철근 보강된 ECC 기둥의 반복하중에 대한 이력거동
Cyclic Responses of Steel Reinforced ECC Column under Reversed Cyclic Loading Conditions
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
이 논문에서는 철근으로 보강한 고인성 섬유복합체(ECC) 기둥의 반복이력거동을 연구하였다. ECC를 제조하기 위하여 1종 보통 포틀랜드 시멘트(OPC)를 기본 결합재로 하고, 플라이애시를 다량 치환하여 결합재와 충전재로 사용하는 배합을 적용하였다. 철근 보강한 ECC기둥의 반복이력거동을 평가하기 위하여 일반 철근콘크리트 기둥 실험체를 제작하여 실험을 수행하였다. 반복하중에 의한 실험의 결과, 일반 철근콘크리트 기둥에 비하여 철근 보강한 ECC 기둥은 높은 연성비와 함께 안정적인 이력거동을 나타내었고, 우수한 휨 균열 제어 특성을 나타내었다. 또한 횡방향 하중에 대한 기둥의 내력 증진효과와 함께 에너지 소산능력의 향상을 나타내었다.
Abstract
In this study, experimental research was carried out to evaluate steel reinforced ECC (Engineered Cementitious Composites) column, which exhibits excellent crack control property and highly ductile behavior. Ordinary portland cement and high volume fly ash were used as binding materials in the mixture proportions for the purpose of achieving a high level of multiple cracking property with the tightly controlled crack width. To compare with the cyclic behavior of steel reinforced ECC column specimen, a conventional reinforced concrete column was prepared and tested under reversed cyclic loading condition. Based on the cyclic load test, ECC column exhibited higher cyclic behavior, compared to the conventional RC column, in terms of load carrying capacity and energy dissipation capacity.
참고문헌 (13)
- Cho, C. G., "Cyclic Responses of Reinforced Concrete Composite Columns Strengthened in the Plastic Hinge Region by HPFRC Mortar", Composite Structures, 94(7), pp.2246~2253 (2012)
- Fischer G, "Effect of matrix ductility on deformation behavior of steelreinforced ECC flexural members under reversed cyclic loading conditions", ACI Struct J, 99(6), pp.781~790 (2002)
- Fischer G, "Deformation behavior of fiberreinforced polymer reinforced Engineered Cementitious Composite(ECC)flexural members under reversed cyclic loading conditions", ACI Struct J, 100(1), pp.25~35 (2003)
- 김윤용, "고로슬래그미분말이 혼입된 ECC(Engineered Cementitious Composite)의 개발", 콘크리트학회 논문집, 18(1), pp.21~28 (2006), 한국콘크리트학회
- 김윤용, "마이크로역학에 의하여 설계된 ECC (Engineered Cementitious Composite)의 역학적 특성", 콘크리트학회 논문집, 17(5), pp.709~716 (2005), 한국콘크리트학회
- Kim, Y. Y., "Flexural Performance of Reinforced Concrete Beams Strengthened with Strain-Hardening Cementitious Composite and High Strength Reinforcing Steel Bar", Composites Part B: Engineering, 56, pp.512~519 (2014)
- 이방연, "Flexural performance and fiber distribution of an extruded DFRCC panel", Computers and Concrete, An International Journal, 10(2), pp.105~119 (2012), 국제구조공학회[DOI]
- Li, V. C., "A Micro mechanical Model of Tension-Softening and Bridging Toughening of Short Random Fiver Reinforced Brittle Matrix Composites", Journal of the Mechanics and Physics of Solids, 39(Issue, 5), pp.607~625 (1991)[DOI]
- Li, V. C., "Condition for Pseudo Strain-Hardening in Fiber Reinforced Brittle Matrix Composites", Journal of Applied Mechanics Review, 45(Issue 8), pp.390~398 (1992)
- Li, V. C., "Tensile Strainhardening Behavior of Polyvinyl Alcohol-engineered Cementitious Composite (PVA-ECC)", ACI Materials Journal, 98(6), pp.483~492 (2001)
- Marshall, D. B., "A J-Integral Method for Calculating Steady-State Matrix Cracking Stresses in Composite", Mechanics of Materials, 7(Issue 2), pp.127~133 (1988)
- Salahuddin Q., "Application of Engineered Cementitious Composites(ECC)in interior beam-column connections for enhanced seismic resistance", Engineering Structures, 69(15), pp.235~245 (2014)
- Shwan H. Said, "Flexural behavior of engineered cementitious composite (ECC) slabs with polyvinyl alcohol fibers", Construction and Building Materials, 75(30), pp.176~188 (2015)