본문 바로가기
KERD
논문KCI 등재

미래모빌리티를 위한 차세대 경량구조복합재료 검토: 자기강화복합재료의 적용 가능성

Next Generation Lightweight Structural Composite Materials for Future Mobility Review: Applicability of Self-Reinforced Composites

김성륜|이혜성|장지운|오명준|김미나
한국복합재료학회 (The Korean Society For Composite Materials)|2023.02|Composites Research|제36권 제1호|pp. 1-15

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

탄소섬유강화복합재료Future mobilityCarbon fiber reinforced composite자기강화복합재료경량구조용소재미래모빌리티Self-reinforced compositeLightweight structural materials
주제분류재료공학

초록

미래모빌리티의 발전 기대에 따라 에너지 소비 절감에 대한 수요가 증가하고 있다. 경량구조용소재는 온실가스 배출 감소 및 에너지 효율 향상을 위한 방안으로 알려져 있다. 특히, 섬유강화복합재료 (FRP, fiber reinforced polymer composite)는 뛰어난 기계적 특성 및 낮은 무게로 인해 기존 합금을 대체할 수 있는 소재로 주목받는다. 본 논문에서는, 탄소섬유강화복합재료 (CFRP, carbon FRP) 및 자기강화복합재료 (SRC, self-reinforced composite)의 산업 적용 및 연구 동향을 강화재, 고분자 매트릭스 및 공정에 기반하여 검토하였다. 항공분야에서 주로 활용되는 에폭시 수지 기반 오토클레이브 공법의 높은 공정단가 및 긴 제조시간을 극복하기 위하여, 속경화성 에폭시 수지를 이용한 고압수지이송성형 공정으로 CFRP가 적용된 전기자동차의 양산을 보고하였다. 또한, 탄소섬유복합재료의 재활용 이슈를 해결하기 위한 열가소성 수지 기반 CFRP 및 계면 향상 방안들이 재료 및 공정 측면에서 검토되었다. FRP의 우수한 기계적 특성을 유도하는 주요한 요인으로 알려진 완벽한 매트릭스-강화재 계면을 형성하기 위하여, 고분자 섬유에 동일한 매트릭스를 함침시킨 SRC에 대한 연구들이 보고되고 있다. 다양한 열가소성 고분자에 기초한 SRC의 물리적 및 기계적 특성들을 고분자 배향 및 복합재료 구조 측면에서 검토하였다. 또한, 고연신 폴리프로필렌 섬유 기반 SRC의 공정창 확장을 위한 공중합체 매트릭스 전략이 논의되었다. 경량구조용소재의 CFRP 및 SRC 적용은 미래모빌리티의 에너지 효율 향상에 대한 잠재적인 선택을 제공할 수 있다.

Abstract

Demand for energy consumption reduction is increasing according to the development expectations of future mobility. Lightweight structural materials are known as a method to reduce greenhouse gas emissions and improve energy efficiency. In particular, fiber reinforced polymer composite (FRP) is attracting attention as a material that can replace existing metal alloys due to its excellent mechanical properties and light weight. In this paper, industrial applications and research trends of carbon fiber reinforced composites (CFRP, carbon FRP) and self-reinforced composites (SRC) were reviewed based on the reinforcement, polymer matrix, and manufacturing process. In order to overcome the expensive process cost and long manufacturing time of the epoxy resin-based autoclave method, which is mainly used in the aircraft field, mass production of CFRP-applied electric vehicles has been reported using a high-pressure resin transfer molding process including fast-curing epoxy. In addition, thermoplastic resin-based CFRP and interface enhancement methods to solve the recycling issue of carbon fiber composites were reviewed in terms of materials and processes. To form a perfect matrix-reinforcement interface, which is known as the major factor inducing the excellent mechanical properties of FRP, studies on SRC impregnated with the same matrix in polymer fibers have been reported. The physical and mechanical properties of SRC based on various thermoplastic polymers were reviewed in terms of polymer orientation and composite structure. In addition, a copolymer matrix strategy for extending the processing window of highly drawn polypropylene fiber-based SRC was discussed. The application of CFRP and SRC as lightweight structural materials can provide potential options for improving the energy efficiency of future mobility.

참고문헌 (79)

  1. 김기석, "항공기용 탄소섬유강화 복합재료의 기술동향", 엘라스토머 및 콤포지트, 46(2), pp.118~124 (2011), 한국고무학회
  2. Timmis, A. J., "Environmental Impact Assessment of Aviation Emission Reduction Through the Implementation of Composite Materials", The International Journal of Life Cycle Assessment, 20(2), pp.233~243 (2015)
  3. Irving, P. E., "Polymer Composites in Aerospace Industry" (2019), Woodhead Pub. Co
  4. Soutis, C., "Fibre Reinforced Composites in Aircraft Construction", Progress in Aerospace Sciences, 41(2), pp.143~151 (2005)
  5. Lee T.-H., "Applications of Carbon Fiber to the Aerospace", Proceeding of the 37th 2011 KSPE Fall Conference, pp.511~514 (2011)
  6. 김득주, "항공기용 복합소재의 개발 및 연구동향", 공업화학, 27(3), pp.252~258 (2016), 한국공업화학회
  7. Parveez, B., "Scientific Advancements in Composite Materials for Aircraft Applications : A Review", Polymers, 14(22), pp.5007~ (2022)
  8. Giurgiutiu, V., "Structural Health Monitoring of Aerospace Composites" (2015), Academic Press
  9. Campbell Jr, F. C., "Manufacturing Technology for Aerospace Structural Materials" (2011), Elsevier
  10. Lee, J. Y., "Advanced Carbon Fiber Composite Out-of-Autoclave Laminate Manufacture via Nanostructured out-of-Oven Conductive Curing", Composites Science and Technology, 166, pp.150~159 (2018)
  11. Centea, T., "A Review of Out-of-Autoclave Prepregs – Material Properties, Process Phenomena, and Manufacturing Considerations", Composites Part A : Applied Science and Manufacturing, 70, pp.132~154 (2015)
  12. Trzepieciński, T., "New Advances and Future Possibilities in Forming Technology of Hybrid Metal–Polymer Composites Used in Aerospace Applications", Journal of Composites Science, 5(8), pp.217~ (2021)
  13. Gruenfelder, L. K., "Void Formation in Composite Prepregs – Effect of Dissolved Moisture", Composites Science and Technology, 70(16), pp.2304~2309 (2010)
  14. Witik, R. A., "Economic and Environmental Assessment of Alternative Production Methods for Composite Aircraft Components", Journal of Cleaner Production, 29-30, pp.91~102 (2012)
  15. Sun, X., "Technology Development of Electric Vehicles : A Review", Energies, 13(1), pp.90~ (2020)
  16. Jacob, A., "BMW Counts on Carbon Fibre for Its Megacity Vehicle", Reinforced Plastics, 54(5), pp.38~41 (2010)
  17. Sarfraz, M. S., "Recent Developments in the Manufacturing Technologies of Composite Components and Their Cost-Effectiveness in the Automotive Industry : A Review Study", Composite Structures, 266, pp.113864~ (2021)
  18. "Kama Web Journal" (2016)[URL]
  19. Feraboli, P., "Development of Carbon", Epoxy Structural Components for a High Performance Vehicle, 2004, pp.35(4), 323~330
  20. Stewrt, R., "Rebounding Automotive Industry Welcome News for FRP", Reinforced Plastics, 55(1), pp.38~44 (2011)
  21. Fuchs, A. N., "Laser Cutting of Carbon Fiber Fabrics", Physics Procedia, 41, pp.372~380 (2013)
  22. Kim, M., "Industry Development Direction and Research Trend of the Carbon Fiber Reinforced Polymer (CFRP) Composite", Polymer Science and Technology, 31(6) (2020)
  23. Cicala, G., "Recyclable Epoxy Resins : an Example of Green Approach for Advanced Composite Applications", AIP Conference Proceedings, 1736(1), pp.020027~ (2016)
  24. Kim, R. -W., "Embedded Based Real-Time Monitoring in the High-Pressure Resin Transfer Molding Process for CFRP", Applied Sciences, 9(9), pp.1795~ (2019)
  25. "HP-RTM System", Dieffenbacher, ~
  26. Fais, C., "Lightweight Automotive Design with HP-RTM", Reinforced Plastics, 55(5), pp.29~31 (2011)
  27. Cheon, J., "Impact Resistance and Interlaminar Shear Strength Enhancement of Carbon Fiber Reinforced Thermoplastic Composites by Introducing MWCNT-Anchored Carbon Fiber", Composites Part B : Engineering, 217, pp.108872~ (2021)
  28. Zhang, J., "Current Status of Carbon Fibre and Carbon Fibre Composites Recycling", Composites Part B : Engineering, 193, pp.108053~ (2020)
  29. Zhang, J., "New Approaches to Bonding Thermoplastic and Thermoset Polymer Composites", Composites Part A : Applied Science and Manufacturing, 133, pp.105870~ (2020)
  30. Mcnally, T., "Recycled Carbon Fiber Filled Polyethylene Composites", Journal of Applied Polymer Science, 107(3), pp.2015~2021 (2008)
  31. Genna, S., "Increasing Adhesive Bonding of Carbon Fiber Reinforced Thermoplastic Matrix by Laser Surface Treatment", Polymer Engineering Science, 57(7), pp.685~692 (2017)
  32. Luo, H., "Preparation and Performance of Long Carbon Fiber Reinforced Polyamide 6 Composites Injection-Molded from Core", Shell Structured Pellets, 2014, pp.64, 294~300
  33. Montes-Morán, M. A., "Effects of Plasma Oxidation on the Surface and Interfacial Properties of Ultra-High Modulus Carbon Fibres", Composites Part A : Applied Science and Manufacturing, 32(3-4), pp.361~371 (2001)
  34. Liu, J., "A Surface Treatment Technique of Electrochemical Oxidation to Simultaneously Improve the Interfacial Bonding Strength and the Tensile Strength of PAN-Based Carbon Fibers", Materials Chemistry and Physics, 122(2-3), pp.548~555 (2010)
  35. Liu, H., "Effect of Polyetherimide Sizing Involving Carbon Nanotubes on Interfacial Performance of Carbon Fiber", Polyetheretherketone Composites, 2021, pp.32(9), 3689~3700
  36. Jang, J. -U., "Electrically and Thermally Conductive Carbon Fibre Fabric Reinforced Polymer Composites Based on Nanocarbons and an In-situ Polymerizable Cyclic Oligoester", Scientific Reports, 8(2), pp.7659~ (2018)
  37. Lee, H. S., "Design of Microwave Plasma and Enhanced Mechanical Properties of Thermoplastic Composites Reinforced with Microwave Plasma-Treated Carbon Fiber Fabric", Composites Part B : Engineering, 60, pp.621~626 (2014)
  38. Ono, M., "Mechanical Properties of Thermoplastic Composites Made of Commingled Carbon Fiber", Nylon Fiber, 2021, pp.13(19), 3206~
  39. Kim, S. W., "Effect of Caprolactam Modified Phenoxy-Based Sizing Material on Reactive Process of Carbon Fiber-Reinforced Thermoplastic Polyamide-6", Composites Part A : Applied Science and Manufacturing, 139, pp.106104~ (2020)
  40. Irisawa, T., "The Influence of Oxygen Containing Functional Groups on Carbon Fibers for Mechanical Properties and Recyclability of CFRTPs Made with In-Situ Polymerizable Polyamide 6", Composites Part A : Applied Science and Manufacturing, 112, pp.91~99 (2018)
  41. Li, Y., "A Review of the Electrical and Mechanical Properties of Carbon Nanofiller-Reinforced Polymer Composites", Journal of Materials Science, 54, pp.1036~1076 (2019)
  42. Kumar Amit, "A review on the mechanical properties of polymer composites reinforced by carbon nanotubes and graphene", Carbon Letters, 31(2), pp.149~165 (2021), 한국탄소학회[DOI]
  43. Trivedi, D. N., "Graphene and Its Application in Thermoplastic Polymers as Nano-Filler-A Review", Polymer, 240, pp.124486~ (2022)
  44. Ning, N., "Realizing the Enhancement of Interfacial Interaction in Semicrystalline Polymer", Filler Composites via Interfacial Crystallization, 2012, pp.37(10), 1425~1455
  45. Capiati, N. J., "The Concept of One Polymer Composites Modelled with High Density Polyethylene", Journal of Materials Science, 10, pp.1671~1677 (1975)
  46. Majola, A., "Absorbable Self-Reinforced Polylactide(SR-PLA)Composite Rods for Fracture Fixation : Strength and Strength Retention in the Bone and Subcutaneous Tissue of Aabbits", Journal of Materials Science : Materials in Medicine, 3, pp.43~47 (1992)
  47. Wright-Charlesworth, D. D., "Nanoindentation of Injection Molded PLA and Self-Reinforced Composite PLA after In Vitro Conditioning for Three Months", Journal of Biomedical Materials Research Part A, 74A(3), pp.388~396 (2005)
  48. Zakir Hossain, K. M., "The Effect of Cellulose Nanowhiskers on the Flexural Properties of Self-Reinforced Polylactic Acid Composites", Reactive and Functional Polymers, 85, pp.193~200 (2014)
  49. Gao, C., "Preparation and Characterization of Uniaxial Ppoly(lactic acid)-Based Self-Reinforced Composites", Composites Science and Technology, 117, pp.392~397 (2015)
  50. Kurokawa, N., "Thermomechanical Properties of Highly Transparent Self-Reinforced Polylactide Composites with Electrospun Stereocomplex Polylactide Nanofibers", Polymer, 153, pp.214~222 (2018)
  51. Hine, P. J., "Hot Compaction of Woven Poly(ethylene terephthalate)Multifilaments", Journal of Applied Polymer Science, 91(4), pp.2223~2233 (2003)
  52. Zhang, J. M., "All-Poly(ethylene terephthalate)Composites by Film Stacking of Oriented Tapes", Composites Part A : Applied Science and Manufacturing, 40(11), pp.1747~1755 (2009)
  53. Duhovic, M., "Nanofibrillar Single Polymer Composites of Poly(ethylene terephthalate)", Macromolecular Materials and Engineering, 295(2), pp.95~99 (2010)
  54. Jerpdal, L., "Influence of Temperature during Overmolding on the Tensile Modulus of Self-Reinforced Poly(ethylene terephthalate)Insert", Journal of Applied Polymer Science, 137(5), pp.48334~ (2019)
  55. Hine, P. J., "Hot Compaction of Woven Nylon 6, 6 Multifilaments", Journal of Applied Polymer Science, 101(2), pp.991~997 (2006)
  56. Bhattacharyya, D., "Polyamide 6Single Polymer Composites", eXPRESS Polymer Letters, 3(8), pp.525~532 (2009)
  57. Gong, Y., "Single Polymer Composites by Partially Melting Recycled Polyamide 6 Fibers : Preparation and Characterization", Journal of Applied Polymer Science, 118(6), pp.3357~3363 (2010)
  58. Gong, Y., "Polyamide Single Polymer Composites Prepared via In Situ Anionic Polymerization of εCaprolactam", Composites Part A : Applied Science and Manufacturing, 41(8), pp.1006~1011 (2010)
  59. Vecchione, P., "HotCompacted Self Reinforced Polyamide 6 Composite Laminates", Composites Part B : Engineering, 110, pp.39~45 (2017)
  60. Gilbert, J. L., "Self-Reinforced Composite Poly(methyl methacrylate) : Static and Fatigue Properties", Biomaterials, 16(14), pp.1043~1055 (1995)
  61. Wright, D. D., "Bending and Fracture Toughness of Woven Self-Reinforced Composite Poly(methyl methacrylate)", Journal of Biomedical Materials Research, 36(4), pp.441~453 (1998)
  62. Wright, D. D., "Interfacial Properties of Self-Reinforced Composite Poly(methyl methacrylate)", Journal of Biomedical Materials Research, 43(2), pp.153~161 (2002)
  63. Kim, D. W., "Development of a Continuous Manufacturing Process for Self-Reinforced Composites Using Multi-Step Highly Drawn Polypropylene Tapes", Polymer, 191, pp.122267~ (2020)
  64. Lee, H., "Processing Temperature Window Design via Controlling Matrix Composition for Polypropylene-Based Self-Reinforced Composites", Composites Part A : Applied Science and Manufacturing, 143, pp.106301~ (2021)
  65. Shubhra, Q. T., "Mechanical Properties of Polypropylene Composites : A Review", Journal of Thermoplastic Composite Materials, 26(3), pp.362~391 (2011)
  66. Maddah, H. A., "Polypropylene as a Promising Plastic : A Review", American Journal of Polymer Science, 6(1), pp.1~11 (2016)
  67. Deng, M., "Properties of Self-Reinforced Ultra-High-Molecular-Weight Polyethylene Composites", Biomaterials, 18(9), pp.645~655 (1997)
  68. Guan, S., "Morphology and Properties of Self-Reinforced High Density Polyethylene in Oscillating Stress Field", Polymer, 38(20), pp.5251~5253 (1997)
  69. Zhang, G., "Self-Reinforcement of High-Density Polyethylene", Low-Density Polyethylene Prepared by Oscillating Packing Injection Molding Under Low Pressure, 1999, pp.71(5), 799~804
  70. Huang, H. -X., "Continuous Extrusion of Self-Reinforced High Density Polyethylene", Polymer Engineering & Science, 38(11), pp.1805~1811 (2004)
  71. Lei, J., "Biaxially Self-Reinforced HighDensity Polyethylene Prepared by Dynamic Packing Injection Molding. I. Processing parameters and mechanical properties", Journal of Applied Polymer Science, 93(4), pp.1584~1590 (2004)
  72. Huang, Y, -F., "Mechanical Properties and Biocompatibility of Melt Processed, Self-Reinforced Ultrahigh Molecular Weight Polyethylene", Biomaterials, 35(25), pp.6687~6697 (2014)
  73. Gil-Castell, O., "Polylactide-Based SelfReinforced Composites Biodegradation : Individual and Combined Influence of Temperature, Water and Compost", Polymer Degradation and Stability, 158, pp.40~51 (2018)
  74. Saeidlou, S., "Poly(lactic acid)Crystallization", Progress in Polymer Science, 37(12), pp.1657~1677 (2012)
  75. Kaban, A. P. S., "Kinetics of Catalytic Pyrolysis of Polyethylene Terephthalate (PET) Plastic Polymer with Zeolite", AIP Conference Proceedings, 2262, pp.050007~ (2020)
  76. Mouritz, A. P., "A Review of the Effect of Stitching on the In-Plane Mechanical Properties of Fibre-Reinforced Polymer Composites", Composites Part A : Applied Science and Manufacturing, 28(12), pp.979~991 (1997)
  77. Smith, P., "Ultra-High-Strength Polyethylene Filaments by Solution Spinning", Drawing, 1980, pp.15, 505~514
  78. Zafar, M. S., "Prosthodontic Applications of Polymethyl Methacrylate(PMMA) : An Update", Polymers, 12(10), pp.2299~ (2020)
  79. Maddah, H. A., "Polypropylene as a Promising Plastic : A Review", American Journal of Polymer Science, 6, pp.1~11 (2016)

관련 논문AI추천

차세대 자동차용 친환경 복합재료의 동향 및 전망서종환, 오은영, Marcela María Godoy Zúniga한국복합재료학회 · Composites Research2024 · 제37권 제2호탄소섬유 직물 및 전도성 탄소 필러가 고충진 된 열가소성 탄소섬유강화플라스틱의 전도 특성김성륜, 노예지, 장지운, 최성규한국복합재료학회 · Composites Research2021 · 제34권 제5호자동차 부품 적용을 위한 Segregated structure를 갖는 전자파 차폐용 고분자 복합소재 연구동향서종환, 이진우한국복합재료학회 · Composites Research2022 · 제35권 제4호sr-PET 복합재료의 공정 조건 최적화 및 내충격 특성 분석김강민, 김세윤, 김윤해, 이교문한국복합재료학회 · Composites Research2025 · 제38권 제1호탄소섬유를 이용한 열가소성 복합재료 시트 제조 및 특성김성수, 김완진, 송승아, 이윤선, 정용식한국복합재료학회 · Composites Research2015 · 제28권 제4호속경화용 탄소섬유/에폭시 프리프레그의 다단 압축 성형기술곽성훈, 권순덕, 김병하, 김태용, 문지훈, 홍상휘한국복합재료학회 · Composites Research2021 · 제34권 제5호

이 간행물의 다른 논문 (8건)

경계면 손상을 고려한 적층복합재료에 대한 멀티스케일 피로 손상 모델하동원, 주영식, 김정환, 김태리, 윤군진pp. 16-24구간 조합 복합재료 판의 충격 특성에 미치는 겹침부 설계에 관한 연구황희윤, Monem Moktadir, Asif Istiakpp. 25-3130kW 풍력터빈용 아마섬유 복합재 블레이드 제조를 위한 구조 시험 분석 연구신혜진, 이지현, 이정환, 문성영pp. 32-36부식 환경 하에서의 섬유강화복합재료의 마찰 및 마모 특성 연구박동현, 박수정, 박충용, 김윤해pp. 37-41Fatigue Life Prediction of Laminated Composite Materials by Multiple S-N Curves and Lamina-Level Failure Criteria유한길, 주영식, 윤군진, 하동원pp. 42-47
원문 보기