저전력 및 고효율 면상발열체를 위한 피치기반 탄소종이 제조 및 특성
Preparation and Characterization of Pitch-based Carbon Paper for Low Energy and High Efficiency Surface Heating Elements
2
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
본 연구에서는 면상발열체 특성을 향상시키기 위해 피치계 탄소종이에 전도성 탄소필러로 석유계 코크스, 카본블랙, 흑연을 페놀수지와 함께 함침시켰으며, 탄소종이에 함침된 탄소필러가 물리화학적 성질에 미치는영향을 전기적, 열적 특성 분석을 통해 고찰하였다. 그 결과, 면저항과 계면접촉저항이 선형적으로 감소하였으며, 탄소필러의 함량이 증가함으로써 전기전도도와 열전도도가 향상하였다. 또한, 탄소종이에 1~5 V 전압을 인가하였을 경우 탄소종이의 면상발열 특성을 관찰하였을 때 5 V 전압에서 최대 125.01oC로 발열 특성을 나타내었다. 이러한 결과는 탄소섬유 사이에 존재하는 미세공극이 채워짐으로써, 전기적 네트워크가 형성되어 전기적 및 열적특성이 향상되었기 때문이다.
Abstract
In this work, phenolic resins containing conductive carbon fillers, such as, petroleum coke, carbon black, and graphite, were used to improve the surface heating elements by impregnating a pitch-based carbon paper. The influence of conductive carbon fillers on physicochemical properties of the carbon paper was investigated through electrical resistance measurement and thermal analysis. As a result, the surface resistance and interfacial contact resistivity of the carbon paper were decreased linearly by impregnating the carbon fillers with phenol resins. The increase of carbon filler contents led to the improvement of electrical and thermal conductivity of the carbon paper. Also, the heating characteristics of the surface heating element were examined through the applied voltage of 1~5 V. With the applied voltage, it was confirmed that the surface heating element exhibited a maximum heating characteristic of about 125.01oC(5 V). These results were attributed to the formation of electrical networks by filled micropore between the carbon fibers, which led to the improvement of electrical and thermal properties of the carbon paper.
참고문헌 (25)
- Kongahge, D, "Fabrication of a Graphene Coated Nonwoven Textile for Industrial Applications", RSC Advances, 6, pp.73203~73209 (2016)
- You, Y.J, "Thermally Conductive Polymer", News and Information for Chemical Engineers, 30(1), pp.66~73 (2012)
- Yang, J.Y, "Application and Standardization Trend of Carbon Fiber during the Fourth Industrial Revolution", Fiber Technology and Industry, 21(4), pp.263~272 (2017)
- Bae, K.Y, "A Study on Application of Warm Air Circulator by Using the Carbon Heating Element with Particle Type", Journal of the Korean Society for Power System Engineering, 7(4), pp.31~37 (2003)
- Zhao, J, "The Improvement on Drying Performance and Energy Efficiency of a Tumbler Clothes Dryer with a Novel Electric Heating Element", Applied Thermal Engineering, 128, pp.531~538 (2018)
- Lee, K.S, "Heat and Electrical Characteristics of Carbon Heating Rod", Korean Society of Mechanical Engineers, 5, pp.1412~1417 (2002)
- 박지용, "유연한 섬유상 발열체용 카본블랙 복합소재의 전기적 특성", 한국응용과학기술학회지, 32(3), pp.405~411 (2015), 한국응용과학기술학회
- Park, S.J, "Carbon Materials" (2015), Myoungmoon Pub. Co
- 이지한, "탄소 단섬유를 이용한 탄소종이 제조 및 전기전도도 특성", 공업화학, 24(2), pp.121~125 (2013), 한국공업화학회
- 홍진호, "A Review on Thermal Conductivity of Polymer Composites Using Carbon-Based Fillers : Carbon Nanotubes and Carbon Fibers", Carbon Letters, 11(4), pp.347~356 (2010), 한국탄소학회
- Sanada, K, "Thermal Conductivity of Polymer Composites with Close-Packed Structure of Nano and Micro Fillers", Composites: Part A, 40, pp.724~730 (2009)
- 함은광, "미분쇄 탄소섬유가 첨가된 피치계 탄소섬유기반 기체확산층용탄소종이 특성", Composites Research, 29(5), pp.262~268 (2016), 한국복합재료학회
- 최경은, "자동차 시트용 탄소섬유 발열체의 전기적 및 저항 발열 특성", 공업화학, 27(2), pp.210~216 (2016), 한국공업화학회
- 표대웅, "고온 열처리에 따른 PAN계 탄소섬유의 발열특성", Korean Chemical Engineering Research(HWAHAK KONGHAK), 49(2), pp.218~223 (2011), 한국화학공학회
- Heo, Y.J, "Preparation and Characterization of Carbon Black", pitchbased Carbon Fiber Paper Composites for Gas Diffusion Layers, 2019, pp.159, 362~368
- 박수진, "팽창흑연", 에폭시 복합재료의 열적 및 기계적 계면 특성, 2004, pp.15(5), 493~498[DOI]
- 양재연, "석탄계 및 석유계 피치가 함침된 탄소", 탄소 복합재료 제조 및 특성, 2015, pp.26(4), 406~412[DOI]
- Assumma, L, "Effects of Block Length and Membrane Processing Conditions on the Morphology and Properties of Perfluorosulfonated Poly(arylene ester sulfone) Multiblock Copolymer Membranes for PEMFC", Applied Materials Interfaces, 7, pp.13808~13820 (2015)
- Ko, T.J, "High Performance Gas Diffusion Layer with Hydrophobic Nanolayer under a Supersaturated Operation Condition for Fuel Cells", Applied Materials Interfaces, 7, pp.5506~5513 (2015)
- Lewin, M, "Handbook of Fiber Science and Technology:Vol. III, High Technology Fibers: Part A" (1985), Marcel Dekker
- 임준우, "고온 양성자 교환막 연료전지용 열가소성 탄소 복합재료 분리판 개발", Composites Research, 29(5), pp.243~248 (2016), 한국복합재료학회
- Khandelwal, M, "Direct Measurement of Though-plane Thermal Conductivity and Contact Resistance in Fuel Cell Materials", Journal of Power Sources, 161, pp.1106~1115 (2006)
- Zamel, N, "Measurement of the Through-plane Thermal Conductivity of Carbon Paper Diffusion Media for the Temperature Range from -50 to +120oC", International Journal of Hydrogen Energy, 36(2), pp.12618~12625 (2011)
- Jeong, Y.G, "Microstructure and Performance of Multiwalled Carbon Nanotube", m-Aramid Composites Films as Electric Heating Elements, 2013, pp.5, 6527~6534
- 조준호, "탄소섬유 면상발열체의 발열 상태 분석을 위한영상처리 기술", 한국산학기술학회논문지, 19(2), pp.683~688 (2018), 한국산학기술학회[DOI]