100MPa급 초고강도 원심성형 콘크리트의 내구성 평가를 위한 실험연구
Experimental Study to Evaluate the Durability of 100 MPa Class Ultra-high Strength Centrifugal Molding Concrete
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 원심성형 기법을 이용하여 구조용 콘크리트 각형보를 개발하였으며, 단면의 휨강성을 확보하기 위하여 단면의 중공률은 10 %이하로 하며 이를 위하여 기존의 빈배합상태의 콘크리트가 아닌 고슬럼프(150∼200)의 물성을 갖으며 설계강도가 100 MPa이상인콘크리트 배합비를 개발하여 적용하였다. 피암터널이나 라멘소교량의 상부구조로 활용될 원심성형 PSC 각형보의 내구성을 조사하기 위하여압축\강도 100 MPa급 초고강도 원심성형 콘크리트의 열화 및 내화학적 특성에 대한 내구성능을 평가하였다. 2022년과 2023년에 제작한 원심성형 각형보 시험체에 대하여 염화물침투 저항성, 촉진탄산화 , 황산염침식 저항성, 동결융해 저항성, 스케일링 저항성 등 콘크리트의 내구성시험을 수행하였다. 본 연구에서 검증한 내용을 고려해 볼 때 추후 제작단계에서 수밀성이 높아지는 원심성형 콘크리트의 내구성은 일반적인콘크리트에 비해 우수한 것으로 조사되었다.
Abstract
In this study, a structural concrete square beam was developed using the centrifugal molding technique. In order to secure the bending stiffness of the cross section, the hollow rate of the cross section was set to 10% or less. Instead of using the current poor mixture of concrete and a concrete mixing ratio with a high slump (150–200) and a design strength of 100 MPa or more was developed and applied. In order to investigate the durability of centrifugally formed PSC square beams to be used as the superstructure of the avalanch tunnel or ramen bridge, the durability performance of ultra-high-strength centrifugally formed concrete with a compressive strength of 100 MPa was evaluated in terms of deterioration and chemical resistance properties.Concrete durability tests, including chloride penetration resistance, accelerated carbonation, sulfate erosion resistance, freeze-thaw resistance, and scaling resistance, were performed on centrifugally formed square beam test specimens produced in 2022 and 2023. Considering the information verified in this study, the durability of centrifugally molded concrete, which has increased watertightness in the later manufacturing stage, was found to be superior to that of general concrete.
참고문헌 (14)
- Ann, Y. K., "The Countermeasure of Deteriorated Concrete", Journal of the Korea Institute for Structual Maintenance and Inspection, 10(3), pp.61~74 (2006)
- Choi, S., "A Study on the Carbonation Characteristics of Fly Ash Concrete by Accelerated Carbonation Test", Journal of the Korea Concrete Institute, 21(4), pp.449~455 (2009)
- Bae, S. H., "Influence of Mineral Admixtures on the Resistance to Sulfuric Acid and Sulfate Attack in Concrete", Journal of the Korea Concrete Institute, 22(2), pp.219~228 (2010)
- Cho, W. J., "Freeze-Thaw Resistance of Alkali Activated Ternary Blended Cement Incorporated with Ferronickel Slag", Journal of the Korean Recycled Construction Resources Institute, 10(2), pp.159~167 (2022)
- Lee, D. S., "The Development of a 100 Mpa Class Ultra-high Strength Centrifugal Molded Square Beam Design and Manufacturing Technology", Journal of the Korea Institute for Structual Maintenance and Inspection, 27(4), pp.1~10 (2023)
- Lee, B., "Freeze-thaw Resistance Estimation of Concrete using Surface Roughness and Image Analysis", Journal of the Korea Institute for Structual Maintenance and Inspection, 22(3), pp.1~7 (2018)
- Park, J. S., "Strength and Resistance to Choloride Penntration in Concrete Containing GGBFS with Ages", Journal of the Korea Concrete Institute, 29(3), pp.307~314 (2017)
- Lee, H. G., "An Experimental Study on Evaluation Methods for Scaling Resistance of Cement Concrete Pavement", Journal of the Korea Institute for Structual Maintenance and Inspection, 19(3), pp.30~38 (2015)
- Choi, S., "A Study on the Carbonation Characteristics of Fly Ash Concrete by Accelerated Carbonation Test", Journal of the Korea Concrete Institute, 21(4), pp.449~455 (2009)
- Baek, C. W., "Durability Assessment of High Strength Concrete with Volume Mineral Admixture", Journal of the Korea Concrete Institute, 27(6), pp.641~649 (2015)
- Kown, S. J., "Effect of Additional Water on Durability and Pore Size Distribution in Cement Mortar", Journal of the Korea Institute for Structual Maintenance and Inspection, 16(3), pp.75~83 (2012)
- Kwon, S. J., "Effect of Additional Water on Durability and Pore Size Distribution in Cement Mortar", Journal of the Korea Institute for Structual Maintenance and Inspection, 16(3), pp.1~10 (2012)
- Ministry of Land, Infrastructure and Transport, "Concrete structure durability design criteria", ~ (2016)
- Ministry of Land, Infrastructure and Transport, "Concrete structure durability evaluation procedures and guidelines", ~ (2016)