본문 바로가기
KERD
논문KCI 등재

복합재료/금속 접착 계면의 혼합모드 파괴인성 측정

Mixed-mode fracture toughness measurement of a composite/metal interface

이정주|김원석|장창재
한국복합재료학회 (The Korean Society For Composite Materials)|2011.04|Composites Research|제24권 제2호|pp. 1-8

1

조회

0

다운로드

2

인용

0

참고문헌

키워드

interface계면파괴인성fracture toughness접착 결합혼합모드adhesive bondingmixed-mode
주제분류재료공학

초록

복합재료/금속 접착 조인트의 파손기준을 제시하기 위하여 다양한 혼합모드 하중상태에서 계면파괴인성을 측정하였다. 계면파괴인성은 SLB 시편을 이용하여 측정하였으며 시편의 두께를 변화시킴으로 모드 혼합비율을 다양하게 설정하였다. 실험 결과 계면의 파괴인성은 균열 열림에 비해 균열 미끄러짐 모드의 비율이 높은 하중상태에서 더 큰 값을 나타내었다. 균열 열림 및 미끄러짐 하중모드에 따른 계면파괴 거동의 차이를 균열진전 과정을 관찰한 현미경 영상을 기초로 고찰하였다. 표면 거칠기가 접착 강도에 미치는 영향 또한 고찰되었다.

Abstract

Interfacial fracture toughness under various mixed-mode loading is measured to provide a mixed-mode fracture criterion of a composite/metal bonded joint. Experimental fracture characterization tests were carried out using a SLB (single leg bending) specimen, which controls mode ratio with the specimen thickness. The experimental result of the SLB test conforms that interfacial fracture toughness increases as the mode II component increases. The effect of loading mode on interfacial crack growth is investigated on the basis of crack path observation using microscopic image acquisition technique. The influence of interfacial roughness on adhesion strength is also discussed.

참고문헌 (27)

  1. Higgins, A., "Adhesive bonding of aircraft structures", Int. J. Adhes. Adhes, 20(5), pp.367~376 (2000)
  2. Davis, J.R., "Aluminum and Aluminum Alloys (ASM Specialty Handbook)", pp.438~450 (1993), ASM International
  3. Brockmann, W., "Adhesive bonding: Materials, Applications and Technology", pp.205~236 (2009), WILEY-VCH
  4. Static strength of bolted and adhesively bonded joints for steel structures, In Adhesively bonded joints: testing, analysis and design, "Albrecht, P.", 229~251, pp.ASTM STP 981 (1988)
  5. Noor, A.K., "Structures technology for future aerospace systems", pp.58~65 (2000), AIAA
  6. "ASTM D 3433 - 1999, Standard test method for fracture strength in cleavage of adhesives in bonded metal joints", ~
  7. "ASTM D 5528 - 2001, Standard test method for mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites", ~
  8. "ISO 15024 - 2001, Fibre-reinforced plastic composites - determination of mode I interlaminar fracture toughness, GIc, for unidirectionally reinforced materials", ~
  9. "JIS K 7086 - 1993, Testing methods for interlaminar fracture toughness of carbon fiber reinforced plastics", ~
  10. Arcan, M., "A methods to produce uniform plane stress state with applications to fiber-reinforced materials", Exp. Mech, 18, pp.141~146 (1978)
  11. Richard, H.A., "A new compact shear specimen", Int. J. Fract, 17, pp.R105~R107 (1981)
  12. Richard, H.A., "A loading device for the creation of mixed mode in fracture mechanics", Int. J. Fract, 22, pp.R55~R58 (1983)
  13. Wang, J.S., "Experimental determination of interfacial toughness curves using Brazil Nut sandwiches", Acta metal. Mater, 38, pp.1279~1290 (1990)
  14. Davidson, B.D., "A single leg bending test for interfacial fracture toughness determination", Int. J. Fract, 78, pp.193~210 (1996)
  15. 김원석, "복합재료", 금속 접착 계면의 파괴인성치 측정, 2008, pp.21(4), 7~14[DOI]
  16. 정성균, "무게가 상이한 탄소부직포가 삽입된 CFRP적층판의 층간파괴인성", 한국복합재료학회지, 22(2), pp.43~48 (2009), 한국복합재료학회
  17. "DIN EN 6034 - 1995, Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy Mode II - GIIC", ~
  18. "ASTM D 6671 - 2004, Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites", ~
  19. Davidson, B.D., "Evaluation of energy release rate-based approaches for predicting delamination growth in laminated composites", Int. J. Fract, 105, pp.343~365 (2000)
  20. Irwin, G.R., "Critical energy release rate analysis of fracture strength", Research Supplement, 33, pp.193~198 (1954)
  21. Jiao, J, "Measurement of interfacial fracture toughness under combined mechanical and thermal stresses", J. Electron. Pack, 120, pp.349~353 (1998)
  22. Nairn, J.A., "On the calculation of energy release rate for cracked laminates with residual stresses", Int. J. Fract, 139, pp.267~293 (2006)
  23. Yokozeki, T., "Correction method for evaluation of interfacial fracture toughness of DCB, ENF and MMB specimens with residual thermal stresses", Compos. Sci. Tech, 68, pp.760~767 (2008)
  24. "ASTM E 1820-05., Standard test method for measurement of fracture toughness", ~
  25. "ASTM D 5045-99., Standard test methods for plane-strain fracture toughness and strain energy release rate of plastic materials", ~
  26. Kinloch, A.J., "Adhesion and Adhesives: science and technology" (1987), Chapman and Hall
  27. Kim, W.S., "Evaluation of mechanical interlock effect on adhesion strength of polymer-metal interfaces using micro-patterned surface topography", Int. J. Adhes. Adhes, 30, pp.408~417 (2010)

이 간행물의 다른 논문 (5건)

A molecular dynamics simulation on the defect structure in silicon under indentation전성식, 강우종, 유용문, 트란 딘 롱pp. 9-13항공기용 복합재료 다축 광학 구조의 진동해석에 관한 연구정광영, 이준호, 박광우, 곽재혁, 전성식, 김대영pp. 14-21복합재/AISI4340 이중구조 후육실린더의 구조적 거동 및 최적화김위대, 이경규pp. 22-29유리섬유직물에 대한 수지의 젖음성 평가안흥근, 최낙삼, 한승욱, 이민수pp. 30-37탄소나노튜브 복합재 적층판을 활용한 전파흡수체의 설계 및 성능에 대한 연구김진봉, 김천곤pp. 38-45
원문 보기