탄소 섬유 / 에폭시의 반구형 미소접합 시험편에 대한 계면강도 평가
Interfacial shear strength test by a hemi-spherical microbond specimen of carbon fiber and epoxy resin
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Interfacial shear strength between epoxy and carbon fiber was analyzed utilizing a hemi-spherical microbond specimens adhered onto single carbon fiber. The hemi-spherical microbond specimen showed high regression coefficient and small standard deviation in the measurement of interfacial strength as compared with a droplet and an inverse hemi-spherical one. This seemed to be caused by the reduced meniscus effects and the reduced stress concentration in the region contacting with a pin-hole loading device. Finite element analysis showed that the stress distributions along the fiber/matrix interface in the hemi-spherical specimen had a stable shear stress distribution along the interface without any stress mode change. The experimental data was also different according to the kinds of loading device such as the microvise-tip and the pin-holed plate.
Abstract
Interfacial shear strength between epoxy and carbon fiber was analyzed utilizing a hemi-spherical microbond specimens adhered onto single carbon fiber. The hemi-spherical microbond specimen showed high regression coefficient and small standard deviation in the measurement of interfacial strength as compared with a droplet and an inverse hemi-spherical one. This seemed to be caused by the reduced meniscus effects and the reduced stress concentration in the region contacting with a pin-hole loading device. Finite element analysis showed that the stress distributions along the fiber/matrix interface in the hemi-spherical specimen had a stable shear stress distribution along the interface without any stress mode change. The experimental data was also different according to the kinds of loading device such as the microvise-tip and the pin-holed plate.
참고문헌 (11)
- 문창권, "섬유의 표면처 리가 탄소섬유강화 복합재료의 기계적 특성에 미치는 영 향", Polymer (Korea), 14(6), pp.630~637 (1990)
- 문창권, "섬유직경과 섬유표면처리가 계면전단강 도에 미치는 영향", Polymer(Korea), 15(3), pp.289~296 (1991)
- Lynn S. Penn, "Interpretation of the force trace for Kevlar", epoxy single filament pull-out tests, 1982, pp.17(2), 91~97
- 강수근, "미소접합시험과 유한요소법을 통한 섬유", 에폭시 복합재의 계면 전단강도 해석, 2006, pp.19(4), 7~14[DOI]
- R. J. Day, "Investigation of the Micromechanics of the Microbond test", Composites Science and Technology, 58, pp.907~914 (1998)
- H. D. Wagner, "Study of the interface in Kevlar 49-epoxy composites by means of microbond and fragmentation tests: effects of materials and testing variables", Journal of Materials Science, 28, pp.2238~2244 (1993)
- J. F. Mandell, "A microdebonding test for in situassessment of fibre", matrix bond strength in composite materials, 1980, pp.1(1), 40~44
- M. R. Piggott, "Fiber Pull Out Experiments With Thermoplastics", Polymer Engineering and Science, 31(17), pp.1246~1249 (1991)
- 박주언, "복합재료의 계면 전단강도를 평가하기 위한 새로운 반구형 미소접합 시험편", 한국복합재료학회지, 21(2), pp.25~30 (2008), 한국복합재료학회
- John A. Nairn, "Analytical Fracture Mechanics Analysis Of The Pull-Out Test Including The Effects Of Friction And Thermal Stresses", Advanced Composite Letters, 9(6), pp.373~383 (2000)
- Umesh Gaur, "Microbond Method for Determination of the Shear Strength of a Fiber", Resin Interface: Evaluation of Experimental Parameters, 1989, pp.34, 35~51