수중운동체 적용을 위한 샌드위치 복합재 원통의 좌굴 해석 및 시험
Buckling Analysis and Test of Composite Sandwich Cylinder for Underwater Application
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구에서는, 복합재 샌드위치를 수중운동체용 구조물에 적용하기 위한 기초연구로서, 샌드위치 복합재 원통의 제작, 좌굴 해석 및 시험 방법, 중량저감 효과를 분석하였다. 우선 면재에 주름이 생기지 않도록 하는 2단계 샌드위치 제작 방법을 소개하고, 이를 사용하여 원통을 제작하여 수압시험을 수행하였다. 동시에 MSC Nastran의 쉘요소와 고체요소를 사용한 유한요소해석을 수행하여 시험결과와 비교하였다. 시험과 해석의 결과 비교로부터 선형 유한요소해석으로도 샌드위치 원통의 좌굴압력을 3% 내외의 오차로 정확히 예측할 수 있음을 확인하였다. 또한 필라멘트 와인딩 원통에 대한 인자연구를 통해 샌드위치를 사용할 경우 동일한 지지압력에서 필라멘트 와인딩 원통보다 최소 30% 이상 무게가 줄어드는 것을 확인하였다.
Abstract
In this paper, as a basic research to apply the composite sandwich to underwater vehicle, the manufacturing, analysis and test methods, and weight saving effect of a composite sandwich cylinder under external pressure were studied. A two-step manufacturing method to prevent the wrinkling of the sandwich cylinder face was proposed and the three cylinders were made and tested. Finite element results based on the shell and solid model using MSC.Nastran were compared with test results. The comparison showed that the linear finite element analysis using the shell and solid elements can predict the buckling pressure of the sandwich cylinder with approximately 3% difference. The parametric study of the filament wound cylinders revealed that the composite sandwich can reduce the weight of the cylinder more than 30% compared with the filament wound cylinder supporting the same pressure.
참고문헌 (19)
- C. T. F. Ross, "A Conceptual Design of an Underwater Vehicle", Ocean Engineering, 33, pp.2087~2104 (2006)
- H. L. T. Nguyen, "Buckling under the External Pressure of Cylindrical Shells with Variable Thickness", International Journal of Solids and Structures, 46(24), pp.4163~4168 (2009)
- G. Gusic, "The Influence of Circumferential Thickness Variations on the Buckling of Cylindrical Shells under External Pressure", Computers & Structures, 74(4), pp.461~477 (2000)
- S. H. Hur, "Postbuckling of composite cylinders under external hydrostatic pressure", Composite Structures, 86(13), pp.114~124, Elsevier BV
- C. J. Moon, "Buckling of Filament Wound Composite Cylinders Subjected to Hydrostatic Pressure for Underwater Vehicle Applications", Composite Structures, 92(9), pp.2241~2251 (2010)
- M. Yazdani1, "An Experimental Investigation into the Buckling of GFRP Stiffened Shells under Axial Loading", Scientific Research and Essay, 4(9), pp.914~920 (2009)
- M. Buragohain, "Study of Filament Wound Grid-stiffened Composite Cylindrical Structures", Composite Structures, 93(2), pp.1031~1038 (2011)
- J. R. Vinson, "The Behavior of Sandwich Structures of Isotropic and Composite Materials" (1999), Technomic Pub. Co
- W. C. Huang, "Sound Insulation Improvement using Honeycomb Sandwich Panels", Applied Acoustics, 53(1), pp.163~177 (1998)
- J. J. Sargianis, "Noise Mitigation and Wave Number Characterization in Sandwich Structures", Journal of the Acoustical Society of America, 129(4), pp.2416~ (2011)
- R. Zhou, "Sound Transmission Loss of Foam-Filled Honeycomb Sandwich Panels using Statistical Energy Analysis and Theoretical and Measured Dynamic Properties", Journal of Sound and Vibration, 329(6), pp.673~686 (2010)
- [URL]
- 이헌곤, "잠수함 국외 기술 동향", 대한조선학회지, 44(3), pp.3~6 (2007)
- G. A. Kardomateas, "Buckling of Sandwich Wide Columns", International Journal of Non-Linear Mechanics, 37(7), pp.1239~1247 (2002)
- W. Szyc, "Elastic Buckling of an Axially Compressed Sandwich Cylindrical Panel with Three Edges Simply Supported and One Edge Free", Thin-Walled Structures, 44(8), pp.910~918 (2006)
- G. A. Kardomateas, "An Elasticity Solution for the Global Buckling of Sandwich Beams", Wide Panels With Orthotropic Phases, 2010, pp.77(2), 15~21
- V. P. Veedu, "Finite-Element Buckling Analysis of Sandwich Columns Containing a Face", core Debond, 2005, pp.69(2), 143~148
- A. Muc, "Buckling and Failure Analysis of FRP Faced Sandwich Plates", Composite Structures, 48(1), pp.145~150 (2000)
- "MSC NASTRAN User’s Guide", ~