카본 패브릭을 이용한 프리폼 성형에 대한 수치모사
Numerical Simulation of Preform Molding Using Carbon Fabric
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
프리폼 성형은 섬유 직조물을 이용한 RTM 성형에 있어서 매우 중요한 부분을 차지하고 있다. 탄소 섬유직조물의 프리폼의 변형은 소재의 강도에 영향을 미치며, 그 중 전단 잠김 각도를 넘어서는 힘이 작용하게 되면제품에 주름이 발생되어 RTM공정 시 불량발생의 원인이 된다. 그러므로 본 연구에서는 탄소섬유직조물의 전단변형 허용치를 정량화하고 실제 직조물의 성형과 수치모사를 이용하여 성형 특성을 검증하고자 한다. 그 결과 섬유 방향의 설정에 따른 주름의 특성을 확인하고 그 결과를 평가하였다. 앞에 언급한 물성 측정 결과들을 이용하여 수치해석을 수행하였고, 이 결과를 실험 결과와 비교 분석하였다.
Abstract
Preforming is crucial in resin transfer molding process using woven fabric. When shear deformation exceeds the locking angle, wrinkles are generated in the preform, which causes defects in the RTM process. Therefore, in this study, the allowable shear deformation limit of carbon fiber woven fabrics is quantified and the molding characteristics are verified using the actual fabric forming. As a result, the characteristics of creases according to the layer setups have been examined and the results have been discussed. Numerical analyses have been also performed using measured shear properties. These results have been compared with the experimental results.
참고문헌 (20)
- 윤재득, "FRP의 원통형 압력 용기제작을 위한 필라멘트 밴드의 감김 시뮬레이션", 한국CDE학회 논문집, 19(1), pp.19~28 (2014), 한국CDE학회[DOI]
- Grujicic, M., "Non-isothermal Preform Infiltration during the Vacuum-assisted Resin Transfer Molding(VARTM)Process", Applied Surface Science, 245(1-4), pp.51~64 (2005)
- Guo, Q. W., "Study on the Processibility of BMI for RTM Process and Mechanical Performance of Carbon Fiber Three-Dimension and Five-direction Braided", BMI Composites, 2010, pp.139, 94~97
- Nguyen, N., "In situ Curing and Out-of-autoclave of Interply Carbon Fiber", carbon Nanotube Buckypaper Hybrid Composites Using Electrical Current, 2016, pp.18(11), 1906~1912
- Chen, J. J., "The Optimization of Carbon Fiber Drawing Process Based on Cooperative Immune Clonal Selection Algorithm", Advanced Materials Research, 681, pp.304~308 (2013)
- 성낙봉, "전자 기기의 유해 전자파 차폐를 위한 친환경 제품 디자인 활용도 분석", 한국콘텐츠학회 논문지, 11(9), pp.129~136 (2011), 한국콘텐츠학회
- Hamidi, Y. K., "Process Induced Defects in Liquid Molding Processes of Composites", International Polymer Processing, 32(5), pp.527~544 (2017)
- Jung, Y., "Numerical Simulation of RTM Process Using the Extended Finite Element Method Combined with the Level Set Method", Journal of Reinforced Plastics and Composites, 32(5), pp.308~317 (2013)
- Oliveira, I. R. D., "Numerical Analysis of the Resin Transfer Molding Process via PAM-RTM Software", Defect and Diffusion Forum, 365, pp.88~93 (2015)
- Gelin, J.C, "Manufacture of Thin Composite Structures by the RTM Process:Numerical Simulation of the Shaping Operation", Composites Science and Technology, 56(7), pp.711~718
- Liang, B., "Analysis of Thermoplastic Prepreg Bending Stiffness during Manufacturing and of Its Influence on Wrinkling Simulations", Composites Part A : Applied Science and Manufacturing, 67, pp.111~122 (2014)
- Han, M. G., "Draping Simulation of Carbon", epoxy Plain Weave Fabrics with Non-orthogonal Constitutive Model and Material Behavior Analysis of the Cured Structure, 2018, pp.110, 172~182
- Rodgers, W. R., "Numerical Simulation with Experimental Validation of the Draping Behavior of Woven Fabrics", Proceedings of the American Society for Composites—Thirty-second Technical Conference (2017)
- Cherouat, A., "Geometrical and Mechanical Draping of Composite Fabric", Revue Européenne des Eléments, 14(6-7), pp.693~707 (2005)
- Boisse, P., "Simulation of Wrinkling during Textile Composite Reinforcement Forming. Influence of Tensile, In-plane Shear and Bending Stiffnesses", Composites Science and Technology, 71(5), pp.683~692 (2011)
- Wang, P., "Textiles for Advances Applications" (2017)
- Lin, H., "Predictive Modelling for Optimization of Textile Composite Forming", Composites Science and Technology, 67(15-16), pp.3242~3252 (2007)
- Okine, R. K., "Analysis of Forming Parts from Advanced Thermoplastic Composite Sheet Materials", Journal of Thermoplastic Composite Materials, 2(1), pp.50~76 (1989)
- Creech, G., "Meso-modelling of Non-crimp Fabric Composites for Coupled Drape and Failure Analysis", Journal of Materials Science, 41(20), pp.6725~6736
- Ye, L., "Characteristics of Woven Fibre Fabric Reinforced Composites in Forming Process", Composites Part A: Applied Science and Manufacturing, 28(9-10), pp.869~874 (1997)