본문 바로가기
KERD
논문KCI 등재

구조물 건전성 모니터링을 위한 스마트 센서 관련 최근 연구동향

A Recent Research Summary on Smart Sensors for Structural Health Monitoring

조수진|심성한|김은진
한국구조물진단유지관리공학회 (The Korea Institute For Structural Maintenance and Inspection)|2015.05|한국구조물진단유지관리공학회 논문집 (Journal of The Korea Institute for Structural Maintenance and Inspection)|제19권 제3호|pp. 10-21

1

조회

0

다운로드

15

인용

0

참고문헌

키워드

Smart sensor구조물 건전성 모니터링Structural health monitoring스마트 센서
주제분류안전공학

초록

구조물 건전성 모니터링은 센서로부터 구조물의 응답을 수집하고 분석하여 구조물의 정확한 상태를 진단하는 기술이다. 최근 노후화된구조물의 증가로 인하여, 지속가능한 사회 발전을 위해 더욱 발달된 구조물 건전성 모니터링 기술이 요구되고 있다. 최신 구조물 건전성모니터링 기술 중 하나인 무선 스마트 센서와 센서 네트워크 기술은 기존의 유선 방식의 모니터링 시스템과 비교하여 더욱 효율적이며 경제적인 모니터링 시스템의 구축을 가능하게 하는 기술이다. 최근까지도 관련 연구자들은 스마트 센서의 성능 및 확장성 향상을 위하여 연구개발을 진행하고, 다양한 실내, 실외 실험을 통한 성능 테스트를 진행하였다. 본 논문에서는 최근 (2010년 이후를 중심으로)에 개발된스마트 센서의 하드웨어, 소프트웨어, 그리고 응용 사례들을 정리함으로써, 구조물 건전성 모니터링을 위한 스마트 센서의 최신 연구동향에대해 소개하고자 한다.

Abstract

Structural health monitoring (SHM) is a technique to diagnose an accurate and reliable condition of civil infrastructure by collecting and analyzing responses from distributed sensors. In recent years, aging civil structures have been increasing and they require further developed SHM technology for development of sustainable society. Wireless smart sensor and network technology, which is one of the recently emerging SHM techniques, enables more effective and economic SHM system in comparison to the existing wired systems. Researchers continue on development of the capability and extension of wireless smart sensors, and implement performance validation in various in-laboratory and outdoor full-scale experiments. This paper presents a summary of recent (mostly after 2010) researches on smart sensors, focused on the newly developed hardware, software, and validation examples of the developed smart sensors.

참고문헌 (56)

  1. Bhalla, S., "High frequency piezoelectric signatures for diagnosis of seismic", blast induced structural damages, 2004, pp.37(1), 23~33
  2. Bilbao, A., "Ultra-low power wireless sensing for long-term structural health monitoring", Proceedings of SPIE Smart Structures and Materials+Nondestructive Evaluation and Health Monitoring, pp.798109-1~798109-14 (2011), International Society for Optics and Photonics
  3. Bocca, M., "Structural health monitoring in wireless sensor networks by the embedded Goertzel algorithm", Proceedings of the 2011 IEEE, 2011, 206~214[DOI]
  4. Buchli, B., "Wireless Sensor Networks", pp.179~195 (2012), Springer Berlin Heidelberg
  5. Casciati, S., "A multi‐channel wireless connection system for structural health monitoring applications", Structural Control and Health Monitoring, 18(5), pp.588~600 (2011)
  6. 조수진, "Structural health monitoring of a cable-stayed bridge using wireless smart sensor technology: data analyses", Smart Structures and Systems, An International Journal, 6(5), pp.461~480 (2010), 국제구조공학회
  7. Dorvasha, S., "Validation of a wireless sensor network using local damage detection algorithm for beam-column connections", Proceedings of SPIE, 7467, pp.764719-1~764719-11 (2010)
  8. Giurgiutiu, V., "Damage identification in aging aircraft structures with piezoelectric wafer active sensors", Journal of Intelligent Material Systems and Structures, 15(9-10), pp.673~687 (2004)
  9. Goertzel, G., "An algorithm for the evaluation of finite trigonometric series", American mathematical monthly, 65(1), pp.34~35 (1958)
  10. Ho, D. D., "Multiscale acceleration-dynamic strain-impedance sensor system for structural health monitoring", International Journal of Distributed Sensor Networks, 2012, pp.1~17 (2012)
  11. Shinae Jang, "Structural health monitoring of a cable-stayed bridge using smart sensor technology: deployment and evaluation", Smart Structures and Systems, An International Journal, 6(5), pp.439~459 (2010), 국제구조공학회
  12. 조홍기, "Develoment of high-sensitivity wireless strain sensor for structural health monitoring", Smart Structures and Systems, An International Journal, 11(5), pp.477~496 (2013), 국제구조공학회
  13. Kane, M., "Development of an extensible dual-core wireless sensing node for cyber-physical systems", Proceedings of SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, pp.90611U-1~90611U-19 (2014), International Society for Optics and Photonics
  14. Kim, D. Y., "Embedded software technology for wireless sensor network", The Magazine of the IEEK, 31(11), pp.84~98 (2004)
  15. Kim, J. H., "Modal analysis of the Yeondae Bridge using a reconfigurable wireless monitoring system", Proceedings of the 10th International Conference on Structural Safety and Reliability (ICOSSAR’09) (2009)
  16. Kim, J., "Experimental analysis of vehicle-bridge interaction using a wireless monitoring system and a two-stage system identification technique", Mechanical Systems and Signal Processing, 28, pp.3~19 (2012)
  17. Junhee Kim, "Rapid-to-deploy reconfigurable wireless structural monitoring systems using extended-range", Smart Structures and Systems, An International Journal, 6(5), pp.505~524 (2010), 국제구조공학회
  18. Kurata, M., "Long-term assessment of an autonomous wireless structural health monitoring system at the new Carquinez Suspension Bridge", Proceedings of SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, pp.798312~798312 (2011), International Society for Optics and Photonics
  19. Kurata, M., "Preliminary study of a wireless structural monitoring system for the new carquinez suspension bridge", Proceedings of the Fifth World Conference on Structural Control and Monitoring, pp.1~14 (2010)
  20. Labuz, E. L., "Local damage detection in beam-column connections using a dense sensor network", Proceedings of 19th Annual Structures Congress, pp.3143~3154 (2010)
  21. Law, K. H., "Wireless sensing and vibration control of civil structures", Proceedings of Wireless Information Technology and Systems (ICWITS) 2010, pp.1~4 (2010), Proceedings of Wireless Information Technology and Systems (ICWITS) 2010, IEEE International Conference
  22. Lee, H. M., "A wireless vibrating wire sensor node for continuous structural health monitoring", Smart Materials and Structures, 19(5), pp.055004~ (2010)
  23. Linderman, L. E., "Characterization of wireless smart sensor performance", Journal of engineering mechanics, 136(12), pp.1435~1443 (2010)
  24. Liu, L., "Damage localization using a power-efficient distributed on-board signal processing algorithm in a wireless sensor network", Smart Materials and Structures, 21(2), pp.025005~ (2012)
  25. Lynch, J. P., "An overview of wireless structural health monitoring for civil structures", Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 365(1851), pp.345~372 (2007)
  26. Lynch, J. P., "A summary review of wireless sensors and sensor networks for structural health monitoring", Shock and Vibration Digest, 38(2), pp.91~130 (2006)
  27. Jerome P. Lynch, "Design and performance validation of a wireless sensing unit for structural monitoring applications", Structural Engineering and Mechanics, An Int＇l Journal, 17(3-4), pp.393~408 (2004), 국제구조공학회
  28. Lynch, J. P., "Monitoring of a high speed naval vessel using a wireless hull monitoring system", Proceedings of the 7th International Workshop on Structural Health Monitoring, pp.9~11 (2009)
  29. Mascarenas, D. D., "Development of capacitance-based and impedance-based wireless sensors and sensor nodes for structural health monitoring applications", Journal of Sound and Vibration, 329(12), pp.2410~2420 (2010)
  30. 민지영, "Development of a low-cost multifunctional wireless impedance sensor node", Smart Structures and Systems, An International Journal, 6(6), pp.689~709 (2010), 국제구조공학회
  31. T. Nagayama, "Issues in structural health monitoring employing smart sensors", Smart Structures and Systems, An International Journal, 3(3), pp.299~320 (2007), 국제구조공학회
  32. T. Nagayama, "Middleware services for structural health monitoring using smart sensors", Smart Structures and Systems, An International Journal, 5(2), pp.119~137 (2009), 국제구조공학회
  33. Nguyen, K. D., "Long-term vibration monitoring of cable-stayed bridge using wireless sensor network", International Journal of Distributed Sensor Networks, 2013, pp.1~9 (2013)
  34. Y.Q. Ni, "In-construction vibration monitoring of a super-tall structure using a long-range wireless sensing system", Smart Structures and Systems, An International Journal, 7(2), pp.83~102 (2011), 국제구조공학회
  35. Shamim N. Pakzad, "Development and deployment of large scale wireless sensor network on a long-span bridge", Smart Structures and Systems, An International Journal, 6(5), pp.525~543 (2010), 국제구조공학회
  36. Park, G., "Overview of piezoelectric impedance-based health monitoring and path forward", Shock and Vibration Digest, 35(6), pp.451~464 (2003)
  37. Park, H. S., "An integrative structural health monitoring system for the local", global responses of a large-scale irregular building under construction, 2013, pp.13(7), 9085~9103
  38. Park, J. W., "Feasibility study of micro-wind turbines for powering wireless sensors on a cable-stayed bridge", Energies, 5(9), pp.3450~3464 (2012)
  39. Peckens, C. A., "Embedded linear classifiers on wireless sensor networks for damage detection", Proceedings of SPIE Smart Structures and Materials+Nondestructive Evaluation and Health Monitoring, pp.86920V-1~86920V-10 (2013), International Society for Optics and Photonics
  40. Quinn, W., "Design and performance analysis of an embedded wireless sensor for monitoring concrete curing and structural health", Journal of Civil Structural Health Monitoring, 1(1-2), pp.47~59 (2011)
  41. Rice, J. A., "Structural health monitoring sensor development for the Imote2 platform", Proceedings of In The 15th International Symposium on:Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, pp.693234~693234 (2008), International Society for Optics and Photonics
  42. Flexible smart sensor framework for autonomous full-scale structural health monitoring, "Rice, J. A.", University of Illinois at Urbana-Champaign, ~, pp.Newmark Structural Engineering Laboratory Report Series 018 (2009)
  43. Jennifer A. Rice, "Flexible smart sensor framework for autonomous structural health monitoring", Smart Structures and Systems, An International Journal, 6(5), pp.423~438 (2010), 국제구조공학회
  44. Ruiz-Sandoval, M., "Sensor development using Berkeley Mote platform", Journal of Earthquake Engineering, 10(2), pp.289~309 (2006)
  45. Shimada, T., "Estimating method of cable tension from natural frequency of high mode", Proceedings of JSCE, 501(1-29), pp.163~171 (1994)
  46. Sim, S. H., "A wireless smart sensor network for automated monitoring of cable tension", Smart Materials and Structures, 23(2), pp.025006~ (2014)
  47. Sim, S. H., "Automated decentralized modal analysis using smart sensors", Structural Control and Health Monitoring, 17(8), pp.872~894 (2010)
  48. Spencer, B. F., "Smart sensing technology : opportunities and challenges", Structural Control and Health Monitoring, 11(4), pp.349~368 (2004)
  49. Spencer, Jr. B. F., "Wireless smart sensor technology for monitoring civil infrastructure: technological developments and full-scale applications", Proceedings of 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM11+) (2011), Technopress
  50. Straser, E. G., "A modular, wireless damage monitoring system for structures" (1998), John A. Blume Earthquake Engineering Center
  51. Swartz, R. A., "A multirate recursive ARX algorithm for energy efficient wireless structural monitoring", Proceedings of 4th World Conference on Structural Control and Monitoring (2006)
  52. Swartz, R. A., "Design of a wireless sensor for scalable distributed in-network computation in a structural health monitoring system", Proceedings of 5th international workshop on structural health monitoring, pp.1570~1577 (2005)
  53. Marco Torbol, "Long term monitoring of a cable stayed bridge using DuraMote", Smart Structures and Systems, An International Journal, 11(5), pp.453~476 (2013), 국제구조공학회
  54. Wang, Z., "Sandwich node architecture for agile wireless sensor networks for real-time structural health monitoring applications", Proceedings of SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, pp.83450L-1~83450L-8 (2012), International Society for Optics and Photonics
  55. Dao Zhou, "Ultra low-power active wireless sensor for structural health monitoring", Smart Structures and Systems, An International Journal, 6(6), pp.675~687 (2010), 국제구조공학회
  56. Daniele Zonta, "Wireless sensor networks for permanent health monitoring of historic buildings", Smart Structures and Systems, An International Journal, 6(6), pp.595~618 (2010), 국제구조공학회

관련 논문AI추천

스마트 센서 기술을 이용한 구조물 건전도 모니터링 시스템 Part 1 : 스마트 센서의 개발과 성능평가김만구, 이우상, 허광희한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2007 · 제11권 제2호교량 건전성 모니터링을 위한 정보처리기법구기영, 박영수, 윤정방, 이종재, 이진학한국전산구조공학회 · 한국전산구조공학회논문집2008 · 제21권 제6호구조물 모니터링을 위한 무선 스마트 센서 네트워크의 칼만 필터 기반 데이터 복구김은진, 박종웅, 심성한한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2016 · 제20권 제3호항만구조물 건전성 모니터링을 위한 Imote2 플랫폼 기반 스마트 무선센서노드의 성능 평가김정태, 박재형, 이소영한국해안,해양공학회 · 한국해안·해양공학회논문집2011 · 제23권 제1호스마트 센서 시스템을 이용한 구조물의 모달 인자 추출박기태, 이우상, 전준용, 허광희한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2008 · 제12권 제4호Admittance를 기반으로 한 센서 자가 진단 알고리즘의 실험적 검증 – 상호비교를 통한 센서 결함 탐지박규해, 박통일, 정휘권, 조혜진한국복합재료학회 · Composites Research2015 · 제28권 제4호

이 간행물의 다른 논문 (16건)

요철형 이음단면을 갖는 프리캐스트 교량 바닥판의 휨성능 평가오현철, 신동호, 김영진, 박세진, 김인규pp. 1-9단열성능 향상 재료를 사용한 콘크리트의 내구성에 관한 연구김상헌, 김정호, 김세환, 전현규, 박영신pp. 22-29시멘트 콘크리트 포장의 스케일링 저항성 평가방법에 관한 실험적 연구오홍섭, 심종성, 심재원, 이현기pp. 30-38MgO를 혼합한 알칼리 활성화 슬래그의 강도와 건조수축 특성전유빈, 김태완pp. 39-47연속붕괴가 방지된 초고층 복합빌딩시스템의 예비설계조태준, 최기봉, 이진용, 김성수pp. 48-54
원문 보기