본문 바로가기
KERD
논문KCI 등재

2,400 MPa 강연선용 포스트텐션 정착구의 하중전달성능

The Load Transfer Performance of Post-tension Anchorage with 2,400 MPa Strands

0

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류안전공학

초록

인장강도가 2,400 MPa인 강연선이 개발되어 콘크리트구조기준 및 KS 규격에 반영되었다. 고강도 프리스트레스트 강연선이 구조물에 적용되기 위해서는 그에 적합한 정착시스템이 함께 사용되어야 한다. 최근에 2,400 MPa 강연선 적용을 위한 포스트텐션 정착구의 개발이진행되어왔으나, 성능평가에 대한 연구가 미비한 실정이다. 따라서 본 연구에서는 2,400 MPa 강연선을 적용한 포스트텐션 정착구 중 가장 활용도가 높은 9 가닥, 15 가닥, 19 가닥 정착구에 대하여 PTI의 Anchorage Design Zone에 의한 국소구역 구조검토를 실시하였고, ETAG013 및KCI-PS101에 의한 하중전달성능평가를 수행하였다. 또한 비선형 수치해석을 통해 시험의 적절성을 분석하였다. 그 결과, 2,400 MPa 정착구는국소구역의 구조성능을 만족하고, 하중전달성능 조건을 만족하는 것으로 나타났다.

Abstract

Strands with ultimate strength of 2,400 MPa was developed and applied in the KCI Code and the KS standard. A high-strength prestressed strandto be applied to a structure, a suitable anchorage system should be used together. Recently, a post tension anchorage for 2,400 MPa strands was developed. but there is not much research on performance evaluation. Therefore, in this study, structural analysis of local zone with 9 strands, 15 strands, and 19strands anchorage were investigated respectively, which are most widely used for post tensioning anchorages with 2,400 MPa strands, according toPTI anchorage zone design method, and Load transfer performance from ETAG013 and/or KCI-PS101 was evaluated. Furthermore, the adequacyof the test was also analyzed by nonlinear numerical analysis. As results, the anchorages with 2,400 MPa strands satisfied the structural performanceof the local area and satisfied the load transfer performance condition.

참고문헌 (6)

  1. 최규형, "원형 정착판을 사용한 포스트텐션 특수정착구의 설계에 관한 연구", 한국구조물진단유지관리공학회 논문집, 20(6), pp.73~83 (2016), 한국구조물진단유지관리공학회
  2. Development of 2,160MPa, "2,400 MPa PS Strand and its Application Technology", Kim, J. K., 2012, pp.45~50
  3. Highway Bridge Design Specification for Limit State Design, "Korean Institute of Bridge and Structural Engineers", KOR, ~ (2015)
  4. Park, H, "Flexural Analysis of Posttensioned Prestressed Concrete Beam with 2,160 MPa and 2,400 MPa Prestressing Strands", Spring Conference of the Korean Society for Railway, pp.1278~1283 (2012), The Korean Society for Railway
  5. Anchorage Zone Design, "Post-Tensioning Institute", PTI, 4~9 (2000)
  6. Design and Construction Method for Prestressed Concrete Structures and Plant Structures, "Prestressed Concrete Committee", KCI, ~ (2014)

관련 논문AI추천

이 간행물의 다른 논문 (25건)