미소 구조 물성의 확률적 분포를 고려한 하이브리드 성형 공정 연계 멀티스케일 구조 해석
Multi-scale Process-structural Analysis Considering the Stochastic Distribution of Material Properties in the Microstructure
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 논문은 멀티스케일 공정-구조 해석의 방법론을 제안하고 단섬유층과 직물층으로 이루어진 배터리 하우징 파트에 적용한다. 특별히 마이크로스케일 대표체적요소(RVE: Representative Volume Element)안 기지의 불확정성을 고려하였다. 마이크로스케일의 RVE내 기지 물성의 랜덤한 공간내 분포는 KLE(Karhunen-Loeve Expansion)을 통해 구현하였다. 공간상 랜덤분포된 기지 물성을 갖는 RVE의 유효 물성을 전산균질화를 통해 얻어 매크로스케일 유한요소 모델에 매핑하였다. 또한 하이브리드 공정해석을 통해 압축 성형 해석으로부터 얻은 잔류응력과 섬유배향을 매핑한 유한요소 모델과 드레이핑 공정 해석결과로부터 얻어진 섬유배향을 매핑한 모델을 결합하였다. 본 연구에 제안된 방법은 배터리 하우징 뿐만 아니라 다양한 재료 구성을 갖는 복합재료의 공정-구조해석을 통해 설계요구도를 엄밀하게 평가할 수 있을 것이라 기대된다.
Abstract
This paper proposes a multiscale process-structural analysis methodology and applies to a battery housing part made of the short fiber-reinforced and fabric-reinforced composite layers. In particular, uncertainties of the material properties within the microscale representative volume element (RVE) were considered. The random spatial distribution of matrix properties in the microscale RVE was realized by the Karhunen-Loeve Expansion (KLE) method. Then, effective properties of the RVE reflecting on spatially varying matrix properties were obtained by the computational homogenization and mapped to a macroscale FE (finite element) model. Morever, through the hybrid process simulation, a FE (finite element) model mapping residual stress and fiber orientation from compression molding simulation is combined with one mapping fiber orientation from the draping process simulation. The proposed method is expected to rigorously evaluate the design requirements of the battery housing part and composite materials having various material configurations.
참고문헌 (16)
- 장영진, "유리섬유", 폴리프로필렌 복합원사의 유리섬유 함량 변화에 따른 열가소성 복합재료의 함침 및 기계적 특성 평가, 2020, pp.33(6), 346~352[DOI]
- Sun, C., "Experimental and Numerical Investigations on Thermoforming of Thermoplastic Prepregs of Glass Fiber Reinforced Nylon 6", Journal of Materials Processing Technology, 295, pp.117161~ (2021)
- 곽성훈, "속경화용 탄소섬유", 에폭시 프리프레그의 다단 압축 성형기술, 2021, pp.34(5), 269~276[DOI]
- Santos, A. C. M. Q. S., "Porosity Characterization and Respective Influence on Short-beam Strength of Advanced Composite Processed by Resin Transfer Molding and Compression Molding", Polymers and Polymer Composites, 29(8), pp.1353~1362 (2021)
- Kumar, V., "High-performance Molded Composites Using Additively Manufactured Preforms with Controlled Fiber and Pore Morphology", Additive Manufacturing, 37, pp.101733~ (2021)
- Isaincu, A., "Numerical Investigation on the Influence of Fiber Orientation Mapping Procedure to the Mechanical Response of Short-fiber Reinforced Composites Using Moldflow, Digimat and Ansys Software", Materials Today : Proceedings, 45, pp.4304~4309 (2021)
- Song, Y., "Method to Account for the Fiber Orientation of the Initial Charge on the Fiber Orientation of Finished Part in Compression Molding Simulation", Composite Part A : Applied Science, 100, pp.244~254 (2017)
- Haanappel, S. P., "Formability Analyses of Uni-directional and Textile Reinforced Thermoplastics", Composite Part A : Applied Science, 56, pp.80~92 (2014)
- Khalid, M. Y., "Mechanical Characterization of Glass and Jute Fiber-based Hybrid Composites Fabricated Through Compression Molding Technique", International Journal of Material Forming, 14(5), pp.1~11 (2021)
- "Geodict Software 2022" (2022)[URL]
- Ghanem, R. G., "Stochastic Finite Elements : a Spectral Approach" (2003), Courier Corporation
- Shang, S., "Stochastic Finite Element with Material Uncertainties : Implementation in a General Purpose Simulation Program", Finite Elements in Analysis and Design, 64, pp.65~78 (2013)
- Advani, S. G., "The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites", Journal of Rheology, 31(8), pp.751~784 (1987)
- Hemmesi, K., "Numerical Evaluation of Surface Welding Residual Stress Behavior under Multiaxial Mechanical Loading and Experimental Validations", International Journal of Mechanical Sciences, 168, pp.105127~ (2020)
- Kim, C. H., "Determination of Residual Stresses in Injection-moulded Flat Plate : Simulation and Experiments", Polymer Testing, 26(7), pp.862~868 (2007)
- Parlevliet, P. P., "Residual Stresses in Thermoplastic Composites—A Study of the Literature—Part I : Formation of Residual Stresses", Composites Part A : Applied Science Manufacturing, 37(11), pp.1847~1857 (2006)