BNNT와 CNT의 강화효과에 대한 복합재 계면물성 관점의 고찰
An Essay of the Reinforcing Effect of BNNT and CNT: A Perspective on Interfacial Properties
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
질화붕소나노튜브와 탄소나노튜브는 가장 대표적인 1차원 나노구조체로, 기존의 금속 및 세라믹재료에 비해 매우 뛰어난 물성을 가지고 있음이 알려지면서 다기능성 경량복합재의 강화재로 가장 큰 주목을 받아왔다. 각각 저 차원 무기나노소재와 유기나노소재를 대표하는 이들 나노구조는 우열을 가리기 어려울 정도로 뛰어난 기계적강성과 강도 그리고 열전도 특성을 가지고 있다. 따라서 구조용 복합소재 및 방열복합재 분야에서 이 두 나노튜브의 강화효과는 고분자기지와 혼합되면서 형성되는 재료 간 계면 물성이 어떠한가에 의해 크게 영향을 받게 된다. 본 논문에서는 질화붕소나노튜브와 탄소나노튜브가 복합재 내 기지와 형성하는 계면 물성에 대한 비교연구 사례를 통해 두 나노튜브의 강화효과에 대해 고찰한다. 기계적특성을 좌우할 수 있는 계면에서의 하중전달 특성을 튜브의 인발거동과 분자모델링을 통한 상호작용 에너지를 통해 분석한 결과와 더불어, 나노튜브에 결함이 존재하는 경우 두 나노튜브가 보이게 되는 상반되는 계면특성변화에 대해 점탄성 거동을 예시로 하여 소개한다.
Abstract
Boron nitride nanotubes and carbon nanotubes are the most representative one-dimensional nanostructures, and have received greate attention as reinforcement for multifunctional composites for their excellent physical properties. The two nanotubes have similar excellent mechanical stiffness, strength, and heat conduction properties. Therefore, the reinforcing effect of these two nanotubes is greatly influenced by the properties of their interface with the polymer matrix. In this paper, recent comparative studies on the reinforcing effect of boron nitride nanotubes and carbon nanotubes through experimental pull-out test and in-silico simulation are summarized. In addition, the conflicting aspect of the two different nanotubes with structural defects in their side wall is discussed on the viscoelastic damping performance of nanocomposites.
참고문헌 (23)
- S. Iijima, "Helical Microtubules of Graphitic Carbon", Nature, 354, pp.56~58 (1991)
- A. Rubio, "Theory of Graphitic Boron Nitride Nanotubes", Physical Review B, 49(7), pp.5081~ (1994)
- N. G. Chopra, "Boron Nitride Nanotubes", Science, 269(5226), pp.966~967 (1995)
- T. Hamilton, "Battle of the Nanotubes" (2015), The chemical Institute of Canada
- N. G. Chopra, "Mesurement of the Elastic Modulus of a Multi-wall Boron Nitride Nanotube", Solid State Communications, 105(5), pp.297~300 (1998)
- E. Hernandez, "Elastic Properties of C and BxCyNz Composite Nanotubes", Physical Review Letters, 80(20), pp.4502~4505 (1998)
- D. A. Stewart, "First-principles Calculation of the Isotope Effect on Boron Nitride Nanotube Thermal Conductivity", Nano Letters, 9(1), pp.81~84 (2009)
- S. Berber, "Unusually High Thermal Conductivity of Carbon Nanotubes", Physical Review Letters, 84(20), pp.4613~4616 (2000)
- K. Yang, "Influence of Chemical Processing on the Morphology, Crystalline Content and Thermal Stability of Multi-walled Carbon Nanotubes", Materials Chemistry and Physics, 112(2), pp.387~392 (2008)
- D. Golberg, "Synthesis and Characterization of Ropes Made of BN Multiwalled Nanotubes", Scripta Materialia, 44(8-9), pp.1561~1565 (2001)
- A. Lekawa-Raus, "Piezoresistive Effect in Carbon Nanotube Fibers", ACS Nano, 8(11), pp.11214~11224 (2014)
- J. W. Mintmire, "Are Fullerene Tubules Metallic?", Physical Review Letters, 68(5), pp.631~ (1992)
- S. M. Nakhmanson, "Spontaneous Polarization and Piezo-electricity in Boron Nitride Nanotubes", Physical Review B, 67(23), pp.235406~ (2003)
- X. Blase, "Stability and Band Gap Constancy of Boron Nitride Nanotubes", Europhysics Letters, 28(5), pp.335~ (1994)
- S. Yang, "Multiscale Modeling of Size-dependent Elastic Properties of Carbon Nanotube", polymer Nanocomposites with Interfacial Imperfections, 2012, pp.53(2), 623~633
- S. Choi, "Molecular Dynamics and Micromechanics Study on Mechanical Behavior and Interfacial Properties of BNNT", polymer Nanocomposites, 2017, pp.30(4), 247~253
- X. Chen, "Mechanical Strength of Boron Nitride Nanotube-polymer Interfaces", Applied Physics Letters, 107, pp.253105~ (2015)
- C. Yi, "Direct Nanomechanical Measurements of Boron Nitride Nanotube-ceramic Interfaces", Nanotechnology, 30, pp.025706~ (2019)
- Y. Jiang, "Exceptionally Strong Boron Nitride Nanotube Aluminum Composite Interfaces", Extreme Mechanics Letters, 59, pp.101952~ (2023)
- S. Yang, "A Thermomechanical Comparative Study on Carbon and Boron Nitride Nanotube Reinforced Polymer Composites", Mechanics of Advanced Materials and Structures, 29, pp.3556~3569 (2022)
- S. Yang, "Intrinsic Defect-induced Tailoring of Interfacial Shear Strength in CNT", polymer Nanocomposites, 2015, pp.127, 108~119
- Z. Li, "Mechanical Properties of Boron Nitride Nanotube Reinforced PEEK Composite : A Molecular Dynamics Study", Nanocomposites, 9(1), pp.148~158 (2023)
- T. Lee, "BNNT vs CNT : Influence of Structural Defects on Damping Characteristics of Nanocomposites", Dalton Transactions, 53, pp.2922~2928 (2024)