본문 바로가기
KERD
논문KCI 등재

지점부 부재의 부식손상에 따른 강거더 단부 지압강도 평가

Evaluation on Bearing Capacity of End Girder Member with Local Corrosion

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류안전공학

초록

강교량은 유지관리가 충분히 이루어지지 않거나 , 해안 과 같이 가설위치의 환경이 고온 다습한 경우 단면에 국부적인 부식손상이 발생할 수 있다. 특히 강거더 교량 의 지점부에서는 교대부와 강거더 단부의 공간이 협소하여 상대적으로 습도가 높고 신축이음부로부터의 강우 및 동결 방지제가 누수되어 침전물을 습윤상태로 유지하게 되므로, 복부판과 지점부 보강재에 집중적으로 부식이 발생되고 있으므로 이로 인한 구조성능 변화를 확인하여야 한다. 따라서 본 연구에서는 실제 발생할 수 있는 강거더 단부 복부판과 보강재의 국부부식손상을 모사한 강재 실험체를 제작하고 이에 대한 단부 지압강도 변화를 실험적으로 평가하였다. 실험결과, 국부적 부식손상은 강거더 단부의 지압강도에 영향을 주며, 특히 수직 보강재에 의한 영향이 크게 나타남을 확인하였다.

Abstract

Localized corrosions damages in their structural sections can be occurred affected by installed environment conditions with high temperature as near the coastline and humidity or their poor maintenance situation. In bearing supports of steel bridges, especially, lower web and vertical stiffener in end girder support can be easily corroded because of relatively higher humidity due to the narrow space in the end of girder and the wetted accumulated sediments affected by rain water or antifreezing admixture leaked from expansion joint. It can be related to change in their structural performance. In this study, thus, bearing strength test specimens were fabricated considering corrosion damage in the web and vertical stiffeners and the change in their bearing strengths were experimentally evaluated. From the test results, localized corrosion damage of structural members in the end girder affected the bearing strength of end girder support, especially, localized corrosion damage of the vertical stiffener relatively highly affected their bearing strengths.

참고문헌 (13)

  1. Ahn, J. H., "Residual Shear Strength of Steel Plate Girder due to Web Local Corrosion", Journal of Constructional Steel Research, 89, pp.198~212 (2013)
  2. Ahn, J. H., "Repair Method and Residual Bearing Strength Evaluation of a Locally Corroded Plate Girder at Support", Engineering Failure Analysis, 33, pp.398~418 (2013)
  3. Gil, H. B., "The Importance of Timely Inspection of Structure and a Case Study of Repair and Reinforcement for Steel Box Girder Bridge", Magazine of the Korean Society of Steel Construction, 27(2), pp.59~62 (2015), KSSC
  4. Nauman Khurram, "Experimental and Numerical Evaluation of Bearing Capacity of Steel Plate Girder Affected by End Panel Corrosion", International Journal of STEEL STRUCTURES, 14(3), pp.659~676 (2014), 한국강구조학회
  5. Khurram, N., "Analytical Demonstrations to Assess Residual Baring Capacities of Seel Pate Girder Ends with Stiffeners Damaged by Corrosion", Structure and Infrastructure Engineering, 10, pp.69~79 (2014)
  6. Kim, I. T., "Experimental Evaluation of Shear Buckling Behaviors and Strength of Locally Corroded Web", Journal of Constructional Steel Research, 83, pp.75~89 (2013)
  7. 경갑수, "강철도교 열화현상에 관한 보수", 보강 연구-강철도교의 플랜지 용접이음부의 거동 특성 및 피로균열 보수보강-, 2012, pp.24(6), 613~625[DOI]
  8. Lee, C. Y., "Case Study on Maintenance Coatings for Steel Arch Bridge Considering Corrosion Environment of Bridge Members", Magazine of the Korean Society of Steel Construction, 27(2), pp.29~33 (2015), KSSC
  9. Ministry of Land, Infrastructure and Transport, "Bridge Design Specification" (2010)
  10. Nagai. M., "Recent Topics on Steel Bridge Engineering in Japan-Design and Maintenance", Proceeding of the 10th Korea-China-Japan Symposium on Steel Structures, pp.65~76 (2009), Korea Society of Steel Construction
  11. Research on Local Corrosion of Highway Steel bridges, "Tamakoshi, T.", NILIM, ~, pp.Technical note of National Institute for land and Infrastructure management, 294 (2006)
  12. Tohidi, S., "Load-carrying Capacity of Locally Corroded Steel Plate Girder Ends using Artificial Neural Network", Thin-Walled Structures, 100, pp.48~61 (2015)
  13. Usukura, M., "Influence of Corrosion Area of the Girder Ends of Highway Bridges to its Load Carrying Capacity", Journal of Structural Engineering, 57(A), pp.724~734 (2011), JSCE

관련 논문AI추천

이 간행물의 다른 논문 (19건)