Solvent 별 분산에 따른 Milled Carbon Fiber의 배열성 연구
Effect of the Alignment of Milled Carbon Fiber Dispersed in Various Solvents
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
전자기기 발열을 효율적으로 제어하기 위해 열전도성 복합재료에 대한 많은 연구가 진행되고 있다. 본 연구에서는 solvent 별 분산에 따른 carbon fiber의 배열성 관계를 알아보기 위해 Milled Carbon Fiber를 4가지 Solvent에 분산하고 Vacuum filtration 방법을 통해 탄소섬유강화 복합재료(CFRP)를 제작하였다. CFRP의 배열성을 알아보기 위해 광학현미경 관측과 섬광법을 통한 열전도도를 측정하였다. NMP와 Ethanol을 Solvent로 사용하여 성형한 CFRP의 평면두께방향 열전도도가 각각 10.79 W/mK, 10.57 W/mK 값을 보였고 이는 평면내부방향 열전도도에 비해 218%, 209% 향상된 결과를 보였다. Solvent의 상대적으로 높은 점도 값은 solvent 유체의 높은 전단력에 영향을 주어 성형 시 필러의 배열성을 결정하는데 영향을 주는 것으로 판단된다.
Abstract
In order to efficiently control the heat generation of electronic devices, many research has been conducted on thermally conductive composite materials. In this study, milled carbon fiber was dispersed in four solvent to investigate the relationship of carbon fiber alignment according to dispersion by solvents, and carbon fiber-reinforced composite material(CFRP) was manufactured using vacuum filtration. To evaluate the arrangement of CFRP the arrangement of the prepared specimen was observed under an optical microscope, and thermal conductivity was measured by Laser Flash Analysis. The Through-plane thermal conductivity of CFRP using NMP and Ethanol was 10.79 W/mK and 10.57 W/mK respectively, which were improved by 218% and 209% compared to the In-plane thermal conductivity. The high viscosity of the solvent greatly affects the shear of the fluid, and it seemed to determine the alignment of the filler.
참고문헌 (15)
- 홍현기, "탄소섬유강화 복합소재의 열적, 전기적, 기계적 특성에 대한 질화붕소 첨가제의 효과", Composites Research, 33(3), pp.153~160 (2020), 한국복합재료학회[DOI]
- Zakaria, M. Y., "Effect of the Addition of Milled Carbon Fiber as a Secondary Filler on the Electrical Conductivity of Graphite", epoxy Composites for Electrical Conductive Material, 2015, pp.83, 75~80
- 김성륜, "탄소섬유 직물 및 전도성 탄소 필러가 고충진 된 열가소성 탄소섬유강화플라스틱의 전도 특성", Composites Research, 34(5), pp.290~295 (2021), 한국복합재료학회[DOI]
- 이재열, "탄소섬유 복합재를 이용한 경량 착용형 로봇의 개발", Composites Research, 28(3), pp.81~88 (2015), 한국복합재료학회
- Khan, Z. I., "Comparative Study on the Enhancement of Thermomechanical Properties of Carbon Fiber and Glass Fiber Reinforced Epoxy Composites", Materials Today : Proceedings, 39, pp.956~958 (2021)
- 조희근, "CNT와 Graphite 나노", 마이크로 입자 배열에 의한 나노복합재의 제작과 기계적 강성 및 방사능 차폐 특성 평가, 2013, pp.26(6), 355~362[DOI]
- Jung, S. Y., "Effects of Alignment of Graphene Flakes on Water Permeability of Graphene-epoxy Composite Film", 2014 IEEE 64th Electronic Components and Technology Conference (ECTC) (2014), IEEE
- Choi, B. K., "Effect of Carbon Fiber Content on Thermal and Electrical Conductivity, EMI Shielding Efficiency, and Radiation Energy of CMC", PVA Composite Papers with Carbon Fibers, 2021, pp.273, 116708~
- Jiang, Y., "Enhanced Thermal Conductivity and Ideal Dielectric Properties of Epoxy Composites Containing Polymer Modified Hexagonal Boron Nitride", Composites Part A : Applied Science and Manufacturing, 107, pp.657~664 (2018)
- Shahil, K. M. F., "Graphene-based Thermal Interface Materials", 2011 11th IEEE International Conference on Nanotechnology (2011), IEEE
- Zheng, X., "Enhancement of Thermal Conductivity of Carbon Fiber-reinforced Polymer Composite with Copper and Boron Nitride Particles", Composites Part A : Applied Science and Manufacturing, 121, pp.449~456 (2019)
- Li, M., "Stress Induced Carbon Fiber Orientation for Enhanced Thermal Conductivity of Epoxy Composites", Composites Part B : Engineering, 208, pp.108599~ (2021)
- Li, Q., "Ultrahigh Thermal Conductivity of Assembled Aligned Multilayer Graphene", epoxy Composite, 2014, pp.26(15), 4459~4465
- Barton, A. F. M., "CRC Handbook of Solubility Parameters and other Cohesion Parameters" (2017), Routledge
- Konios, D., "Dispersion Behaviour of Graphene Oxide and Reduced Graphene Oxide", Journal of Colloid and Interface Science, 430, pp.108~112 (2014)