개질 폴리에틸렌 코팅 강관의 부착 및 체결부 성능 평가 연구
Experimental Study on the Adhesion and Performance Evaluation of Joints for Modified Polyethylene Coated Steel Pipes
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
본 연구에서는 강관의 효율적 유지관리를 위한 모니터링 시스템 개발 연구의 일환으로 개질 폴리에틸렌코팅 처리된 강관의 성능 평가를 위한 실험적 연구를 수행하였다. 기존 방식인 기계적 전처리 코팅의 경우 확관시 폴리에틸렌 부착이 저하되는 현상이 발생하여 이를 해결하고자 칼슘 혼입 인산 아연 피막을 활용한 화학적 전처리 공정이 적용되었다. SEM 및 EDX 분석결과, Zn/Ca 비 1.0에서 가장 치밀한 구조가 확인되었다. 또한, 확관 시의 코팅 이탈 방지를 위한 그라프트 처리 무수말레산을 기반으로 엘라스토머, 금속산화물, 블로킹방지제, 슬립제를 각기 다른 조합으로 혼입하여 개질된 폴리에틸렌 코팅 강관에 대한 부착 및 연신율 평가를 실시하였다. 그 결과, 모든 개질 재료를 혼입한 시험체(S4)에서 금속산화물만 혼입한 시험체(S2)대비 25% 이상 향상된 성능을 확인하였다. 마지막으로, 공정이 완료된 코팅 파이프에 대하여 표면부 코팅 손상 방지를 위한 파이프 고정 부속 일부인 쐐기형 소켓링과 이탈 방지 압륜을 개발하고 성능평가를 수행하였다.
Abstract
In this study, as part of the development of a monitoring system for the efficient maintenance of steel pipes, an experimental study was conducted to evaluate the performance of steel pipes treated with modified polyethylene coating. In the case of the conventional mechanical pre-coating method, there was a deterioration in polyethylene adhesion during expansion testing, which led to the application of a chemical pre-treatment process using a calcium-mixed phosphate zinc film to resolve this issue. SEM and EDX analyses showed that the densest structure was observed at a Zn/Ca ratio of 1.0, and improved heat resistance compared to the conventional method was confirmed. Additionally, to prevent coating detachment during expansion, an evaluation of adhesion and elongation was conducted on steel pipes with modified polyethylene coating, incorporating materials such as elastomers based on maleic anhydride grafting, metal oxides, blocking agents, and slip agents. Experimental results showed that the specimen (S4) containing all modified materials exhibited more than a 25% performance improvement compared to the specimen (S2) containing only metal oxides. Lastly, the development and performance evaluation of wedge-shaped socketing and pressing wheels, which are part of the pipe fixing accessories, were conducted to prevent surface coating damage on the completed pipes.
참고문헌 (19)
- Erban, L. E., "Beyond Old Pipes and Ailing Budgets : Systems Thinking on Twenty-first Century Water Infrastructure in Chicago", Frontiers in Built Environment, 5, pp.124~ (2019)
- Kleiner, Y., "Impact of Soil Properties on Pipe Corrosion : Re-examination of Traditional Conventions", Water Distribution Systems Analysis, 2010, pp.968~982 (2010)
- Kumar, M. S., "Failure Analysis of a Stainless Steel Pipeline", Engineering Failure Analysis, 15(5), pp.497~504 (2008)
- Zhen, L., "Analysis and Remedial Treatment of a Steel Pipe-jacking Accident in Complex Underground Environment", Engineering Structures, 59, pp.210~219 (2014)
- Fraga-Lamas, P., "Smart Pipe System for a Shipyard 4. 0", Sensors, 16(12), pp.2186~ (2016)
- Kuntze, H. -B., "Experiences with the Development of a Robot for Smart Multisensoric Pipe Inspection", Proceedings 1998 IEEE International Conference on Robotics and Automation, 2 (1998), IEEE
- Hong, P. D., "Design of a Real-time Monitoring Agent for a Digital Twin-based Smart Pipe Integrated Management System", Proceedings of the Korea Information and Communication Society General Conference, 25(2), pp.292~294 (2021)
- Liu, Z., "State of the Art Review of Inspection Technologies for Condition Assessment of Water Pipes", Measurement, 46(1), pp.1~15 (2013)
- Carminati, M., "Smart Pipe : A Miniaturized Sensor Platform for Real-time Monitoring of Drinking Water Quality", 2017 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS) (2017), IEEE
- Romano, M., "Protecting and Maintaining Transmission Pipeline" (2012), J. Prot. Coat. Linings e-book
- Kim, S., "Interfacial Bond Properties of Underwater Concrete Coated with Bisphenol A Epoxy Resins", Polymers, 15(21), pp.4290~ (2023)
- Kim, S., "Effect of Exposure Conditions on the Interfacial Bond Properties of SS400 plate Coated with Various Epoxy Resins", Coatings, 10(12), pp.1159~ (2020)
- Kim, S., "Early-Age Tensile Bond Characteristics of Epoxy Coatings for Underwater Applications", Coatings, 9(11), pp.757~ (2019)
- Won, B., "Effects of Water Exposure on the Interfacial Bond between an Epoxy Resin Coating and a Concrete Substrate", Materials, 12(22), pp.3715~ (2019)
- Samsudin, M. S. F., "Adhesives Performance of 3-layer PE Pipe Coatings : Effects of MAH Loading, PE Particles Size, Coating Interval Time and Service Temperature", Progress in Organic Coatings, 99, pp.157~165 (2016)
- Samay, G., "Grafting Maleic Anhydride and Comonomers onto Polyethylene", Journal of Applied Polymer Science, 56(11), pp.1423~1433 (1995)
- De Vito, G., "Functionalization of an Amorphous Ethylene-propylene Copolymer by Free Radical Initiated Grafting of Unsaturated Molecules", Journal of Polymer Science : Polymer Chemistry Edition, 22(6), pp.1335~1347 (1984)
- Zhang, X. M., "Oriented Structure and Anisotropy Properties of Polymer Blown Films : HDPE, LLDPE and LDPE", Polymer, 45(1), pp.217~229 (2004)
- Li, S., "Leak Detection of Water Distribution Pipeline Subject to Failure of Socket Joint Based on Acoustic Emission and Pattern Recognition", Measurement, 115, pp.39~44 (2018)