Zirconia 입자의 첨가가 페놀 수지의 경화거동에 미치는 영향
Effect of Zirconia Particle Addition on Curing Behavior of Phenolic Resins
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구는 Zirconia(zirconium oxide) 입자가 페놀수지 경화거동에 미치는 영향을 조사하였다. Zirconia 입자의 함량에 따른 페놀수지의 승온 및 등온 경화 거동을 분석하였다. Zirconia 함량을 달리한 페놀수지의 점도 및 열분해 특성을 조사하였다. DSC 분석으로부터 경화도와 경화율을 구하였다. 마지막으로 Zirconia 입자가 첨가된 페놀수지의 DSC 데이터로부터 경화 반응에 대한 활성화 에너지를 계산하였다. 그 결과 zirconia 함량이 높을수록 경화가 지연되고 경화에 필요한 활성화에너지가 더 커지는 경향이 나타났다. 또한 TGA를 이용한 열분해 분석 결과 Zirconia의 함량이 증가할수록 더 적은 중량감소가 관찰됐다. Carbon/Phenol 프리프레그의 표면 점착성은 Zirconia 함량에 따라 부분적으로 변화하였으나 유의한 영향은 없었다.
Abstract
This study investigated the effect of addition of zirconia(zirconium oxide) powder on the curing behavior of phenolic resins. The heating rate controlled curing and isothermal curing behaviors of the phenol resin according to the content of the zirconia powder were analyzed. The viscosity and thermal decomposition characteristics of the phenolic resin with the zirconia content were also examind. From the DSC analysis, the degree of cure and the rate of cure were obtained. Finally, the activation energy for the cure reaction were calculated from the DSC data of the zirconia added phenolic resin. As a found, the higher the zirconia content, the longer the curing was delayed and the greater the activation energy required for curing. Additionally, the TGA result that as the content of zirconia increased, less weight loss was observed. The surface tackiness of the Carbon/Phenol prepreg was partially changed according to the zirconia content, but had no significant effect.
참고문헌 (15)
- Chow, S., "Comparisons of the Cure of Phenolformaldehyde Novolac and Resol Systems by Differential Scanning Calorimetry", Journal of Applied Polymer Science, 23, pp.1973~1985 (1979)
- 박용빈, "풀아웃 하중을 받는 복합재 샌드위치 체결부의 파손거동 연구", Composites Research, 24(1), pp.17~23 (2011), 한국복합재료학회
- Choi, M. H., "Effect of Curing Kinetics on the Cross-link Density and Mechanical Property of Resol Type of Phenolic Resin", Journal-Korean Institute of Chemical Engineers, 36, pp.399~406 (1998)
- Lei, Y., "Cure Kinetics of Aqueous Phenol-Formaldehyde Resins Used for Oriented Strandboard Manufacturing : Analytical Technique", Journal of Applied Polymer Science, 100, pp.1642~1650 (2006)
- Kim, Y. C., "Kinetics of Pyrolysis Degradation of Cured Phenol Resin(SC-1008)", Agency for Defense Development, pp.137~144 (1996)
- 엄세연, "Mercaptan 경화제에 의한 저온속경화 에폭시의 경화거동에 관한 연구", 폴리머, 37(2), pp.240~248 (2013), 한국고분자학회[DOI]
- 박동철, "액상성형공정별 물리적", 기계적 특성 비교 평가, 2018, pp.31(6), 304~310[DOI]
- Kravchenko, O. G., "Chemical and Thermal Shrinkage in Thermosetting Prepreg", Composites:Part A, 80, pp.72~81 (2016)
- Lee, Y. K., "Activation Energy and curing Behavior of Resol-and Novolac-Type Phenolic Resins by Differential Scanning Calorimetry and Thermogravimetric Analysis", Journal of Applied Polymer Science, 89, pp.2589~2596 (2003)
- Cartié, D. D. R., "Effect of Z-fibresTM on the Delamination Behaviour of Carbon Fibre", epoxy Laminates, Cranfield University, 2000
- Won, J. S., "Study on Cure Behavior and Thermal Decompositon Characteristics of High Temperature Phenolic Resin", KSPE Spring Conference, pp.640~643 (2015)
- Lee, Y. K., "Activation Energy and curing Behavior of Resol-and Novolac-Type Phenolic Resins by Differential Scanning Calorimetry and Thermogravimetric Analysis", Journal of Applied Polymer Science, 89, pp.2589~2596 (2003)
- Markovic, S., "Dynamic Mechamical Analysis Study of the curing of Phenol-Formaldehyde Novolac Resins", Journal of Applied Polymer Science, 81, pp.1902~1903 (2001)
- Liu, Q., "Recent Developments in the Flame-Retardant System of Epoxy Resin", Materials, 13, pp.2145~ (2020)
- Michon, C., "Concentration Dependence of the Critical Viscoelastic Properties of Gleatin at the Gel Point", Pheologica Acta, 32, pp.94~103 (1993)