Short FibreMetal Matrix Composites", pp.1701~1711 (1993)