본문 바로가기
KERD
논문KCI 등재

실란계 프라이머를 활용한 바닥 마감재 부착성능 평가

Evaluation of Adhesive Performance of Surface Finishing Material with Primer Based on Silane

0

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류안전공학

초록

본 연구에서는 프라이머 도포 여·부 및 압축강도수준 그리고 바닥 마감재 시공재령에 따른 주차장용 바닥 마감재 부착성능을 평가하였다. 또한 현행 KS 기준에서는 바닥 마감재 부착성능을 모르타르 공시체를 활용하여 평가하도록 제안하고 있지만, 실제 현장에서 바닥 마감재는 콘크리트 상부면에 시공되기 때문에 바탕면 변화에 따른 부착성능을 추가변수로 계획하여 평가를 진행하였다. 모르타르는 현행기준에서 제안하고 있는 배합표에 준하여 제작하였으며, 콘크리트 설계기준강도는 18, 30, 50 MPa로 계획하였다. 프라이머는 모르타르 및 콘크리트 재령 28일 변수에 따라 바닥 마감재와 함께 도포되었으며, KS 기준에 준하여 바닥 마감재 재령 일에 따라 부착성능을 평가하였다. 변수에 따른 부착성능 평가결과 바닥 마감재 재령이 경과함에 따라 바닥 마감재 부착성능은 향상되는 것으로 나타났으며, 압축강도가 높아짐에 따라 바닥 마감재 부착성능 또한 향상되는 것으로 나타났다. 이는 파괴양상을 고려하였을 때 콘크리트 쪼갬 인장강도의 영향을 받은 것으로 판단된다. 프라이머 도포에 따른 부착성능은 유사한 것으로 나타났으며, 프라이머의 사용은 부착강도에 문제없이 콘크리트 표면의 내구성을 향상시킬 수 있을 것으로 판단된다. 또한 콘크리트 및 모르타르 바탕면의 부착강도 특성을 비교한 결과 바닥재의 부착강도는 구성재료 보다 압축강도에 큰 영향을 받는 것으로 나타났다. 따라서 현행 KS 기준의 모르타르 바탕면 실험체의 부착강도를 근거로 실제현장의 부착강도를 예측할 수 있을 것으로 판단된다.

Abstract

The experimental research was conducted to evaluate the adhesive performance of surface finishing material with primer based on silane(primer). For this purpose, concrete specimens with compressive strength of 18, 30, 50 MPa were made and cured in water condition (20±2°C) for 28 days. A primer was applied on the age of 28 days and evaluated according to based on the curing age of the surface finishing material. Moreover, the mortar specimen also made and tested as per KS F 4937 for compared with concrete-based test results. Test results indicated that the adhesive strength of specimens with primer exhibit similar than that of specimens without primer. Also, the adhesive performance improved with increasing in curing age and compressive strength. The correlation between compressive and adhesive strength of mortar and concrete specimens showed similar trend. It was noted that there is no significant effects of primer on adhesive performance of surface finishing material, thus use of primer has superior potential for solving durability problem of concrete slab surface.

참고문헌 (16)

  1. Choi, S. M., "An Experimental Study on the Surface Stability of Concrete Tile", Journal of the Architectural Institute of Korea, 24(2), pp.387~390 (2004)
  2. Eom, D. J., "An Experiment Study on the Standard Performance and Test of surface finishing for Parking Slab", Journal of the Architectural Institute of Korea, 25(1), pp.217~220 (2005)
  3. H, Geich., "Protecting Concrete with Cream – Practical Aspects", 3rd International Conference on Surface Technology with Water Repellent Agents, pp.287~298 (2001)
  4. Kim, B. G., "Synthetic Fiber to Control the Early Crack in Concrete and Application in Construction Field", Journal of the Korea Concrete Institute, 18(1), pp.36~43 (2006)
  5. Kim, H. J., "A Study on the Properties of Concrete Applied by the Surface Penetration Agents and Photocatalyst", Journal of The Korean Society of Civil Engineers, pp.1512~1515 (2008)
  6. Kim, M. J., "Crack Properties of Underground Parking Lot with Fiber Reinforced Concrete", Journal of the Korea Concrete Institute, pp.373~374 (2014)
  7. "KS F 2403 , Standard test method for making and curing concrete specimens", Korean Standards Association, ~ (2014)
  8. "KS F 2405, Standard test method for compressive strength of concrete", Korean Standards Association, ~ (2010)
  9. "KS F 2423, Method of test for splitting tensile strength of concrete", Korean Standards Association, ~ (2006)
  10. "KS F 4397, Surface finishing material for parking slab", Korean Agency for Technology and Standard, Korean Standards Association, ~ (2009)
  11. 권성준, "표면침투제를 이용한 콘크리트의 내구성 향상에 대한 연구", 한국구조물진단유지관리공학회 논문집, 11(4), pp.79~88 (2007), 한국구조물진단유지관리공학회
  12. Lee, J. Y., "An Experimental Study about Characteristics of Penetrating Surface Protection Materials to Promote Concrete Structure Durability", Journal of the Korea Institute of Building Construction, 5(2), pp.93~96 (2005)
  13. Park, B. J., "An Study on the Defects Occurrence and Reduction Factors in Seoul Metropolitan Apartment", Journal of the Architectural Institute of Korea, 31(2), pp.425~426 (2011)
  14. 박권식, "아파트 공용부위 하자유형 분류 및 하자 저감방안", 주거환경, 12(1), pp.187~195 (2014), 한국주거환경학회
  15. 송훈, "Carbonation and Cl- Penetration Resistance of Alkali Silicate Impregnant of Concrete", 한국세라믹학회지, 45(11), pp.719~724 (2008), 한국세라믹학회
  16. 양은익, "표면 침투제에 따른 콘크리트의 염화물 침투와 동결융해 저항성에대한 평가", 콘크리트학회 논문집, 18(1), pp.65~71 (2006), 한국콘크리트학회

관련 논문AI추천

콘크리트 구조물 표면 보호재의 성능에 대한 실험적 평가남용혁, 안영기, 장석환, 정영준한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2006 · 제10권 제5호콘크리트 구조물 보수용 폴리머시멘트 모르타르의 부착강도 특성에 관한 연구김정흠, 박상순한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2010 · 제14권 제5호내부 방수⋅방식재의 프라이머 종류별 역수압 작용 및콘크리트 표면 상태에 따른 부착강도 특성신홍철, 오상근, 최성민, 허능회한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2014 · 제18권 제1호시멘트 혼입 폴리머계 방수재의 구성요소 및 적용환경에 따른 인장·부착성능 평가김성수, 이진용, 최정균한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2021 · 제25권 제6호콘크리트 피착체의 표면수율에 따른 단면복구용 고유동성 SBR 개질 모르타르의 부착특성김두기, 도정윤한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2013 · 제17권 제2호도장재령 3시간에 있어서의 PCS 도장철근의 부착강도 평가송훈, 정선호, 조영국, 한동엽건설환경연구소 · 청운대학교 건설환경연구소 논문집2013 · 제8권 제2호

이 간행물의 다른 논문 (16건)