동일 에너지 조건하에 충격체 질량과 속도변화에 따른 발포 고분자의 흡수 에너지에 관한 실험적 연구
An Experimental Study on the Absorbed Energy of Polymeric Foam According to Different Mass and Impact Velocity Based on the Constant Impact Energy
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는, 발포 폴리프로필렌의 충격에너지 흡수특성이 충격체 질량과 속도중 어느 변수에 더 많은 영향을 받는 지 고찰해 보기 위하여, 충격체 질량과 속도에 변화를 주어 5개의 조합을 만들고, 이 조합들이 동일 한 초기 충격에너지 조건(100 J 및 200 J)이 될 수 있도록, 값을 선정한 뒤, 충격시험을 수행하여, 충격에너지 흡수 특성을 실험적으로 규명하였다. 또한 발포 폴리프로필렌의 기본적인 특성을 파악하기 위하여, 준정적 시험(Quasistatic test)도 수행되었다. 준정적 시험은 MTS 858을 이용하였고, 충격시험을 위해, Instron dynatup 9250 HV가 사용되었다. 충격시험결과, 발포 폴리프로필렌은 충격체 속도에 비해 질량에 더 많은 영향을 받는 것으로 나타났다.
Abstract
In the present study, impact tests were carried out to investigate the crashworthy behaviour of the expanded polypropylene under the constant incident energy (100 J and 200 J) with five different combinations of striker mass and velocity. Also, preliminary quasi-static test was performed to obtain basic characteristics of the expanded polypropylene. MTS 858 and Instron dynatup 9250 HV were used for the quasi-static test and impact tests, respectively. In consequence, it was found that the impact energy absorption characteristics of the expanded polypropylene was more influenced by the striker mass instead of the velocity of the striker.
참고문헌 (20)
- Silva, A. L. N. D, "Evaluation of Rheological and MechanicalBehavior of Blends Based on Polypropylene and MetalloceneElastomers", Journal of Polymer Testing, 21, pp.647~652 (2002)
- 정광영, "A constitutive model for polyurethane foam with strain rate sensitivity", Journal of Mechanical Science and Technology, 26(7), pp.2033~2038 (2012), 대한기계학회
- Avalle, M, "Characterizationof Polymeric Structural Foams under Compressive ImpactLoading by Meas of Energy-absorption Diagram", Journal ofImpact Engineering, 25, pp.455~472 (2001)
- Zhang, J, "ConstitutiveModeling of Polymeric Foam Material Subjected toDynamic Crash Loading", International Journal of Impact Engineering, 21, pp.369~386 (1998)
- Gilchrist, A, "Impact Deformation of rigidpolymeric foams: Experiments and FEA Modelling", InternationalJournal of Impact Engineering, 25, pp.767~786 (2001)
- Landro, L. D, "Deformation Mechanismsand Energy Absorption of Polystyrene Foams for ProtectiveHelmets", Journal of Polymer Testing, 21, pp.217~228 (2002)
- Ouellet, S, "Compressive Responseof Polymeric Foams under Quasi-static, Medium and HighStrain Rate Conditions", Polymer Testing, 25, pp.731~743 (2006)
- Subhash, G, "Quasistatic and HighStrain Rate Uniaxial Compressive Response of PolymericStructural Foams", International Journal of Impact Engineering, 32, pp.1113~1126 (2006)
- 최기상, "변형률 속도에 따른 EPP Foam의 대변형 동적 압축 특성에 관한 연구", 한국자동차공학회 논문집, 17(4), pp.118~125 (2009), 한국자동차공학회
- Viot, P, "Hydrostatic Compression on Polypropylene Foam", International Journal of Impact Engineering, 36, pp.975~989 (2009)
- Ozturk, U. E, "Energy Absorption Calculationsin Multiple Compressive Loading of Polymeric Foams", Materials& Design, 30, pp.15~22 (2009)
- Ozturk, U.E, "Finite Element Analysis of ExpandedPolystyrene Foam under Multiple Compressive Loading andUnloading", Materials & Design, 32, pp.773~780 (2011)
- Yang, X, "Influence of Stress Softeningon Energy-absorption Capability of Polymeric Foams", Materials& Design, 32, pp.1167~1176 (2011)
- Machado, G. C, "Numerical Modeling of Large Strain Behavior of PolymericCrushable Foams", Applied Mathematical Modelling, 35, pp.1271~1281 (2011)
- Zhou, J, "The LowVelocity Impact Response of Foam-based Sandwich Panels", Composites Science and Technology, 72, pp.1781~1790 (2012)
- Daniel, I. M, "Characterizationand Modeling of Stain-rate-dependent Behavior of PolymericFoams", Composites Part A: Applied Science and Manufacturing, 45, pp.70~78 (2013)
- Maheo, L, "Impact on Multi-layered PolypropyleneFoams", International Journal of Impact Engineering, 53, pp.84~93 (2013)
- Rajaneesh, A, "Relative Performanceof Metal and Polymeric Foam Sandwich Plates underLow Velocity Impact", International Journal of Impact Engineering, 65, pp.126~136 (2014)
- 정광영, "동일 충격 에너지 조건하에서 다공질 고분자의 충격거동에 관한 연구", Composites Research, 22(4), pp.27~32 (2009), 한국복합재료학회
- Lee, D.G, "Machine Toolsand Automobiles" (2005), Oxford University Press