섬유혼입률에 따른 고성능 슬러리 충전 강섬유보강 시멘트 복합체의 휨성능 특성
Flexural Performance Characteristics of High Performance Slurry Infiltrated Fiber Reinforced Cementitious Composite according to Fiber Volume Fraction
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
본 연구는 SIFCON 형태의 고성능 강섬유보강 시멘트 복합체의 섬유혼입률에 따른 휨실험을 수행하였고, 실험결과를 바탕으로 휨성능을 평가하였다. 슬러리를 충전하는 형태로 일반 섬유보강시멘트와 달리 높은 섬유혼입률을 확보할 수 있는 장점을 가지고 있다. 주요 실험변수는 섬유혼입률 8.0%, 7.5%, 7.0%, 6.5% 및 6.0% 이며, 각 변수에 대한 휨강도 및 휨인성 특성을 분석하였다. 그 결과, 높은 섬유혼입률로 인하여 초기균열 발생 이후에도 계속적으로 하중이 증가하였으며, 최대강도 이후 충분한 잔류강도를 확보하였다. 또한 최대 50MPa 수준의 높은 휨강도를 발현하였으며, 섬유혼입률에 따른 휨강도 및 휨인성은 비례하여 증가하는 경향으로 나타났다.
Abstract
High performance fiber reinforced cementitious composite (HPFRCC) can provide high fracture energy absorption as well as high strength with high fiber volume fraction. The increased fracture energy helps resisting high frequency loadings, such as earthquake, impact or blast. This study investigates the flexural performance of slurry infiltrated fiber concrete (SIFCON), one of the important HPFRCC, with respect to varying fiber volume fraction. The maximum fiber volume fraction was 8.0 % and reduced to 6.0% by 0.5% and the maximum volume fraction is obtained by packing fibers with simple tapping by hands. The used fiber was a steel fiber with the length 30 mm and the diameter of 0.5 mm. The flexural strengths were 48.7 MPa at 8.0 % and 22.8 MPa at 6.0 %. The measured flexural strength is much higher compared to other cememtitious composite materials but decreased proportional to the fractions. This result implies that for SIFCON considered herein the reduced amount of steel fibers may affect its flexural performance in a negatively way. The flexural toughness, an index to represent the fracture energy absorption, also decreased with the reduced fiber amount.
참고문헌 (10)
- "Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)", ASTM C 1609 , American Society for Testing and Materials, ~ (2007)
- Banthia, N., "Toughness Enhancement in the Steel Fiber Reinforced Concrete through Fibers Hybridization", Cement and Concrete Research, 37(9), pp.1366~1372 (2007)
- 구동오, "비정질 강섬유보강콘크리트의 휨성능 특성", 콘크리트학회 논문집, 26(4), pp.483~489 (2014), 한국콘크리트학회[DOI]
- 이현호, "강섬유 계수 및 혼입률을 고려한 SFRC의 강도 및 변형 특성", 콘크리트학회 논문집, 16(6), pp.759~766 (2004), 한국콘크리트학회
- Kim, Seung Won, "Evaluation on Filling Peformance of High Flow Slurry with respect to Quantity of Fine Aggregate", Proceeding of Korea Institute for Structural Maintenance and Inspection, 18(2), pp.407~409 (2014), KSMI
- Metha, P. K., "Concrete: Microstructure, Properties and Materials", pp.502~522 (2006), McGraw-Hill, Inc
- Naaman, A. E., "Toughness, Ductility, Surface Energy and Deflection-Hardening FRC Composites", Proceedings of the JCI International Workshop on Ductile Fiber-Reinforced Cementitious Composites (DRFCC)-Application and Evaluation (DFRCC-2002), pp.33~57 (2002), JCI
- Seung-Won Kim, "Optimum Mix Proportions of In-Fill Slurry for High Performance Steel Fiber Reinforced Cementitious Composite", Journal of the Korean Recycled Construction Resources Institute, 2(3), pp.196~201 (2014), KRCRI
- 강수태, "초고성능 섬유보강 콘크리트에 혼입된 강섬유의 부착강도 평가", 콘크리트학회 논문집, 25(5), pp.547~554 (2013), 한국콘크리트학회[DOI]
- 이영오, "팽창재 치환율에 따른 섬유보강 시멘트 복합체의 역학적 특성", 콘크리트학회 논문집, 22(5), pp.617~624 (2010), 한국콘크리트학회