FRP 판으로 표면매립 전단보강된 철근콘크리트 T형 보의 전단성능
Shear Capacity of the RC T Beams Strengthened for Shear with NSM FRP Strips
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구의 목적은 실험을 통하여 FRP를 이용한 철근콘크리트 부재의 표면매립 전단보강 효과를 규명하는 것이다. 연구목적을 달성하기 위하여, 3개의 철근콘크리트 T형 보를 제작하고 이중 두 개의 보에 대해서 표면매립 보강방법으로 FRP를 전단보강한 뒤 실험을 통하여보강효과를 규명하였다. 실험에서 두 가지의 전단보강방법을 고려하였는데, 첫째 충분한 매립길이를 가진 표면매립 (NSM) 보강, 둘째 다소 짧은 표면매립길이를 가지지만 추가의 표면부착 (EB) 보강을 한 경우이다. 연구결과, FRP strip을 이용한 표면매립길이를 플랜지 하부까지 길게확보할 경우에는 충분한 전단보강효과가 발휘되는 것으로 나타났다. 반면에 충분한 매립길이가 확보되지 않은 경우에는 FRP sheet로 추가 보강하더라도 전단보강효과가 나타나지 않는 것으로 나타났다.
Abstract
The purpose of this study is to define the shear reinforcing effect of Near-Surface-Mounted (NSM) FRP strips in reinforced concrete (RC)member through a test. Three T shaped RC beams were made and two of them were strengthened with NSM FRP strips for increase shear strength. And those were tested to find the shear strengthening effect. In the test, two case of shear strengthening methods were considered such as 1) with NSMFRP strips having full embedded length and 2) with NSM FRP strips having some what short embedded length and additional externally bonded FRPsheet. As a result, the shear strengthening effect could be obtained when the NSM FRP strips are embedded to have full length up to the bottom ofslab. However the shear strength was not increased in the case of having somewhat short embedded length of NSM FRP strips even additional EBsheet was enhanced.
참고문헌 (14)
- A CI Committee 440-2R, "Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures", American Concrete Institute, ~ (2017)
- Choi, J., "Shear Strengthening Effect of Reinforced Concrete Beam Strengthened with CFRP Plate", Journal of the Architectural Institute of Korea, 24(4), pp.15~22 (2013)
- 한상훈, "CFRP 스트립 표면매립공법으로 보강된 철근콘크리트 보의 전단거동 특성", 한국구조물진단유지관리공학회 논문집, 15(5), pp.178~189 (2011), 한국구조물진단유지관리공학회
- 홍기남, "표면매립된 철계-형상기억합금 스트립으로 휨 보강된 RC보의 장기 휨거동", 한국구조물진단유지관리공학회 논문집, 22(3), pp.103~110 (2018), 한국구조물진단유지관리공학회
- L ee, B., "Analysis of Reinforced Concrete Beams Strengthened with Near Surface Mounted CFRP Strip for Flexure", pp.2014
- 이홍로, "탄소섬유판으로 보강한 철근콘크리트보의 전단보강효과", 대한건축학회논문집 구조계, 24(4), pp.15~22 (2008), 대한건축학회
- 임동환, "표면매입 및 외부부착 탄소섬유판으로 보강된 철근콘크리트 부재의 전단 거동에 관한 실험적연구", 콘크리트학회 논문집, 21(3), pp.337~345 (2009), 한국콘크리트학회
- K im, S., "CFRP-bar NSM system of reinforced concrete members Study on Bonding and Flexural Behavior", pp.2015
- M inistry of Land, Infrastructure and Transport., "Design code for Shear and Torsion of Concrte Structure, KDS 14 20 22", ~ (2021)
- 서수연, "콘크리트내에 표면매입 보강된 FRP 판의 부착강도", 콘크리트학회 논문집, 24(4), pp.415~422 (2012), 한국콘크리트학회[DOI]
- 서수연, "FRP 판으로 표면매입 보강된 철근콘크리트 보의 보강성능", 한국구조물진단유지관리공학회 논문집, 16(1), pp.18~26 (2012), 한국구조물진단유지관리공학회
- Seo, S., "Bond Strength of Near-Surface-Mounted FRP Plate for Retrofit of Concrete Structures", Composite Structures, 95, pp.719~727 (2013)
- 서수연, "콘크리트에 표면매입 보강된 FRP판의 매입간격과 길이에 따른 부착강도", 콘크리트학회 논문집, 25(1), pp.37~43 (2013), 한국콘크리트학회[DOI]
- Seo, S., "Flexural Analysis of RC Beam Strengthened by Partially De-bonded NSM FRP Strip", Composite Part B, 101(15), pp.21~30 (2016)
