비선형 유한요소해석 프로그램을 이용한 철근콘크리트 기둥부재의 합리적인 극한강도 평가 방안
Realistic Estimate Method of Reinforced Concrete Column's Ultimate Strength Using the Nonlinear Finite Element Analysis Program
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The design method of the reinforced concrete structures is converting from the current limit state design method to the reliability based design method and active studies have been done in the US, Europe, and Japan etc. Performance based design method is considering lots of uncertainty of current design provision rationally and make sure that structure have a reliable reliability and safety. The main area of these studies is to secure the non-linear analysis technology with high reliability. The data for reinforced concrete columns tested by many researchers are used to verify the applicability of the nonlinear finite element analysis program (RCAHEST, Reinforced Concrete Analysis in Higher Evaluation System Technology). A comparison is made between analysis and test, calculated safety factor based on reliability theories to applies to analysis result.
Abstract
The design method of the reinforced concrete structures is converting from the current limit state design method to the reliability based design method and active studies have been done in the US, Europe, and Japan etc. Performance based design method is considering lots of uncertainty of current design provision rationally and make sure that structure have a reliable reliability and safety. The main area of these studies is to secure the non-linear analysis technology with high reliability. The data for reinforced concrete columns tested by many researchers are used to verify the applicability of the nonlinear finite element analysis program (RCAHEST, Reinforced Concrete Analysis in Higher Evaluation System Technology). A comparison is made between analysis and test, calculated safety factor based on reliability theories to applies to analysis result.
참고문헌 (13)
- 김기호, "성능기반 설계를 위한 철근콘크리트 구조용 비 선형 유한요소해석 프로그램의 신뢰성 평가", 석사, pp.2004
- 이재훈, "나선철근교각의 내진 성능실험", 대한토목학회논문집, 21(1), pp.109~121 (2001)
- 이재훈, "원형띠철근 교각의 내진성능에 관한 실험적 연구", 대한토목학회 논문집A, 22(1-A), pp.159~170 (2002), 대한토목학회
- 정영수, "원형 실물 철근콘크리트 교각의 철근 상세에 따른 내진성능 평가", 콘크리트공학회 가을 학술발표회 논문집, 13(2), pp.965~970 (2001)
- 천주현, "철근콘크리트 깊은 보의 내하력에 대한 신뢰도 평가", 콘크리트학회 논문집, 17(6), pp.955~962 (2005), 한국콘크리트학회
- Ang Beng Ghee, "Seismic Shear Strength of Circular Reinforced Concrete Column", ACI Structural Journal, 86(1), pp.45~59 (1989)
- Chien-Hung Lin, "High-Workability Concrete Columns Under Concentric Compression", ACI Structural Journal, 101(1), pp.85~93 (2004)
- Guney Ozcebe, "Confinement of Concrete Columns for Seismic Loading", ACI Structral Journal, 84(4), pp.308~315 (1987)
- James F.Pfister, "Influence of Ties on the Behavior of Reinforced Concrete Columns", Journal of ACI, 61(8), pp.521~537 (1964)
- J. B. Mander, "Theoretical stress-strain model for confined concrete", Journal of Structural Engineering, 114(8), pp.1804~1826 (1988)
- Okamura, H., "Verification of Modeling for Reinforced Concrete Finite Element,Finite Element Analysis of Reinforced Concrete structures", pp.528~543 (1985), ASCE
- Taylor, R. L., "FEAP - A Finite Element Analysis Program, Version 7.2 Users Manual", ~ (2000)
- Kim, T. H., "Seismic Damage Assessment of Reinforced Concrete Bridge Column", Engineering Structures, 27(4), pp.576~592 (2005)