임계상대밀도 모델을 이용한 분말 등통로각압축공정시 분말 치밀화 거동
Analysis of Densification Behavior during Powder Equal ChannelAngular Pressing using Critical Relative Density Model
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, bottom-up powder processing and top-down severe plastic deformation processing approaches were combined in order to achieve both full density and grain refinement with least grain growth. The numerical modeling of the powder process requires the appropriate constitutive model for densification of the powder materials. The present research investigates the effect of representative powder yield function of the Shima-Oyane model and the critical relative density model. It was found that the critical relative density model is better than the Shima-Oyane model for powder densification behavior, especially for initial stage.
Abstract
In this study, bottom-up powder processing and top-down severe plastic deformation processing approaches were combined in order to achieve both full density and grain refinement with least grain growth. The numerical modeling of the powder process requires the appropriate constitutive model for densification of the powder materials. The present research investigates the effect of representative powder yield function of the Shima-Oyane model and the critical relative density model. It was found that the critical relative density model is better than the Shima-Oyane model for powder densification behavior, especially for initial stage.
참고문헌 (24)
- H. S. Kim, , J. Kor. Inst. Met. Metal, 30, pp.37~ (1992)
- H. S. Kim, , J. Kor. Inst. Met. Metal, 38, pp.817~ (2000)
- H. S. Kim, , J. Metastable Nanocryst. Mater, 15, pp.235~ (2003)
- S. C. Yoon, "Equal Channel Angular Pressing of Metallic Powders for Nanostructured Materials", Mater. Sci. Forum, 통권 : 503, pp.221~ (2006)
- S. C. Yoon, , Mater. Sci. Eng. A, 449, pp.290~ (2007)
- B. H. Kear, , Acta Mater, 6, pp.227~ (1995)
- J. G. Park, , J. Kor. Ceramic Society, 10, pp.1~ (2007)
- H. Gleiter, , Nanostruct. Mater, 4, pp.121~ (1994)
- H. S. Kim, , Mater. Sci. Eng. A, 307, pp.67~ (2001)
- 윤승채, "나노 구리 분말의 냉간정수압 공정에 대한 치밀화 거동 해석", 한국분말야금학회지, 11(4), pp.341~347 (2004), 한국분말야금학회
- S. Ohsaki, , Acta Mater, 55, pp.2885~ (2007)
- H. S. Kim, , Mater. Sci. Eng. A, 291, pp.86~ (2000)
- R. Z. Valiev, , Prog. Mater. Sci, 45, pp.103~ (2000)
- S. C. Yoon, , J. Kor. Powder Metall. Inst, 11, pp.233~ (2004)
- S. Y. Chang, , J. Alloys Comp, 354, pp.216~ (2004)
- M. Furukawa, , Mater. Sci. Eng. A, 324, pp.82~ (2002)
- B. S. Moon, , Scripta Mater, 46, pp.131~ (2002)
- V. M. Segal, , Mater. Sci. Eng. A, 197, pp.157~ (1995)
- S. Shima, , J. Mech. Sci, 18, pp.285~ (1976)
- Y. Estrin, , Acta Mater, 46, pp.5509~ (1998)
- S. C. Yoon, , J. Kor. Powder Metall. Inst, 13, pp.415~ (2006)
- S. C. Yoon, "Chungnam National University" (2008), Doctoral Dissertation
- S. C. Yoon, , Scripta Mater, 55, pp.159~ (2006)
- 윤승채, "정면압력 ECAP 공정의 유한요소해석", 대한금속·재료학회지, 45(08), pp.473~477 (2007), 대한금속ㆍ재료학회