용융아연도금 철근콘크리트 보의 부착강도 특성
Characteristics of Bond Strength in Concrete Beams Reinforced with Galvanized Rebar
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
용융아연도금(galvanizing)은 콘크리트 구조물의 철근 부식 문제를 해결하기 위해 사용된다. 용융아연도금 철근 콘크리트 보의 부착강도 영향에 대한 자료는 거의 없는 실정이다. 따라서, 이 연구의 목적은 용융아연도금철근이 콘크리트 보의 부착강도에 미치는 영향을 파악하는 데있다. 용융아연도금철근을 사용한 부재와 일반철근을 사용한 부재의 구조실험을 통하여 겹침이음 거동과 부착강도 특성을 비교하였다. 실험변수로써 철근의 용융아연코팅 유무, 철근 직경과 겹침이음 길이를 고려하였다. 용융아연도금 철근콘크리트 보의 균열 및 파괴 특성을 파악하였다. 용융아연도금철근 콘크리트 보의 겹침이음부 휨 거동특성은 일반철근 콘크리트 보의 겹침이음부 휨거동과 유사한 것으로 나타난다. 또한, 용융아연도금철근의 사용은 일반철근을 사용할 때에 비해 콘크리트 보의 부착강도에 불리한 영향을 미치지는 않는 것으로 나타났다.
Abstract
Galvanizing is one of the method used to solve the problem of corrosion of reinforcement in concrete structures. There few research reported in the literature regarding the effect of galvanized coating on the behavior of lap splices in concrete beams. The objective of this study was to determine whether galvanized rebar adversely affects lap splice behavior and bond strength. Concrete beams reinforced with black or galvanized rebar were tested in flexure. The test variables included the presence of galvanized rebar steel diameter, and lengths of lap splices. The study concentrated on comparing crack, failure pattern, and bond strength. The ultimate behavior of beams reinforced with galvanized rebar was not significantly different from that of black steel reinforced beams. Therefore, the test results indicated that the use of galvanizing-coated rebar had no adverse effect on behavior in lap splices of rebar compared to the use of black rebar.
참고문헌 (17)
- Cairns, J., "Bond Strength of Black and Epoxy-Coated Reinforcement- A Theoretical Approach", ACI Materials Journal, 93(4), pp.362~369 (1996)
- Cheng, A., Huang, "Effect of Rebar Coating on Corrosion Resistance and Bond Strength of Reinforced Concrete", Construction and Building Materials, 19, pp.404~412 (2005)
- Choi, O. C., "Bond of Epoxy-Coated Reinforcement Bar Parameters", ACI Materials Journal, 88(2), pp.207~217 (1990)
- 최동욱, "RC 부재 휨 실험에 의한 GFRP 보강근의 이음길이 제안", 콘크리트학회 논문집, 21(1), pp.65~74 (2009), 한국콘크리트학회
- Cook, A. R., "Chloride Corrosion of Steel in Concrete", ASTM-STP 629, American Society for Testing Materials, 51~ (1977)
- Dong, S. G., "Corrosion Behavior of Epoxy", Zinc Duplex Coated Rebar Embedded in Concrete in Ocean Environment, 2012, pp.28, 72~78
- Hamad, B. S., "Bond Strength of Hot-Dip Galvanized Reinforcement in Normal Strength Concrete Structures", Construction and Building Materials, 19, pp.275~283 (2005)
- Hadje-Ghaffari, H., "Bond of Epoxy-Coated Reinforcement: Cover, Casting Position, Slump, and Consolidation", ACI Structural Journal, 91(1), pp.59~68 (1994)
- 홍건호, "철근 마디 형상에 따른 RC 휨부재의 부착강도 평가", 콘크리트학회 논문집, 23(3), pp.393~400 (2011), 한국콘크리트학회
- Idun, E. K., "Bond of Epoxy-Coated Reinforcement: Coefficient of Friction and Rib Face Angle", ACI Structural Journal, 96(4), pp.609~615 (1999)
- Jalili, M. M., "The Use of Inorganic Conversion Coatings to Enhance the Corrosion Resistance of Reinforcement and the Bond Strength at the Rebar", Concrete, 2012, pp.28, 72~78
- Kayali, O., "Bond of Ribbed Galvanized Reinforcing Steel in Concrete", Cement & Concrete Composites, 22, pp.459~467 (2000)
- Korea Concrete Institute, "Concrete Design Code", pp.145~146 (2012), Kimoondang Publishing Company
- Maahn, E., "Influence of Microstructure on the Corrosion Properties of Hot-Dip Galvanized Reinforcement in Concrete", Corrosion-NACE, 42(4), pp.187~196 (1986)
- Manna, M, "Effect of Plating Time for Electroless Nickel Coating on Rebar Surface: An Option for Application in Concrete Structure", Surface & Coating Technology, 202, pp.3227~3232 (2008)
- Selvaraj, R., "Studies on the Evaluation of the Performance of Organic Coatings Used for the Prevention of Corrosion of Steel Rebars in Concrete Structures", Progress in Organic Coatings, 64, pp.454~459 (2009)
- Wu, C., "Global Bond Behavior of Enamel-Coated Rebar in Concrete Beams with Spliced Reinforcement", Construction and Building Materials, 40, pp.793~801 (2013)