심해 장비용 압력보상유의 압축성 계수 측정을 위한 실험적 연구
Experimental Study on Compressibility Modulus of Pressure Compensation Oil for Underwater Vehicle
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In order to determine the appropriate volume of the a pressure compensator of deep seabed mining robots, this paper reports on an experimental test for oil volume change in an oil-filled box. At the design stage of underwater robots, it is crucial to determine the capacity of the hydraulic compensator which is replenished as much as the contracted oil volume of the robots. A pilot mining robot, MienRo was designed to work under 6,000 m in the deep sea. The hydraulic actuating oil and pressure compensating oil of MineRo may be exposed at a hydrostatic pressure environment of 600 bar. Although the oil can be assumed to be incompressible, its volume is actually changed under high pressure conditions due to air contained in the oil and oil contraction. To determine the capacity of the pressure compensator, the oil contraction rate should be verified through an experimental test using a hyperbaric chamber.
Abstract
In order to determine the appropriate volume of the a pressure compensator of deep seabed mining robots, this paper reports on an experimental test for oil volume change in an oil-filled box. At the design stage of underwater robots, it is crucial to determine the capacity of the hydraulic compensator which is replenished as much as the contracted oil volume of the robots. A pilot mining robot, MienRo was designed to work under 6,000 m in the deep sea. The hydraulic actuating oil and pressure compensating oil of MineRo may be exposed at a hydrostatic pressure environment of 600 bar. Although the oil can be assumed to be incompressible, its volume is actually changed under high pressure conditions due to air contained in the oil and oil contraction. To determine the capacity of the pressure compensator, the oil contraction rate should be verified through an experimental test using a hyperbaric chamber.
참고문헌 (11)
- 박주석, "유압유의 동점도와 부하변화에 따른 압력의 영향", 1997년 한국정밀공학회 추계학술대회, pp.573~576 (1997)
- 이승국, "영상처리기법을 이용한 내압시험체의 변형도 추정에 관한 연구", 한국해양환경•에너지학회지, 14(4), pp.287~292 (2011), 한국해양환경·에너지학회
- 이일영, "차량용 유압감쇠기 내 기름의 유효 체적탄성계수에 미치는 실린더 벽 탄성의 영향", 한국자동차공학회 논문집, 12(5), pp.187~197 (2004), 한국자동차공학회
- 이재천, "압력변동에 따른 유압유의 유효체적탄성계수 측정에 대한 연구", 한국자동차공학회 논문집, 11(1), pp.179~184 (2003), 한국자동차공학회
- 전정식, "유압유의 종류와 선정방법", 유공학시스템학회논문집, 1(2), pp.1~8 (2004)
- 최종수, "심해저 망간단괴 파일럿 집광로봇 유압시스", 2012년한국해양과학기술협의회 공동학술대회, pp.1570~1573 (2012)
- 홍섭, "파일럿 채광로봇 미내로 개발 및 성능 실증실험", 2009년 한국해양공학회 추계학술대회, pp.60~63 (2013)
- 국내 PCBs 함유(액상) 폐기물 규제기준 검토에 관한 연구, "환경부", 환경부, 43~44 (2009)
- Hopkins V, "Isothermal bulk modulus of selected fluids to 700F and 10,000 psig", ASME J Basic Eng, 86(3), pp.463~467 (1964)
- Watton J, "Fluid power system (Modeling, simulation, analog and microcomputer control)", pp.490~ (1989), Prentice Hall
- Yu J, "The variation of oil effective bulk modulus with pressure in hydraulic system", ASME J Dyn Sys Meas Control, 116(1), pp.146~150 (1994)