본문 바로가기
KERD
논문KCI 등재

중간부 부착파괴된 CFRP 판 보강 RC 보의 휨강도 평가

Evaluation of Nominal Flexural Strength in RC Beams Strengthend with CFRP Plate and Failed by Intermediate Crack Debonding

김태완|박종인|박선규|홍성남
한국구조물진단유지관리공학회 (The Korea Institute For Structural Maintenance and Inspection)|2011.09|한국구조물진단유지관리공학회 논문집 (Journal of The Korea Institute for Structural Maintenance and Inspection)|제15권 제5호|pp. 101-112

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

CFRPFRP강도감소계수Strength reduction factor유효 변형률공칭강도Effective strainNominal strength
주제분류안전공학

초록

본 논문은 중간부 부착파괴된 CFRP 보강 RC 보의 휨강도 산정을 다루고 있다. CFRP 보강 RC 보의 중간부 부착파괴의 영향을 고려하기 위해 강도감소계수를 제안하였다. 제안된 계수는 CFRP의 유효응력(또는 유효변형률)과 극한응력(또는 극한변형률) 비로 정의 되는 유효변률 모델을 이용하여 실험데이터로부터 유도하였다. 휨강도 산정식은 강도감소계수를 변수로 하여 함수를 구성하였다. 제안된 강도감소계수의 유효성, 정확성 및 타당성을 입증하기 위해서 각국의 설계기준 및 연구자들에 의해 제안된 계수 값과 실험값을 본 연구결과와 비교 및 검증했다. 본 논문에서 제시하는 해석 결과는 제안된 강도감소계수가 중간부 부착파괴된 CFRP 보강 RC 보의 휨강도를 매우 효율적으로 평가할 수 있음을 나타낸다.

Abstract

This paper shows a study carried out on the estimation of nominal flexural strength for CFRP-plated RC beams failed by intermediate crack debonding. A strength reduction factor is proposed to consider the effect of the intermediate crack debonding for the determination of nominal flexural strength. The proposed factor is derived from experimental data and utilizes the ratio of effective stress(or strain) in the CFRP plate to its ultimate strength(or strain) which is called effective strain model. An analytical equation for the estimation of the nominal flexural strength is formulated as a function of strength reduction factor. The validity, accuracy and efficiency of the proposed factor are established by comparing the analytical results with the experimental data, and the major design codes, as well as a number of factors given by researchers. The analytical results presented in this paper indicate that the proposed factor can effectively estimate the flexural nominal strength of CFRP-plated reinforced concrete beams failed by intermediate crack debonding.

참고문헌 (32)

  1. 김진율, "CFRP로 보강된 철근콘크리트 보의 정적 및 피로 거동", 석사, pp.2007
  2. 박중열, "탄소섬유판으로 보강된 철근콘크리트 보의 보강방법에 따른 휨성능 개선", 대한토목학회 논문집A, 22(4-A), pp.895~903 (2002), 대한토목학회
  3. 양동석, "탄소섬유 계면부착을 고려한 보강 RC 휨부재의 거동 특성", 박사, pp.2005
  4. 양동석, "탄소섬유판으로 부착보강된 철근콘크리트 부재의 계면 부착거동", 대한토목학회 논문집A, 27(3A), pp.443~452 (2007), 대한토목학회
  5. 이용택, "CFS로 보강된 철근콘크리트 보의 휨내력향상효과에 관한 연구", 구조물진단학회지, 3(3), pp.203~212 (2008)
  6. ACI 440.2R-02, "Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures", American Concrete Institute, ~ (2002)
  7. Ahmed, O, "Improved model for plate end shear of CFRP strengthened RC beams", Cement & Concrete Composites, 23(1), pp.3~19 (2001)
  8. Aram, M. R, "Debonding failure modes of flexural FRP-strengthened RC beams", Composites Part B: Engineering, 39(5), pp.826~841 (2008)
  9. Colotti, V, "Structural model to predict the failure behavior of plated reinforced concrete beams", Journal of Composites for Construction, 8(2), pp.104~122 (2004)
  10. CSA S806–02, "Design and construction of building components with fibre reinforced polymers", CanadianStandards Association, ~ (2002)
  11. Gao, B, "Prediction of concrete cover separation failure for RC beams strengthened with CFRP strips", Engineering Structures, 27(2), pp.177~189 (2004)
  12. Garden, H. N, "An experimental study of the influence of plate end anchorage of carbonfibre composite plates used to strengthen reinforced. concrete beams", Composite Structures, 29, pp.175~188 (1998)
  13. Garden, H. N, "An experimental study of the anchorage length of carbon fibre composite plates used to strengthen reinforced concrete beams", Construction and Building Materials, 12, pp.203~219 (1998)
  14. Head,P.R, "Advanced composites in civil engineering – A critical overview at this high interest, low use stage of development", International Conference on Advanced Composite Materials in Bridges and Structures, pp.3~15 (1996)
  15. Heffernan, P. J, "quivalent capacity and efficiency of reinforced concrete beams strengthened with carbon fibre reinforced plastic sheets", Canadian Journal of Civil Engineering, 23(1), pp.21~29 (1996)
  16. Technical report on continuous fiber reinforced concrete, "JCI", Japan Concrete Institute, ~ (1998)
  17. Lu, X. Z, "Intermediate crack debonding in FRP-strengthened RC beams: FE analysis and strength model", Journal of Composites for Construction, 11(2), pp.161~174 (2007)
  18. Meier, U, "Retrofitting of structures through external bonding of CFRP sheets", roceedings of the Second International RILEM Symposium, pp.509~516 (1995)
  19. Oehlers, D. J, "Premature failure of externally plated reinforced concrete beams", Journal of Structural Engineering, 116(4), pp.978~995 (1990)
  20. Oehlers D. J, "Design of FRP and steel plated RC structures: retrofitting beams and slabs for strength" (2004), stiffness and ductility
  21. Pesic, N, "Concrete beams with externally bonded flexural FRP-reinforcement: analytical investigation of debonding failure", Composites Part B: Engineering, 34(4), pp.327~338 (2003)
  22. Quantrill, R. J, "Predictions of the maximum plate end stresses of FRP strengthened beam: Part II", Magazine of Concrete Research, 48(177), pp.343~351 (1996)
  23. Rahimi, H, "Concrete beams strengthened with externally bonded FRP plates", Journal of Composites for Construction, 5(1), pp.44~56 (2001)
  24. Ross, C. A, "Strengthening of reinforced concrete beams with externally bonded composite laminates", ACI Structural Journal, 96(2), pp.212~220 (1999)
  25. Saadatmanesh, H, "RC beams strengthened with FRP plates II: analysis and parametric study", Journal of Structural Engineering, 117(2), pp.3434~3455 (1991)
  26. Sebastian, W. M, "Significance of midspan debonding failure in FRP-plated concrete beams", Journal of Structural Engineering, 127(7), pp.792~798 (2001)
  27. Teng, J. G, "FRP-strengthened RC structures" (2002), ohn-Willy & Sons
  28. Teng, J. G, "Intermediate crack-induced debonding in RC beamsand slabs", Construction and Building Materials, 17, pp.447~462 (2003)
  29. Triantafillou, T, "Strengthening of RC beams with epoxy-bonded fibre-composite materials", Construction and Building Materials, 25, pp.201~211 (1992)
  30. Tumialan, G, "Concrete cover delamination in reinforced concrete beams strengthened with carbon fiber reinforced polymer sheets", Proceedings of the Fourth International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, pp.725~735
  31. Yao, J, "Plate end debonding in FRP-plated RC beams—I: Experiments", Engineering Structures, 29(10), pp.2457~2471 (2007)
  32. Yao, J, "Plate end debonding in FRP-plated RC beams—II: Strength model", Engineering Structures, 29(10), pp.2472~2486 (2007)

이 간행물의 다른 논문 (14건)

경량골재 콘크리트를 활용한 중공 PPC 거더의 구조거동 평가이경수, 김익상, 노병철, 차광일pp. 75-81대형 콘크리트 앵커시스템의 전단성능 및 거동특성에 관한 연구김강식, 이광수, 신성우pp. 82-91가속도 계측 자료를 이용한 콘크리트 교량의 처짐 산정윤영균, 유희중pp. 92-100기능 개선의 내재화를 통한 강상판 교면포장의 LCC 분석백재욱, 박대효pp. 113-123받침배치에 따른 연속 플레이트 거더 사교의 지진거동 변화문성권pp. 124-135
원문 보기