구조보강용 FRP 함침·접착수지의 역학적 특성 분석을 위한 시험방법 비교 연구
Comparative Study on Test Methods for Mechanical Properties of Structural Adhesives Used in FRP Strengthening
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Pull-off test is generally used to evaluate bond strength of FRP composite with concrete at job site. However, some damages on FRP composites can not be avoided during pull-off test and moreover test range of pull-off strength is limited by maximum tensile strength of concrete. Accordingly, it is required to set-up a test method that can evaluate mechanical properties of structural adhesive indirectly prior to pull-off test. In this study, the standard test methods for structural adhesive which can simply evaluate mechanical performance of adhesive were suggested through comparative experiments from each different standard in various countries. Particularly, gluing thickness of adhesive in tensile lap-shear tests, the section dimension of compression and bending test specimens become unified, and standard test specimen size is achieved by test results.
Abstract
Pull-off test is generally used to evaluate bond strength of FRP composite with concrete at job site. However, some damages on FRP composites can not be avoided during pull-off test and moreover test range of pull-off strength is limited by maximum tensile strength of concrete. Accordingly, it is required to set-up a test method that can evaluate mechanical properties of structural adhesive indirectly prior to pull-off test. In this study, the standard test methods for structural adhesive which can simply evaluate mechanical performance of adhesive were suggested through comparative experiments from each different standard in various countries. Particularly, gluing thickness of adhesive in tensile lap-shear tests, the section dimension of compression and bending test specimens become unified, and standard test specimen size is achieved by test results.
참고문헌 (20)
- 유영찬, "시설물 보강공법 성능인증을 위한 실험항 목․방법 및 평가기준 설정 연구" (2006), 한국건설기술연구원
- 유영찬, "구조보강용 FRP 함침·접착수 지의 압축·휨 특성치 시험방법 비교 연구", 한국콘크리 트학회학술발표대회논문집, 25(1), pp.349~353 (2006)
- "KS M 3015, 열경화성 플라스틱 일반 실험 방법", ~
- "KS M 3382, 유리섬유 강화 플라스틱의 휨실험 방법", ~
- "KS M 3383, 유리섬유강화 플라스틱의 압축실험 방법.", ~
- "KS M 3734, 접착제의 인장전단 접착강도 실험방법", ~
- 유영찬, "철근콘크리트 건축물 보강공법의 개발 및 성능평가" (2003), 한국건설기술연구원
- "JIS K 6850, 接着劑―剛性被着材の引張せん斷接着强さ試驗方法", JIS K 6850, ~ (1999)
- "JIS K 7171, プラスチック―曲げ特性の試驗方法, 1994.", ~
- "JIS K 7181. プラスチック-壓縮特性の試驗方法", ~
- "連續纖維しシートを用いたコンクリート構造物の補修補强指針", 日本土木學會, ~ (2001)
- "ISO 4587, Adhesives-Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies", ~ (2003)
- "ASTM D 1002, Standard Test Method for Apparent Shear Strength of Single-Lap Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)", ~ (2001)
- "ASTM D 695, Standard test method for compressive properties of rigid plastics", ~
- "EN 2561, Products and systems for the protection and repair of concrete structures-Test methods-", ~
- "ISO 604, Plastics-Determination of compressive properties", ~
- "ISO 178, Plastics－Determination of flexural properties", ~
- "ISO 1209-2. Rigid cellular plastics－Determination of flexural properties－Part 2: Determination of flexural strength and apparent flexural modulus of elasticity", ~ (2004)
- "ASTM D 790, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials", ~ (2003)
- "ACI440.2R-02, Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures", ACI Committee 440., ~