Box-willson 실험계획법 기반 고강도 자기충전형 콘크리트의 최적설계방법
Box-Wilson Experimental Design-based Optimal Design Method of High Strength Self Compacting Concrete
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Box-Wilson 실험계획법은 보통 중심합성계획법으로 알려져 있으며, 변동성이 존재하는 정보를 실험 계획적 방법으로 수집하는 설계 기법이다. 이 방법은 최소의 설계비용으로 가능한 많은 정보를 얻는 목적으로 고안되었다. 본 연구에서는 60 MPa급 고강도 자기충전형 콘크리트(HSSCC)를 대상으로 다양한 성능에 대한 여러 배합인자들의 효과를 효율적으로 파악하고 최적배합을 찾는 과정에 이 방법을 적용하였다. HSSCC의 배합인자(요인)와 물리적 성능(반응) 사이의 비선형적 관계는 2차 다항식으로 반응표면을 근사화 모델링하였으며, 요인점=25=32개, 축점=2k=10개, 중심점은 각 축에서 2번 씩 10개, 총 52개의 실험점에서 물시멘트비, 단위시멘트량, 잔골재비, 단위플라이애쉬량, 단위고성능감수량의 총 5개의 인자에 따른 압축강도, 통과능력, 재료분리저항성, 제조비용, 밀도 등의 총 5개의 반응을 파악하기 위한 실험이실시되었다. 연구의 결과 Box-Wilson 실험계획법은 배합인자와 반응 사이의 관계를 과학적인 방법으로 계획하고 객관적으로 해석하는 데 매우 효과적이었으며, 수치해석적인 방법으로 최적배합을 계산할 수 있었다.
Abstract
Box-Wilson experimental design method, known as central composite design, is the design of any information-gathering exercises where variation is present. This method was devised to gather as much data as possible in spite of the low design cost. This method was employed to model the effect of mixing factors on several performances of 60 MPa high strength self compacting concrete and to numerically calculate the optimal mix proportion. The nonlinear relations between factors and responses of HSSCC were approximated in the form of second order polynomial equation. In order to characterize five performances like compressive strength, passing ability, segregation resistance, manufacturing cost and density depending on five factors like water-binder ratio, cement content, fine aggregate percentage, fly ash content and superplasticizer content, the experiments were made at the total 52 experimental points composed of 32 factorial points, 10 axial points and 10 center points. The study results showed that Box-Wilson experimental design was really effective in designing the experiments and analyzing the relation between factor and response.
참고문헌 (14)
- Atcin, P. -C., "High performance concrete", pp.203~211 (2011), CRC Press
- Baykasoğlu, A., "Prediction and multiobjective optimization of high-strength concrete parameters via soft computing approaches", Expert Systems with Applications, 36(3), pp.6145~6155 (2009)
- 도정윤, "단면수복용 고유동성 VA", VeoVa 개질 시멘트 모르타르의 부착특성에 대한 피착면 표면수의 영향, 2013, pp.17(5), 94~104[DOI]
- Duan, Z., "Prediction of compressive strength of recycled aggregate concrete using artificial neural networks", Construction and Building Materials, 40, pp.1200~1206 (2013)
- EFNARC., "Specification and Guidelines for Self Compacting Concrete", pp.23~25 (2002), DFNARC
- Fardis, M. N., "Innovative Materials and Techniques in Concrete Construction", pp.45~49 (2012), Springer
- Ghafari, E., "RSM-based model to predict the performance of self-compacting UHPC reinforced with hybrid steel micro-fibers", Construction and Building Materials, 66, pp.375~383 (2014)
- Khan, M. I., "Predicting properties of High Performance Concrete containing composite cementitious materials using Artificial Neural Networks", Automation in Construction, 22, pp.516~524 (2012)
- 고영곤, "고유동 고강도 콘크리트용 거푸집의 측압 특성에 관한 실험적 연구", 한국구조물진단유지관리공학회 논문집, 19(3), pp.130~138 (2015), 한국구조물진단유지관리공학회
- Montgomery, D. C., "Design and analysis of experiments", pp.478~544 (2013), John Wiley & Sons
- Myers, R. H., "Response surface methodology: process and product optimization using designed experiments", pp.446~449 (2009), John Wiley & Sons
- Ozbay, E., "Investigating mix proportions of high strength self compacting concrete by using Taguchi method", Construction and Building Materials, 23(2), pp.694~702 (2009)
- Siddique, R., "Prediction of compressive strength of self-compacting concrete containing bottom ash using artificial neural networks", Advances in Engineering Software, 42(10), pp.780~786 (2011)
- Yeh, I. -C., "Modeling of strength of high-performance concrete using artificial neural networks", Cement and Concrete research, 28(12), pp.1797~1808 (1998)