반복하중을 받는 대각보강된 철근콘크리트 연결보의 강섬유 형상비와 혼입률에 따른 이력거동
Hysteretic Behavior of Diagonally Reinforced Concrete Coupling Beams According to Aspect Ratio and Volume Fraction of Steel Fiber Under Cyclic Loading
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 반복하중을 받는 대각선 철근콘크리트 커플링 보의 강섬유 형상비와 혼입률에 따른 이력거동을 분석하기 위한 실험적 연구를 수행하였다. 강섬유의 형상비와 혼입률을 주요변수로 설정하였으며, 국내 건축구조기준에서 제시한 연결보의 횡방향 보강량이 약 53% 완화된 4개의 실험체를 제작하였다. 실험에서는 ACI 374.2R-13에 따른 변위제어법으로 반복하중 실험을 수행하였으며, 실험 결과 강섬유가 혼입된 모든 실험체가 현행 구조기준에서 제시하는 공칭전단강도를 상회함을 확인하였다. 강섬유의 형상비가 증가할수록 대각선 철근의 좌굴을 방지하고 강섬유의 브리징 효과로 콘크리트의 균열면 증가를 방지하였다. 강섬유가 혼입된 실험체의 전단강도, 강성감소 및 에너지 소산능력은 강섬유가 혼입되지 않은 Vf0 실험체보다 우수하였다. 따라서 강섬유 철근콘크리트가 횡철근의 디테일을 완화할 수 있다고 판단된다.
Abstract
In this study, an experimental study was conducted to analyze the hysteresis behavior according to the steel fiber aspect ratio and volume fraction of diagonally reinforced concrete coupling beams under to cyclic loading. The aspect ratio and volume fraction of the steel fibers were set as the main variables, and 4 specimens were fabricated in which the amount of transverse reinforcement of the coupling beam suggested in the domestic building structural standard was relaxed by about 53%. In the experiment, cyclic loading experiments were performed in the displacement control method in accordance with ACI 374.2R-13, and as a result of the experiment, it was found that all specimens containing steel fibers exceeded the nominal shear strength suggested by the current structural standards. As the aspect ratio of the steel fibers increased, the steel fibers prevented the buckling of the diagonal reinforcement, and the bridging effect of the steel fibers held the crack surface of the concrete. The shear strength, stiffness reduction and energy dissipation capacity of the specimens containing steel fibers were superior to those of the Vf0 specimens without steel fibers. Therefore, it is judged that the steel fiber reinforced concrete can relieve the details of the transverse reinforced.
참고문헌 (14)
- Korea Design Standard, "Concrete seismic design standards", Korea construction standards center, KDS 14 20 80, ~ (2021)
- "ACI 544.4R-88.. Design considerations for steel fiber reinforced concrete", ACI Committee 544, American Concrete Institute, 18~ (2017)
- "ACI 374.2R-13. Guide for testing reinforced concrete structural elements under slowly applied simulated seismic load", ACI Committee 374, American Concrete Institute, 18~ (2013)
- Paulay, T., "Diagonally Reinforced Coupling Beams of Shear Walls", Shear in Reinforced Concrete, SP-42, American Concrete Institute, 579~598 (1974)
- Naish, D., "Reinforced concrete coupling beams-Part I : testing", ACI Structural Journal, 110(6), pp.1057~ (2013)
- Fortney, P. J., "Investigation on effect of transverse reinforcement on performance of diagonally reinforced coupling beams", ACI Structural Journal, 105(6), pp.781~ (2008)
- 오해철, "강섬유와 묶음철근 보강을 통한 고성능 연결보의 이력거동 평가", 콘크리트학회 논문집, 27(3), pp.291~298 (2015), 한국콘크리트학회[DOI]
- 이현호, "강섬유 계수 및 혼입률을 고려한 SFRC의 강도 및 변형 특성", 콘크리트학회 논문집, 16(6), pp.759~766 (2004), 한국콘크리트학회
- 김진성, "반복하중을 받는 철근콘크리트 연결보에서 강섬유의 보강효과에 관한 연구", 대한건축학회논문집 구조계, 35(10), pp.181~190 (2019), 대한건축학회
- Park, W. S., "Seismic performance of moderately short concrete coupling beams with various reinforcements", ACI Structural Journal, 117(3), pp.141~152 (2020)
- Yazıcı, Ş., "Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC", Construction and Building Materials, 21(6), pp.1250~1253 (2007)
- Jang, S. J., "Use of steel fibers as transverse reinforcement in diagonally reinforced coupling beams with normal-and high-strength concrete", Construction and Building Materials, 187, pp.1020~1030 (2018)
- Jang, S. J., "Feasibility of using high-performance steel fibre reinforced concrete for simplifying reinforcement details of critical members", International Journal of Polymer Science, pp.1~13 (2015)[DOI]
- Jang, S. J., "Application of Steel Fiber Reinforced Concrete (SFRC) for Detail Simplification of Diagonally Reinforced Concrete Coupling Beam", Proceedings of the Korean Concrete Association Conference, pp.619~620 (2013)