석회석 혼입량에 따른 콘크리트의 역학적 및 내구특성
Mechanical Properties and Durability of Concrete in Relation to the Amount of Limestone Use
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
전 세계 적으로 이산화탄소 배출 저감을 위한 노력으로 시멘트 산업에서는 비소성 결합재인 석회석을 시멘트에 첨가하여 콘크리트를 제조하고 있다. 특히, 유럽에서는 석회석을 시멘트의 35%까지 치환하여 사용하기도 한다. 국내에서는 2013년에 KS L 5201을 개정하여 석회석을 보통 포틀랜드 시멘트에 5%까지 혼합하여 사용할 수 있도록 하였으며, 아직 석회석 혼합 시멘트에 대한 규격은 전무한 상태이다. 본 연구에서는 비소성 결합재인 석회석을 활용하여, 석회석 혼입량에 따른 콘크리트의 역학적 특성 및 내구특성에 대한 영향을 살펴보았다
Abstract
In order to reduce carbon dioxide emission in construction industry, less amount of cement use can be one of the alternatives to manufactureconcrete. One of the non-sintered construction materials are limestone, which is the raw material to manufacture ordinary Portland cement(OPC). A large amount of limestone have already been used as binders such as blended cement in Europe and US. Even European countries were alreadyestablished the standard of blended cement, where the limestone can be used up to 35 percent. In this study, experimental researches were conductedto investigate the effects of limestone replacement on the mechanical properties and durability of concrete with 15%, 25% and 35% of limestonesubstitution to use limestone in blended cement. 15 percent use of limestone in blended cement developed equivalent or even higher compressivestrengths compared to Plain mixture. Porosity of limestone cement with 15 percent substitution was much lower than Plain mixture. Most durabilitytests such as concrete carbonation, freeze-thaw cycle and drying shrinkage strains were conducted to evaluate long-term performance, and the testresults indicated that 15 percent of limestone use did not significantly influence on the concrete durability compared with plain concrete.
참고문헌 (20)
- 방진욱, "석회석 혼합 시멘트로 제조된 콘크리트의 기초 물성", 한국구조물진단유지관리공학회 논문집, 19(2), pp.125~132 (2015), 한국구조물진단유지관리공학회
- 최우현, "석회석미분말을 첨가한 친환경 시멘트콘크리트의 내구 특성", 한국구조물진단유지관리공학회 논문집, 16(5), pp.59~67 (2012), 한국구조물진단유지관리공학회
- El-Didamony, H., "Addition of limestone in the low heat portland cement", Ceramics-Silikáty, 44(4), pp.146~150 (1999)
- Green technology in Cement Industry, "Ceramist, 14(2)", ~ (2011)
- Heikal, M., "Limestone-filled pozzolanic cement", Cem. Concr. Res, 30, pp.1827~1834 (2000)
- Hooton, R. D., "Portland-Limestone Cement: State of the Art Report and Gap Analysis for CSA A 3000", Cement Assoc. Canada, 3053, 3~5 (2007)
- K, D. W., "The effect of limestone powder additions on strength and microstructure of fly ash blended cements", 13th Int. Congr. Chem. Cem, pp.1~7 (2011)
- 김태상, "슬래그 미분말 혼합 콘크리트의 공극구조와 염화물 확산계수와의 관계에 대한 실험적 연구", 콘크리트학회 논문집, 21(5), pp.639~647 (2009), 한국콘크리트학회
- Lee, S. -H., "Technology development and the future of enhanced compatitiveness in Korean cement industry", pp.282~ (2011), Ceramist
- Lee, S. H., "Effect of Particle Size Distribution of Fly Ash-Cement System on the Fluidity of Cement Pastes", Cement Concrete Res, 33, pp.763~768 (2003)
- 이승헌, "소량 혼합재로서 석회석과 고로슬래그를 복합 사용한 보통 포틀랜드 시멘트의 수화특성", 콘크리트학회 논문집, 27(1), pp.3~9 (2015), 한국콘크리트학회[DOI]
- 이승헌, "보통 포틀랜드 시멘트 페이스트의 유동특성에 미치는 석회석 미분말의 영향", 한국세라믹학회지, 50(2), pp.149~156 (2013), 한국세라믹학회[DOI]
- 이승태, "석회석미분말을 혼입한 모르타르 및 콘크리트의 내해수성 연구", 한국구조물진단유지관리공학회 논문집, 15(1), pp.129~137 (2011), 한국구조물진단유지관리공학회
- Lothenbach, B., "Influence of Limestone on the Hydration of Portland Cements", Cement Concrete Res., 38, pp.848~860 (2008)
- Mehta, P. K., "Concrete: Microstructure, Properties and Materials" (2006), Mc Graw Hill
- Palm, S., "Cements with a high limestone content - Mechanical properties, durability and ecological characteristics of the concrete", Constr. Build. Mater, 30, pp.308~318 (2016)
- Sakai, E., "Fluidity of Cement paste with various types of inorganic powders", Proc. 10th Int’l Cong. Chem. Cement, 2, pp.2~8 (1997)
- Stark, J., "Modern Concrete Materials: Binders, Additions and Admixtures" (1999), Thomas Telford
- Tsivilis, S., "Properties and behavior of limestone cement concrete and mortar", Cem. Concr. Res, 30, pp.1679~1683 (2000)
- Zelic, J., "Durability of the hydrated limestone-silica fume Portland cement mortars under sulphate attack", Cem. Concr. Res., 29, pp.819~826 (1999)
