본문 바로가기
KERD
논문KCI 등재

탄소나노튜브 코팅횟수에 따른 항공기용 탄소나노튜브/ 테프론-폴리우레탄 탑코트의 표면소수성 및 부착력 평가

Hydrophobicity and Adhesion Evaluation of MWCNT/ Teflon-polyurethane Topcoat for Aircraft with Different MWCNT Coating Times

1

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류재료공학

초록

본 연구에서는 항공기 방빙을 위해서 탄소계 소수성 입자인 탄소나노튜브의 코팅 횟수에 따른 테프론-폴리우레탄 탑코트의 나노입자 부착력과 표면 소수성 특성을 평가하기 위하여 실험을 진행하였다. 나노입자 부착력을 측정하기 위해서 인발접착시험을 진행하였고, 표면소수성 특성을 측정하기 위해서 정적접촉각 시험과 거칠기 평가를 진행하였다. 거칠기평가를 통하여 탄소나노튜브가 테프론-폴리우레탄 탑코트에 함침된 정도를 할 수 있었고, USB-현미경을 통하여 테프론-폴리우레탄 탑코트에 탄소나노튜브가 함침 및 분산정도를 확인하였다. 그 결과 코팅횟수가 많을수록 탄소나노튜브가 응집되고 이에 의하여 접착력이 감소한다는 것을 확인하였다. 실험결과 코팅 횟수에 따라 테프론-폴리우레탄의 소수성은 커지고 접착력은 감소하였다. 그로 인해 테프론-폴리우레탄 탑코트 와의 접착력 향상과 최적화된 소수성을 가지는 탄소나노튜브의 코팅횟수를 파악할 수 있었다.

Abstract

This work presents an experiment study to evaluate the nanoparticle adhesion and surface hydrophobicity characteristics of Teflon-polyurethane top coat depending on the number of multi-wall carbon nanotube (MWCNT) coatings, which is a carbon-based hydrophobic particle. In order to measure the adhesion between the nanoparticles and the top coat, adhesion pull-off test was performed with different MWCNT oxidation times. Static contact angle and roughness measurements were carried out to characterize the surface hydrophobic behavior. Through the roughness evaluation, it was confirmed that the carbon nanotubes were wetted in the Teflon-polyurethane top coat, and the degree carbon nanotube wetting was confirmed through a USB-microscope. As a result, it was found that the larger the degree of wetting, the better the adhesion. From the experimental results, as the hydrophobicity of Teflon-polyurethane increased, the adhesive property decreased with the number of coatings. It was possible to improve the adhesive force and determine the number of coatings of carbon nanotubes with optimized hydrophobicity.

참고문헌 (19)

  1. Cao, Y., "Aircraft Icing : An Ongoing Threat to Aviation Safety", Aerospace Science and Technology, 75, pp.353~385 (2018)
  2. Yao, Y., "Experimental and Numerical Study on the Impact and Freezing Process of a Water Droplet on a Cold Surface", Applied Thermal Engineering, 137, pp.83~92 (2018)
  3. Caliskan, F., "A Review of In-flight Detection and Identification of Aircraft Icing and Reconfigurable Control", Progress in Aerospace Sciences, 60, pp.12~34 (2013)
  4. 김종현, "항공기용 3종류 나노입자들로 함침된 폴리우레탄 탑코트의 접착성, 소수성 및 색재현성 특성평가", 접착 및 계면, 22(1), pp.16~21 (2021), 한국접착및계면학회[DOI]
  5. Laforte, J. L., "State-of-the-art on Power Line De-icing", Atmospheric Research, 46(1-2), pp.143~158 (1998)
  6. Khadka, A., "Effects of Superhydrophobic Coatings on De-icing of Carbon Fiber-reinforced Composite Aircraft", Ph.D, pp.2017
  7. Considerations on the Use of Hydrophobic, Superhydrophobic or Icephobic Coatings as a Part of the Aircraft Ice Protection System, "Fortin, G.", SAE, ~, pp.SAE Technical Paper, 2013-01-2108 (2013)
  8. Rose, B. R., "Experimental Investigation on the Alternate Coating Method for Aircraft Anti-icing Applications", Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 231(3), pp.407~418 (2017)
  9. Morita, K., "Hydrophobic Coating Study for Anti-icing Aircraft", Proceeding of the 63rd Annual Meeting of the APS Division of Fluid Dynamics, Longbeach, California (2010)
  10. Zhang, B. J., "Dropwise Steam Condensation on Various Hydrophobic Surfaces : Polyphenylene Sulfide(PPS), Polytetrafluoroethylene(PTFE), and Self-assembled Micro", nano Silver(SAMS), 2015, pp.89, 353~358
  11. Yao, W., "Transparent, Conductive, and Superhydrophobic Nanocomposite Coatings on Polymer Substrate", Journal of Colloid and Interface Science, 506, pp.429~436 (2017)
  12. 김종현, "탄소나노튜브의 함량에 따른 항공기용 탄소나노튜브", 폴리우레탄 탑코트의 접착 및 전기적 특성 평가, 2020, pp.33(1), 1~6[DOI]
  13. Ma, L., "An Experimental Study on the Durability of Icephobic Slippery Liquid-infused Porous Surfaces (SLIPS) Pertinent to Aircraft Anti-", de-icing, 2018, 3654~
  14. Yu, Y., "A Promising Self-assembly PTFE Coating for Effective Large-scale Deicing", Progress in Organic Coatings, 147, pp.105732~ (2020)
  15. Choi, J. Y., "Precise Static Contact Angle Measurements Using Pythagolas Rule", Journal of Adhesion and Interface, 15(2), pp.57~62 (2014)
  16. Wang, Z. J., "Surface Control and Cryogenic Durability of Transparent CNT Coatings on Dip-coated Glass Substrates", Journal of Colloid and Interface Science, 386(1), pp.415~420 (2012)
  17. Wen, M., "The Electrical Conductivity of Carbon Nanotube", carbon Black, Polymer, pp.2012, 53(7)[DOI]
  18. Bourrat, X., "Electrically Conductive Grades of Carbon Black : Structure and Properties", Carbon, 31(2), pp.287~302 (1993)
  19. Yao, W., "Transparent, Conductive, and Superhydrophobic Nanocomposite Coatings on Polymer Substrate", Journal of Colloid and Interface Science, 506, pp.429~436 (2017)

관련 논문AI추천

탄소나노튜브의 함량에 따른 항공기용 탄소나노튜브/폴리우레탄 탑코트의 접착 및 전기적 특성 평가김소연, 김종현, 박종만, 신평수한국복합재료학회 · Composites Research2020 · 제33권 제1호항공기용 3종류 나노입자들로 함침된 폴리우레탄 탑코트의 접착성, 소수성 및 색재현성 특성평가권동준, 김종현, 박종만한국접착및계면학회 · 접착 및 계면2021 · 제22권 제1호선경화 시간에 따른 항공기 De-icing용 나노실리카/폴리우레탄 복합재료 탑코트의 소수성 및 접착특성 평가권동준, 김종현, 박종만, 신평수한국복합재료학회 · Composites Research2020 · 제33권 제6호젖음성 및 전기저항 측정을 이용한 플라즈마 처리된 단일 탄소섬유 강화 탄소나노튜브-페놀수지 나노복합재료의 계면접착력 향상구가영, 권동준, 박종규, 박종만, 왕작가, 이우일한국접착및계면학회 · 접착 및 계면2011 · 제12권 제3호고강도, 고강성, 그리고 유연한 탄소나노튜브 버키페이퍼-폴리우레탄 나노복합체김융암, 임다운, 정용채, 하유미한국복합재료학회 · Composites Research2016 · 제29권 제4호전기저항 평가법을 이용한 CNT 함유 에폭시의 탄소섬유내 젖음성 및 계면특성 예측 연구권동준, 박종규, 박종만, 신평수, 이민경, 이형익, 최진영한국복합재료학회 · Composites Research2015 · 제28권 제4호

이 간행물의 다른 논문 (9건)