비정질강섬유를 혼입한 초고강도콘크리트의 폭렬특성에 관한 실험적 연구
Experimental Study on the Spalling Properties of Ultra High Strength Concrete containing Amorphous Metallic Fiber
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구에서는 비정질강섬유의 혼입이 초고강도콘크리트의 폭렬특성에 미치는 영향이 실험적으로 검토되었다. 콘크리트는 압축강도 100과 150 MPa의 초고강도콘크리트가 사용되었다. 폴리프로필렌섬유는 0.15 vol%, 비정질강섬유는 0.3 및 0.5 vol%가 혼입되었다. 시험체는 콘크리트의 압축강도와 섬유혼입 조건에 따라 6수준이 제작되었고, ISO-834 가열곡선에 의해 가열되었다. 결과로써 폴리프로필렌섬유와 비정질강섬유가 혼입된 초고강도콘크리트의 폭렬제어에 있어서는 용융된 폴리프로필렌섬유가 형성하는 공극네트워크를 통해 수증기가 이동하는 효과가 지배적인 것으로 나타났다. 또한, 비정질강섬유 0.3v ol% 혼입률에서는 폭렬제어에 큰 영향을 미치지 않지만, 0.5 vol%의 비정질강섬유가 혼입될 경우에는 수증기가 이동할 수 있는 균열의 발생이 억제됨으로써 콘크리트 폭렬의 원인으로 지적되고 있는 수분막힘층(moisture clog)가 형성될 가능성이 높은 것을 확인할 수 있었다.
Abstract
This study examined the effect of amorphous metallic (AM) fibers on the spalling properties of ultra high strength concrete. Six specimens with concrete strengths of 100 MPa and 150 MPa were evaluated with mix proportions of polypropylene (PP) fibers of 0.15% by concrete volume, and proportions of AM fibers of 0.3% and 0.5% by concrete volume. These specimens were then heated in accordance with the ISO-834 heating curve. The movement of water vapor through a pore network formed by molten PP fibers was found to be a dominant factor controlling the spalling of high-strength concrete. Spalling control was not found to be significantly affected by the addition of 0.3% AM fibers; however, when 0.5% AM fibers was added, cracking was limited and so were paths for water vapor migration, increasing the likelihood of a moisture clog and creating the differential internal pressure often blamed for concrete spalling.
참고문헌 (17)
- Kimura, H., "Seismic behavior of 200 MPa ultra-high-strength steel-fiber reinforced concrete columns under varying axial load", Journal of advanced concrete technology, 5(2), pp.193~200 (2007)
- Kalifa, P., "Spalling and pore pressure in HPC at high temperatures", Cement and concrete research, 30(12), pp.1915~1927 (2000)
- Kodur, V. K. R., "Advanced Technology in Structural Engineering", pp.1~9 (2000)
- Choe, G., "Evaluation of the mechanical properties of 200 MPa ultra-high-strength concrete at elevated temperatures and residual strength of column", Construction and Building Materials, 86, pp.159~168 (2015)
- Zeiml, M., "How do polypropylene fibers improve the spalling behavior of in-situ concrete?", Cement and concrete research, 36(5), pp.929~942 (2006)
- Dancygier Avraham N, "Resistance of double-layer reinforced HPC barriers to projectile impact", Int J Impact Eng, 67, pp.39~51 (2014)
- Kanda T, "Interface property and apparent strength of high strength hydrophilic fiber in cement matrix", J Mater Civ Eng, 10, pp.5~13 (1998)
- Bolat H, "The effects of macro synthetic fiber reinforcement use on physical and mechanical properties of concrete", Compos Part B : Eng, 61, pp.191~198 (2014)
- Bencardino F, "Implications of test methodology on post-cracking and fracture behaviour of steel fibre reinforced concrete", Compos Part B : Eng, 46, pp.31~38 (2013)
- Peng, G. F., "Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures", Cement and Concrete Research, 36(4), pp.723~727 (2006)
- Ding, Y., "Influence of different fibers on the change of pore pressure of self-consolidating concrete exposed to fire", Construction and Building Materials, 113, pp.456~469 (2016)
- Choi, S. J., "Shrinkage and corrosion resistance of amorphous metallic-fiber-reinforced cement composites", Composite Structures, 107, pp.537~543 (2014)
- Yang, J. M., "Benefits of using amorphous metallic fibers in concrete pavement for long-term performance", Archives of Civil and Mechanical Engineering, 17(4), pp.750~760 (2017)
- Yoo, D. Y., "Size effect in normal-and high-strength amorphous metallic and steel fiber reinforced concrete beams", Construction and Building Materials, 121, pp.676~685 (2016)
- Choe, G., "Effect of moisture migration and water vapor pressure build-up with the heating rate on concrete spalling type", Cement and Concrete Research, 116, pp.1~10 (2019)
- Gao, J., "Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete", Cement and Concrete Composites, 19(4), pp.307~313 (1997)
- M.R. Bangi, "Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high-strength concrete at elevated temperatures", Cem. Concr. Res, 42(2), pp.459~466 (2012)