Ti2AlN과 Ti2AlC 소결체의 마이크로 방전가공에서 재료물성에 따른 가공표면 특성
Characteristics of Material Properties and Machining Surface in Electrical Discharge Machining of Ti2AlN and Ti2AlC Materials
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Ti alloys are extensively used in high-technology application because of their strength, oxidation resistance at high temperature. However, Ti alloys tend to be classified very difficult to cut material. In this paper, The powder synthesis, spark plasma sintering (SPS), bulk material properties such as electrical conductivity and thermal conductivity are systematically examined on Ti2AlN and Ti2AlC materials having most light-weight and oxidation resistance among the MAX phases. The bulk samples mainly consisted of Ti2AlN and Ti2AlC materials with density close to theoretical value were synthesized by a SPS method. Machining characteristics such as machining time, surface quality are analyzed with measurement of voltage and current waveform according to machining condition of micro-electrical discharge machining with micro-channel shape.
Abstract
Ti alloys are extensively used in high-technology application because of their strength, oxidation resistance at high temperature. However, Ti alloys tend to be classified very difficult to cut material. In this paper, The powder synthesis, spark plasma sintering (SPS), bulk material properties such as electrical conductivity and thermal conductivity are systematically examined on Ti2AlN and Ti2AlC materials having most light-weight and oxidation resistance among the MAX phases. The bulk samples mainly consisted of Ti2AlN and Ti2AlC materials with density close to theoretical value were synthesized by a SPS method. Machining characteristics such as machining time, surface quality are analyzed with measurement of voltage and current waveform according to machining condition of micro-electrical discharge machining with micro-channel shape.
참고문헌 (16)
- Hideshi Miura, "Advanced Powder Processing Techniques of Ti Alloy Powders for Medical and Aerospace Applications", 한국분말야금학회지, 20(5), pp.323~331 (2013), 한국분말야금학회
- 허재영, "전도성을 가지는 하이브리드 Ti2AlN 세라믹 복합체의 마이크로 방전드릴링에서 가공성 평가", 한국분말야금학회지, 20(4), pp.285~290 (2013), 한국분말야금학회
- S. Sun, , J. Mater. Process. Tech., 221, pp.243~ (2015)
- Y. Liu, , J. Eur. Ceram. Soc., 31, pp.863~ (2011)
- J. Zhu, , Mat. Sci. Eng. A., 490, pp.62~ (2008)
- Y. Bai, , J. Am. Ceram. Soc., 95, pp.358~ (2012)
- K. Liu, , Int J Adv Manuf Tech., 47, pp.11~ (2010)
- K. Liu, , CIRP Annals -Manufacturing Technology, 58, pp.217~ (2009)
- Z. J. Lin, , Scripta Mater., 56, pp.1115~ (2007)
- C.-C. Liu, , British Ceramic Transactions, 4, pp.149~ (2000)
- C.-C. Liu, , Ceram. Int., 29, pp.679~ (2003)
- C. Wei, , CIRP Annals - Manufacturing Technology, 64, pp.187~ (2013)
- B. Lauwers, , J. Mater. Process. Tech., 149, pp.347~ (2004)
- P. Fonda, , J. Mater. Process. Tech., 202, pp.583~ (2008)
- B. Jabbaripour, , Mach. Sci. Technol., 16, pp.419~ (2012)
- 이상국, "재료변화에 따른 Micro-EDM에서의 가공성에 관한 연구", 한국생산제조시스템학회지, 21(4), pp.658~665 (2012), 한국생산제조시스템학회[DOI]