용융가압함침공정으로 제조된 TiC 세라믹 입자 강화 철강복합재의 염수환경에서의 부식 특성
Corrosion Behaviors of TiC Ceramic Particulate Reinforced Steel Composites Fabricated by Liquid Pressing Infiltration Process in Salt Water Environment
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 용융가압함침공정을 이용하여 제조된 TiC 세라믹 입자강화 철강복합재를 제조하고 상용구상흑연주철과 비교를 위하여 미세조직 분석 및 경도 등 기초물성과 선박 해양 분야등의 적용가능성 검토를 위하여 염수환경에서의 부식 특성에 관한 연구를 진행하였다. 염수환경에서의 부식특성 비교 결과 구상흑연주철 대비 부식전위와 부식전류밀도 모두 낮은 값을 나타내었고, 낮은 연간부식률을 통하여 TiC-Fe 금속복합재의 내식성이 더 뛰어난 것을 확인하였다.
Abstract
In this study, TiC ceramic particulate reinforced steel composites was fabricated using a liquid pressing infiltration process. Studies were conducted on microstructure analysis and basic physical properties such as hardness and corrosion characteristics in salt water environment for comparison with commercial nodular cast iron. As a result of comparison of corrosion characteristics in a salt water environment, both corrosion potential and corrosion current density were lower than that of ductile graphite cast iron. The lower calculated corrosion rate confirms that the TiC-Fe metal composite has superior corrosion resistance than the cast iron.
참고문헌 (13)
- Qi, Q., "Promising Metal Matrix Composites(TiC", Ni–Cr)for Intermediate-temperature Solid Oxide Fuel Cell(SOFC)Interconnect Applications, 2015, pp.109, 56~60
- Oh, N. R., "Characterization of Microstructure and Tensile Fracture Behavior in a Novel Infiltrated TiC–steel Composite", Scripta Materialia, 112, pp.123~127 (2016)
- 오누리, "TiC-SKD11 함침 복합재의 온도에 따른 인장 특성과 파괴거동 변화", 대한금속·재료학회지, 55(3), pp.156~164 (2017), 대한금속·재료학회[DOI]
- Cho, S., "Effect of TiC Addition on Surface Oxidation Behavior of SKD11 Tool Steel Composites", Applied Surface Science, 415, pp.155~160 (2017)
- 조승찬, "용융가압함침 공정으로 제조한 TiC-SKD11 복합재료의 미세조직 및 내마모 특성", Composites Research, 30(3), pp.209~214 (2017), 한국복합재료학회
- Jam, A., "TiC-based Cermet Prepared by High-energy Ball-milling and Reactive Spark Plasma Sintering", Ceramics International, 43(2), pp.2448~2455 (2017)
- 이용희, "Fe-TiC 복합재료분말의 방전플라즈마소결", 한국분말재료학회지, 21(5), pp.382~388 (2014), 한국분말재료학회
- Wang, Z., "Microstructure and Properties of TiC-high Manganese Steel Cermet Prepared by Different Sintering Processes", Journal of Alloys and Compounds, 650(25), pp.918~924 (2015)
- Kim, Y. -I., "In-situ fabrication of TiC-Fe3Al Cermet", Ceramics International, 43(8), pp.5907~5913 (2017)
- Wang, Z., "Microstructure and Properties of TiC-high Manganese Steel Cermet Prepared by Different Sintering Processes", Journal of Alloys and Compounds, 650(25), pp.918~924 (2015)
- Lee, Y. -H., "Effect of TiC Particle Size on High Temperature Oxidation Behavior of TiC Reinforced Stainless Steel", Applied Surface Science, 480, pp.951~955 (2019)
- Cho, S., "Highly Improved Oxidation Resistance of TiCSKD11Composite by SiC", TiB2 Based Hybrid Coating, 2018, pp.448, 407~415
- Jones, D. A., "Principles and Prevention of Corrosion", pp.75~77 (1996), PrenticeHall