축방향 인장을 받는 콘크리트 부재의 FRP 보강근의 인장강화 효과
Tension Stiffening Effect in Axially loaded Concrete Member Oncrete Member
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 GFRP, BFRP와 CFRP 보강근으로 보강된 콘크리트 시험체의 인장 거동 특성을 실험적으로 분석하였다. FRP 보강근의 인장강도는 설계강도와 유사하게 나타났으나, 탄성계수는 다소 낮게 측정되었다. 또한 인장강화 시험체는 OPC와 SFRC를 사용하여150(W)×150(B)×1000(H) mm의 크기로 제작하였다. 균열간격은 탄성계수가 낮고 표면이 보다 매끄러운 GFRP 보강근이 가장 크게 나타났으며, 표면이 다소 거친 BFRP와 탄성계수가 높은 CFRP 보강근의 균열간격은 비슷하게 분석되었다. 하중-변형률관계에서도 GFRP보강근은 균열후 다소 급격한 거동을 보인것에 반하여 BFRP와 CFRP 보강근은 균열발생시 다소 안정적인 거동후 일정수준은 인장강화 효과를 유지하였다. 인장강화지수의 경우 직경이 증가할수록 인장강화지수는 다소 작게 분석되었으며, BFRP보다 GFRP의 경우가 인장강화지수는 높게 분석되었다.
Abstract
In this study, the tensile behavior of concrete specimens reinforced with GFRP (Glass Fiber Reinforced Polymer), BFRP (Basalt Fiber Reinforced Polymer), and CFRP (Carbon Fiber Reinforced Polymer) bars was experimentally analyzed. The tensile strength of the FRP bars is appeared to be similar to the design strength, but the elastic modulus was somewhat lower. Additionally, the specimens for tension stiffening effect were manufacured using OPC (Ordinary Portland Cement) and SFRC (Steel Fiber Reinforced Concrete), with dimensions of 150(W)×150(B)×1000(H) mm. The crack spacing of specimens was most significant for GFRP reinforcement bars, which have a lower elastic modulus and a smoother surface, while BFRP and CFRP bars, with somewhat rougher surfaces and higher elastic moduli, showed similar crack spacings. In the load-strain relationship, GFRP bars exhibited a relatively abrupt behavior after cracking, whereas BFRP and CFRP bars showed a more stable behavior after the cracking phase, maintaining a certain level of tension stiffening effect. The tension stiffening index was somewhat smaller as the diameter increased, and GFRP, compared to BFRP, showed a higher tension stiffening index.
참고문헌 (20)
- American Concrete Institute, "Guide for the Design and Construction of Concrete Reinforced with FRP Bars, ACI 440.1R-03", ~ (2003)
- American Concrete Institute, "Guide test methods for fiber-reinforced polymer, ACI 440.3R-12", ~ (2012)
- Bischoff, P. H., "Effects of shrinkage on tension stiffening and cracking in reinforced concrete", Canadian Journal of Civil Engineering, 28(3), pp.363~374 (2001)
- Canadian Standards Association, "Specification for fibre-reinforced polymers, CAN", CSA-S807, 2010
- Canadian Standards Association, "Design and construction of building structures with fibre-reinforced polymers, CAN", CSA S806-12, 2012
- Fergani, H., "Long-term performance of GFRP bars in concrete elements under sustained load and environmental actions", Composite Structures, 190, pp.20~31 (2018)
- Gribniak, V., "Comparative analysis of deformations and tension-stiffening in concrete beams reinforced with GFRP or steel bars and fibers", Composites Part B : Engineering, 50, pp.158~170 (2013)
- Ha, S, "Direct Tensile Test of GFRP Bar Reinforced Concrete Prisms", Proceedings of the Korea Concrete Institute Conference, pp.323~326 (2005), Korea Concrete Institute
- 장낙섭, "FRP 보강근비에 따른 FRP 보강 콘크리트 슬래브의 파괴거동 분석", 한국구조물진단유지관리공학회 논문집, 25(5), pp.173~181 (2021), 한국구조물진단유지관리공학회
- Jang, N. S., "Comparison of the Prediction of Effective Moment of Inertia of FRP Rebar-Reinforced Concrete by an Optimization Algorithm", Materials, 16(2), pp.621~ (2023)
- Kaklauskas, G., "Shrinkage-free tension stiffening law for various concrete grades", Construction and Building Materials, 189, pp.736~744 (2018)
- Kharal, Z., "Tension Stiffening and Cracking Behavior of Glass Fiber-Reinforced Polymer-Reinforced Concrete", ACI Structural Journal, 114(2) (2017)
- Nayal, R., "Tension stiffening model for concrete beams reinforced with steel and FRP bars", Journal of Materials in Civil Engineering, 18(6), pp.831~841 (2006)
- 오홍섭, "급속 알칼리 환경하에서의 비닐에스터", FRP 보강근의 성능 저하에 관한 실험적 연구, 2019, pp.23(2), 51~59[DOI]
- Rimkus, A., "Mechanical behavior of concrete prisms reinforced with steel and GFRP bar systems", Composite Structures, 220, pp.273~288 (2019)
- 심종성, "이형 GFRP Rebar로 보강된 보의 유효단면 이차모멘트 산정식 제안", 콘크리트학회 논문집, 20(2), pp.185~191 (2008), 한국콘크리트학회
- 손병락, "경량콘크리트와 GFRP 보강근의 부착 특성", 한국구조물진단유지관리공학회 논문집, 17(6), pp.112~121 (2013), 한국구조물진단유지관리공학회[DOI]
- Sooriyaarachchi, H., "Tension stiffening behavior of GFRP-reinforced concrete", Special Publication, 230, pp.975~990 (2005)
- Fib model code for concrete structures 2010, "Taerwe, L.", ~ (2010)
- Vilanova, I., "Experimental study of tension stiffening in GFRP RC tensile members under sustained load", Engineering structures, 79, pp.390~400 (2014)