본문 바로가기
KERD
논문KCI 등재

오토캐드 환경에서 구현한 해상풍력 지지구조 해석 프로그램

Analysis Program for Offshore Wind Energy Substructures Embedded in AutoCAD

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류안전공학

초록

풍력에너지는 저탄소 사회로 전환하는 과정에서 가장 효율적이고 신뢰할 수 있는 에너지원 중 하나이다. 특히 해상 풍력은 육상 풍력에 비해 안정적이고 고품질의 풍력 자원을 제공하며, 다른 재생에너지에 비해 설치 용량이 높다. 본 논문에서는 해상 풍력 터빈의 하부 구조물 해석에 적합한 새로운 프로그램인 X-WIND 프로그램에 대해 소개하였다. 이 프로그램은 기존 프로그램의 단점을 보완하여 해상풍력 하부구조 해석 프로그램의 활용성을 높이기 위해 개발되었다. 하나의 프로그램 내에서 하부구조물을 단독으로 해석할 수 없거나 전후처리기가 미비한 기존 프로그램과 달리, X-WIND 프로그램은 AutoCAD에 내장되어 있어 설계와 해석이 모두 단일 플랫폼에서 수행된다. 또한 해상 풍력구조물에 필수적인 바람, 파도, 조류 하중에 대한 정적 및 동적 해석을 수행하며 설계, 요소망 생성, 그래프 생성, ULS/FLS 체크를 위한 전후처리기가 포함되어 있다. 이러한 특징을 바탕으로 해상 풍력 에너지 하부 구조물 해석 프로그램의 효율성과 사용성을 향상시켰다.

Abstract

Wind power is one of the most efficient and reliable energy sources in the transition to a low-carbon society. In particular, offshore wind power provides a high-quality and stable wind resource compared to onshore wind power while both present a higher installed capacity than other renewables. In this paper, we present our new program, the X-WIND program well suitable for the assessment of the substructure of offshore wind turbines. We have developed this program to increase the usability of analysis programs for offshore wind energy substructures by addressing the shortcomings of existing programs. Unlike the existing programs which cannot solely perform the substructure analyses or lack pre-post processors, our X-WIND program can complete the assessment analysis for the offshore wind turbines alone. The X-WIND program is embedded in AutoCAD so that both design and analysis are performed on a single platform. This also performs static and dynamic analysis for wind, wave, and current loads, essential for offshore wind power structures, and includes pre/post processors for designs, mesh developments, graph plotting, and code checking. With this expertise, our program enhances the usability of analysis programs for offshore wind energy substructures, promoting convenience and efficiency.

참고문헌 (32)

  1. 이진학, "2엽 및 3엽 수직축 풍력-태양광 하이브리드 가로등의 발전 중 진동계측을 통한 동적 특성 비교", 한국구조물진단유지관리공학회 논문집, 23(5), pp.118~125 (2019), 한국구조물진단유지관리공학회
  2. 이종원, "모드특성을 이용한 풍력발전기 타워의 손상추정기법", 한국구조물진단유지관리공학회 논문집, 16(2), pp.87~94 (2012), 한국구조물진단유지관리공학회
  3. "Renewable energy environment improvement plan according to energy environment change" (2022)[URL]
  4. Jonkman, J. M., "Dynamics of offshore floating wind turbines—model development and verification", Wind Energy, 12(5), pp.459~492 (2009)
  5. 오홍섭, "섬유보강 고성능시멘트계 그라우트가 적용된 강관 연결부의 부착특성에 대한 실험적 연구", 한국구조물진단유지관리공학회 논문집, 18(6), pp.21~29 (2014), 한국구조물진단유지관리공학회
  6. 박용구, "삼차원 T형강체를 이용한 편심코어를 가진 전단벽-골조 구조물의 효율적인 지진해석모델 개발", 한국전산구조공학회논문집, 26(1), pp.19~28 (2013), 한국전산구조공학회
  7. Naess, A., "Stochastic Dynamics of Marine Structures", pp.191~208 (2012), Cambridge University Press
  8. "AeroDyn Theory Manual" (2005)[URL]
  9. Cheng, P., "A numerical model for fully coupled aero-hydrodynamic analysis of floating offshore wind turbine", Ocean Engineering, 173, pp.183~196 (2019), Elsvier
  10. Waris, M. B., "Dynamic response analysis of floating offshore wind turbine with different types of heave plates and mooring systems by using a fully nonlinear model", Coupled Systems Mechanics, 1(3), pp.247~268 (2012), Techno-Press
  11. 홍도천, "착저식 OWC 파력발전장치의 파에너지 흡수효율 및 파랑하중 계산", 한국해양환경•에너지학회지, 13(1), pp.47~52 (2010), 한국해양환경·에너지학회
  12. "RHywind Scotland Pilot Park Project Plan for Construction Activities" (2017)[URL]
  13. 정동호, "부유식 파력발전장치용 계류시스템의 초기설계", 한국해양환경•에너지학회지, 14(3), pp.184~191 (2011), 한국해양환경·에너지학회
  14. 김동은, "다수 배열된 종운동 파력발전장치의 선형 거동에 대한 수치적 연구", 한국해양환경•에너지학회지, 23(4), pp.269~276 (2020), 한국해양환경·에너지학회[DOI]
  15. 이혜빈, "AeroDyn을 활용한 수직축 풍력발전기의 공력해석코드 개발 및 검증", 풍력에너지저널, 10(1), pp.48~54 (2019), 한국풍력에너지학회[DOI]
  16. 이혜빈, "초대형 반잠수식 해양 구조물의 최적 감쇠 모델에 대한 고찰", 한국해양공학회지, 32(1), pp.1~8 (2018), 한국해양공학회
  17. 이혜빈, "부유식 풍력-파력발전 플랫폼과 탑재된 파력발전기와의 단방향 연성 운동 해석", 한국해양공학회지, 30(2), pp.84~90 (2016), 한국해양공학회
  18. 김민수, "OC3 Hywind 부유식 풍력발전기 플랫폼의 유체력 계산 및 운동해석", 한국마린엔지니어링학회지, 37(8), pp.953~961 (2013), 한국마린엔지니어링학회[DOI]
  19. Waris, J. N., "Wave effects on deformable bodies", Applied Ocean Resesarch, 16(1), pp.47~59 (1994), Elsevier
  20. Lamei, A., "On motion analysis and elastic response of floating offshore wind turbines", Journal of Ocean Engineering and Marine Energy, 6, pp.71~90 (2020), Springer
  21. Hughes, T. J. R., "Isogeometric Analysis: CAD, FInite Elements NURBS, Exact Geometry and Mesh Refinement", Computer Method in Applied Mechanics and Engineering, 194(39-41), pp.4135~4195 (2005), Elsevier
  22. 지광습, "OpenFAST와 X-SEA를 이용한 고정식 및 부유식 해상풍력 구조물의 연성동적해석 소프트웨어 개발", 풍력에너지저널, 11(2), pp.5~13 (2020), 한국풍력에너지학회[DOI]
  23. Nurseitov, N., "Comparison of JSON and XML Data Interchange Formats: A Case Study", ISCA International Conference on Computer Applications in Industry and Engineering, pp.157~162 (2009), Society for Computers and Their Applications
  24. 서진성, "서남해 해상풍력 실증단지 해역의 해양 환경 특성", 환경영향평가, 28(5), pp.457~470 (2019), 한국환경영향평가학회
  25. 심운보, "수직도 조정이 가능한 콘크리트 중력식 해상풍력 지지구조물 연결부 설계", 한국구조물진단유지관리공학회 논문집, 22(4), pp.42~51 (2018), 한국구조물진단유지관리공학회

관련 논문AI추천

이 간행물의 다른 논문 (10건)