본문 바로가기
KERD
논문KCI 등재

강섬유보강콘크리트의 압축거동 특성을 반영한 기둥의 내폭해석

Numerical Study on Columns Subjected to Blast Load Considering Compressive Behavior of Steel Fiber Reinforced Concrete

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류안전공학

초록

강섬유보강콘크리트는 일반 콘크리트에 비해 높은 강도 및 우수한 에너지 소산 능력을 보이며, 폭발하중 작용 시 균열 전파 및 파편발생을 감소시킬 수 있다. 본 연구에서는 유한요소해석 프로그램인 LS-DYNA에 SFRC 재료물성을 구현하고자 콘크리트 비선형 재료모델인K&C 모델의 파괴 곡면(Failure surface) 및 손상 함수(Damage function)를 정의하는 파라미터를 제안하였다. 제안 파라미터 검증을 위하여 단일요소해석을 수행하였으며, 제안 파라미터가 적용된 재료모델은 SFRC 재료시험 거동을 상당히 유사하게 모사하는 것으로 나타났다. 또한, 강섬유 혼입률에 따른 SFRC 기둥의 성능을 평가하기 위하여 내폭해석을 수행하였으며, KOSHA 규정을 참조하여 섬유 혼입률에 따른 SFRC 기둥의 내폭성능을 정량적으로 분석하였다.

Abstract

Steel fiber reinforced concrete (SFRC) exhibits enhanced strength and superior energy dissipation capacity compared to normal concrete, and it can also reduce crack propagation and fragmentation of concrete even when subjected to blast loads. In this study, the parameters defining failure surface and damage function of the K&C concrete nonlinear model were proposed to be applied for the properties of SFRC in LS-DYNA. Single element analysis has been conducted to validate the proposed parameters in the K&C model, which provided very close simulations on the compressive behavior of SFRC. In addition, blast analysis was performed on SFRC columns with different volume fractions of steel fibers, and the blast resistance of SFRC columns was quantitatively analyzed with Korea Occupational Safety & Health Agency (KOSHA) guidelines.

참고문헌 (38)

  1. Lee, M. J., "Numerical simulations of blast response for SFRC slabs using an orthotropic model", Engineering Structures, 238, pp.112150~ (2021)
  2. Yin, H., "Experimental and Numerical Study on Steel Fiber Concrete under Blast Loading", Buildings, 12(2), pp.2119~ (2022)
  3. 이진영, "강섬유 및 FRP Sheet로 보강한 2방향 RC 슬래브의 고속 충격저항성능에 대한 해석적 평가", 한국구조물진단유지관리공학회 논문집, 17(3), pp.1~9 (2013), 한국구조물진단유지관리공학회[DOI]
  4. Livermore Software Technology, "LS-DYNA Keyword User’s Manual, Volumn 2", ~ (2021)
  5. 이건호, "FRP 시트로 보강된 철근콘크리트 벽체의 방호성능 평가", 한국구조물진단유지관리공학회 논문집, 26(5), pp.151~160 (2022), 한국구조물진단유지관리공학회
  6. Lin, X., "Numerical simulation of blast responses of ultra-high performance fibre reinforced concrete panels with strain-rate effect", Construction and Building Materials, 176, pp.371~382 (2018)
  7. Lee, M. J., "An improved calibration method of the K&C model for modeling steel-fiber reinforced concrete", Composite Structures, 269, pp.114010~ (2021)
  8. Lee, S. C., "Compressive Behavior of Fiber-Reinforced Concrete with End-Hooked Steel Fibers", Materials, 8(4), pp.1442~1458 (2015)
  9. Gholampour, A., "Fiber-reinforced concrete containing ultra high-strength micro steel fibers under active confinement", Construction and Building Materials, 187, pp.299~306 (2018)
  10. Abbass, W., "Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete", Construction and Building Materials, 168, pp.556~569 (2018)
  11. Ou, Y. C., "Compressive Behavior of Steel-Fiber-Reinforced Concrete with a High Reinforcing Index", Journal of Materials in Civil Engineering, 24(2), pp.207~215 (2012)
  12. Shafieifar, M., "Experimental and numerical study on mechanical properties of Ultra High Performance Concrete (UHPC)", Construction and Building Materials, 156, pp.402~411 (2017)
  13. Chern, J. C., "Behavior of Steel Fiber Reinforced Concrete in Multiaxial Loading", ACI Materials Journal, 89(1), pp.32~40 (1992)
  14. Babanajad, S. K., "Failure criteria and triaxial behaviour of HPFRC containing high reactivity metakaolin and silica fume", Construction and Building Materials, 29, pp.215~229 (2012)
  15. Yoo, D. Y., "Flexural response of steel-fiber-reinforced concrete beams: Effects of strength, fiber content, and strain-rate", Cement and Concrete Composites, 64, pp.84~92 (2015)
  16. Dwarakanath, H. V., "Comparative Study of Predictions of Flexural Strength of Steel Fiber Concrete", ACI Structural Journal, 88(6), pp.714~720 (1991)
  17. Lu, X., "Behavior of high strength concrete with and without steel fiber reinforcement in triaxial compression", Cement and Concrete Research, 36, pp.1679~1685 (2006)
  18. Ren G. M., "Triaxial compressive behavior of UHPCC and applications in the projectile impact analyses", Construction and Building Materials, 113, pp.1~14 (2016)
  19. Meng, K., "Experimental investigation on the mechanical behavior of hybrid steel-polypropylene fiber reinforced concrete under conventional triaxial cyclic compression", Construction and Building Materials, 291, pp.123262~ (2021)
  20. Chi, Y., "A unified failure envelope for hybrid fibre reinforced concrete subjected to true triaxial compression", Composite Structures, 109, pp.31~40 (2014)
  21. Analytical and Finite Element Concrete Material Models: Comparison of Blast Response Analysis of One Way Slabs, "Xu, J.", American Concrete Institute, 3.1~3.22 (2016)
  22. Aoude, H., "Behavior of Columns Constructed with Fibers and Self-Consolidating Concrete", ACI Structural Journal, 106(3), pp.349~357 (2009)
  23. Nataraja, M. C., "Stress-strain curves for steel-fiber reinforced concrete under compression", Cement & Concrete Composites, 21(5-6), pp.383~390 (1999)
  24. Jang, S. J., "Combined effects of steel fiber and coarse aggregate size on the compressive and flexural toughness of high-strength concrete", Composite Structures, 185, pp.203~211 (2018)
  25. Bencardino, F., "Stress-Strain Behavior of Steel Fiber-Reinforced Concrete in Compression", Journal of Materials in Civil Engineering, 20(3), pp.255~263 (2008)
  26. Jo, B. W., "The Evalution of Elastic Modulus for Steel Fiber Reinforced Concrete", Russian Journal of Nondestructive Testing, 37(2), pp.152~161 (2001)
  27. Mansur, M. A., "Stress-Strain Relationship of High-Strength Fiber Concrete in Compression", Journal of Materials in Civil Engineering, 11(1), pp.21~29 (1999)
  28. Mardalizad, A., "Investigation of mechanical behavior of a quasi-brittle material using Karagozian and Case Concrete (KCC) model", Journal of Rock Mechanics and Geotechnical Engineering, 11(6), pp.1119~1137 (2019)
  29. Yang, S., "Constitutive modeling of UHPCC material under impact and blast loadings", International Journal of Impact Engineering, 153, pp.103860~ (2021)
  30. Xu, S., "Calibration of KCC concrete model for UHPC against low-velocity impact", International Journal of Impact Engineering, 144, pp.103648~ (2020)
  31. Su, Q., "Calibration of KCC model for UHPC under impact and blast loadings", Cement and Concrete Composites, 127, pp.104401~ (2022)
  32. Dilger, W. H., "Ductility of Plain Confined Concrete Under Different Strain Rates", ACI Journal, 81(1), pp.73~81 (1984)
  33. Low, T. S., "Impact Response of Steel Fiber-Reinforced Concrete Using a Split Hopkinson Presuure Bar", Journal of Materials in Civil Engineering, 16(1), pp.54~59 (2004)
  34. Zhang, L., "Dynamic Compressive Toughness of High Strength Fiber Reinforced Concrete", ACI Symposium Publication, 281, pp.1~21 (2011)
  35. Thomas, R. J., "Review of strain rate effects for UHPC in tension", Construction and Building Materials, 153, pp.846~856 (2017)
  36. Malvar, L. J., "Review of Static and Dynamic Properties of Steel Reinforcing Bars", ACI Materials Journal, 95(6), pp.609~616 (1998)
  37. Burrell, R. P., "Response of SFRC Columns under Blast Loads", Journal of Structural Engineering, 141(9), pp.04014209~ (2015)
  38. KOSHA GUIDE D-65-2018, "Korean Occupational Safety Health Agency", KOSHA, ~ (2012)

관련 논문AI추천

이 간행물의 다른 논문 (17건)