CFRP 파이프의 와인딩 적층 패턴 설계 및 HNT 나노입자 보강에 따른 수 환경에서의 기계적 물성 평가
Comparison of Mechanical Properties on Helical/Hoop Hybrid Wound HNT Reinforced CFRP Pipe with Water Absorption Behavior
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
유체 이송에 사용되는 강재 파이프는 신설과 도장, 또는 부식과 노후화로 인한 제반 시설 보수에 거대한 규모의 시간과 비용이 요구된다. 이에 본 연구에서는 강재 파이프의 대체재로, 내부식성과 내화학성이 우수한 탄소섬유강화복합재료(Carbon Fiber Reinforced Plastic, CFRP) 파이프 구조의 최적화 설계를 수행하였다. 헬리컬 패턴 표면에 후프 패턴을 혼합적층하여 내구성을 향상시켰으며, 수분 환경에서의 에폭시 흡습 현상을 억제하기 위해, 할로이사이트 나노튜브(Halloysite Nanotube, HNT)를 첨가하였다. HNT/CFRP 파이프는 필라멘트 와인딩 공정으로 제작하였으며, 기계적 물성 시험과 70°C 고온 증류수 환경하에서 흡습 시험을 진행하였다. 그 결과, 파이프 두께의 0.6%에 해당하는 후프 패턴의 적층 시, 가장 우수한 물성을 나타냈다. 또한 0.5 wt.% HNT 첨가 시 상대적으로 높은 내흡습성을 가졌으며, 층간 계면에서의 박리 현상이 지연되어 가장 낮은 강도 저하율을 보였다.
Abstract
Currently, fluid transfer steel pipes take a lot of time and expense to maintain all facilities due to new construction and painting or corrosion and aging. Therefore, this study was conducted for designing a CFRP pipe structure with high corrosion resistance and chemical resistance as a substitute for steel pipes. The helical/hoop pattern was cross-laminated to improve durability, and HNT was added to suppress the moisture absorption phenomenon of the epoxy. The HNT/CFRP pipe was manufactured by a filament winding process, and performed a mechanical property test, and a moisture absorption test in distilled water at 70°C. As a result, the highest bending strength was obtained when the hoop pattern was laminated with a thickness equivalent to 0.6% of the pipe. The 0.5 wt% HNT specimen had the highest moisture absorption resistance. Also, the delamination phenomenon at the interlayer interface was delayed, resulting in the lowest strength reduction rate.
참고문헌 (19)
- Anwar, M., "Application of Carbon Fiber-based Composite for Electric Vehicle", Advanced Materials Research, 896, pp.574~577 (2014)
- Noh, H. S., "A Study on the Fracture Toughness of Glass-Carbon Hybrid Composites", Bulletin of the Korean Society of Fisheries Technology, 28(3), pp.295~305 (1992)
- Meng, X. J., "Application of Carbon Fiber Reinforcement Technology in Pipe with Local Thinning Defects", Xiandai Huagong, 2015, pp.35(8), 144~146
- Imakita, A., "Fatigue Strength of CFRP Pipes Using High Modulus Carbon Fiber", Proceedings of the Japan International Sampe Symposium, 5, pp.993~998 (1997)
- Liu, Y.L, "Research on Failure Mechanism of Carbon Fiber Composite Materials Basing on Acoustic Emission", Proceedings of the ASME Pressure Vessels and Piping Conference, 1B, pp.V01BT01A00~ (2013)
- Hwang, T. K., "Probabilistic Deformation and Strength Prediction dor a Filament Wound Pressure Vessel", Composite Part B, 34(5), pp.481~497 (2003)
- 문철진, "외부 수압을 받는 필라멘트 와인딩 후판 복합재 원통의 좌굴 연구", 한국항공우주학회지, 37(2), pp.147~155 (2009), 한국항공우주학회
- Özbek, Ö, "Hoop Tensile and Compression Behavior of Glass-carbon Intraply Hybrid Fiber Reinforced Filament Wound Composite Pipes", Materials Testing, 61(8), pp.763~769 (2019)
- Judd, N. C. W., "Absorption of Water into Carbon Fibre Composiotes", British Polymer Journal, 9(1), pp.36~40 (1977)
- Miyano, Y., "Accelerated Testing for Long-term Durability of GFRP Laminates for Marine Use", Composite Part(B), 35(6-8), pp.497~502 (2004)
- Liao, K., "Effects of Environmental Aging on the Properties of Pultruded GFRP", Composite Part(B), 30(5), pp.485~493 (1999)
- 김윤해, "흡습 환경 하의 폴리프로필렌", 유리 섬유강화 복합재료의 환경 열화 특성, 2016, pp.30(6), 520~525[DOI]
- Liu, M., "Recent Advance in Research on Halloysite Nanotubes-polymer Nanocomposite", Progress in Polymer Science, 39(8), pp.1498~1525 (2014)
- Crini, G., "Kinetic and Equilibrium Studies on the Removal of Cationic Dyes from Aqueous Solution by Adsorption onto a Cyclodextrin Polymer", Dyes and Pigments, 77(2), pp.415~426 (2008)
- Lee, J. W., "Improvement of Interfacial Adhesion of Incorporated Halloysite-nanotubes in Fiber-reinforced Epoxy-based Composites", Applied Sciences, 7(5), pp.441~ (2017)
- Kim, G. S., "The Influence of Water Environment on the Mechanical Properties of Carbon", Epoxy Reinforced Composite Materials, 1993, pp.17(2), 52~59
- 권동준, "손상감지용 CNT 나노복합재료의 손상 감지능 및 보강효과 연구", Composites Research, 27(6), pp.219~224 (2014), 한국복합재료학회
- Tan, X., "Biochar-based Nano-composites for the Decontamination of Wastewater : A Review", Bioresource Technology, 212, pp.318~333 (2016)
- Choi, J.S, "Analysis of Nanoparticle Strengthening Effect and Water Absorption Behavior on Helical", Hoop Cross-laminated HNT-CFRP Composite Pipe Using Filament Winding, Korea Maritime and Ocean University, 2017