철근콘크리트 전단벽의 구조성능개선을 위한 보강방안에 관한 실험적 연구
Experimental Study on the Retrofit Method to Improve the Structural Capacity of Reinforced Concrete Shear Wall
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
Four RC shear wall specimens with a/d of 2.2 are designed. And a flexural retrofitting is performed for one specimen by both enlarging wall section and adding additional vertical reinforcements. Also the effectivity of jaketting wall sides is evaluated for the two methods using only steel plate or welded wire mesh with enlargement of section. Cyclic loads are applied to the retrofitted specimens according to the loading history proposed by ACI under constant axial force. Test result showed that the strength and ductility of specimen were improved where the section was enlarged after the installation of additional vertical reinforcements. Confining the ends of wall by U shape W.W.F. with enlargement of section showed most excellent structural capacity regarding to the strength and ductility. Retrofitting by using steel plate was much effective not only to protect the abrupt decrease of strength after yield but also to improve the deformation capacity.
Abstract
Four RC shear wall specimens with a/d of 2.2 are designed. And a flexural retrofitting is performed for one specimen by both enlarging wall section and adding additional vertical reinforcements. Also the effectivity of jaketting wall sides is evaluated for the two methods using only steel plate or welded wire mesh with enlargement of section. Cyclic loads are applied to the retrofitted specimens according to the loading history proposed by ACI under constant axial force. Test result showed that the strength and ductility of specimen were improved where the section was enlarged after the installation of additional vertical reinforcements. Confining the ends of wall by U shape W.W.F. with enlargement of section showed most excellent structural capacity regarding to the strength and ductility. Retrofitting by using steel plate was much effective not only to protect the abrupt decrease of strength after yield but also to improve the deformation capacity.
참고문헌 (9)
- 오창학, "지진피해가 심한 벽 체의 보수 후 구조성능 평가", 한국콘크리트학회 논문집, 11(2), pp.513~516 (1999)
- 이현호, "FRP 및 철근 보강을 사용한 손상된 벽체의 휨보강 성능 평가", 대한건축학회 논문집(구조계), 20(8), pp.51~58 (2004), 대한건축학회
- 신종학, "반복하중을 받는 철 근콘크리트 전단 벽체의 접합방식에 따른 구조성능평 가", 한국콘크리트학회 가을학술논문집, 9(21), pp.513~518 (1997)
- 김현민, "피해를 입은 전단벽 의 보강후 구조성능 평가", 한국콘크리트학회 학술발 표논문집, 18(1), pp.234~237 (2006)
- A. S. Elnashai, "Repair and Retrofitting of RC Walls using Selective Techniques", Journal of Earthquake Engineering, 2(4), pp.525~528 (1998)
- A. E. Fiorato, "Behavior of Earthquake Resistant Structural Walls Before and After Repair", Journal of ACI, 80(5), pp.403~413 (1983)
- Josh Lombard, "Seismic Strengthening and Repair of Reinforced Concrete Shear Walls", Proceedings of 12 WCEE, pp.2032~
- ACI Innovation Task Group 1 and Collaborators, "Acceptance Criteria for Moment Frames Based on Structural Testing" (1999), ACI, Farmington Hills
- "Cross Sectional X structural Analysis of Components", IMBSEN, ~, pp.XTRACT v2.6.0