WC/Co 초경합금 가공 슬러지로부터 알칼리침출정련공정에 의한 W 회수
Recovery of Tungsten from WC/Co Hardmetal Sludge by Alkaline Leaching Hydrometallurgy Process
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study focuses on the development of an alkaline leaching hydrometallurgy process for the recovery of tungsten from WC/Co hardmetal sludge, and an examination of the effect of the process parameters on tungsten recovery. The alkaline leaching hydrometallurgy process has four stages, i.e., oxidation of the sludge, leaching of tungsten by NaOH, refinement of the leaching solution, and precipitation of tungsten. The WC/Co hardmetal sludge oxide consists of WO3 and CoWO4. The leaching of tungsten is most affected by the leaching temperature, followed by the NaOH concentration and the leaching time. About 99% of tungsten in the WC/Co hardmetal sludge is leached at temperatures above 90oC and a NaOH concentration above 15%. For refinement of the leaching solution, pH control of the solution using HCl is more effective than the addition of Na2S·9H2O. The tungsten is precipitated as high-purity H2WO4·H2O by pH control using HCl. With decreasing pH of the solution, the tungsten recovery rate increases and then decrease. About 93% of tungsten in the WC/Co hardmetal sludge is recovered by the alkaline leaching hydrometallurgy process.
Abstract
This study focuses on the development of an alkaline leaching hydrometallurgy process for the recovery of tungsten from WC/Co hardmetal sludge, and an examination of the effect of the process parameters on tungsten recovery. The alkaline leaching hydrometallurgy process has four stages, i.e., oxidation of the sludge, leaching of tungsten by NaOH, refinement of the leaching solution, and precipitation of tungsten. The WC/Co hardmetal sludge oxide consists of WO3 and CoWO4. The leaching of tungsten is most affected by the leaching temperature, followed by the NaOH concentration and the leaching time. About 99% of tungsten in the WC/Co hardmetal sludge is leached at temperatures above 90oC and a NaOH concentration above 15%. For refinement of the leaching solution, pH control of the solution using HCl is more effective than the addition of Na2S·9H2O. The tungsten is precipitated as high-purity H2WO4·H2O by pH control using HCl. With decreasing pH of the solution, the tungsten recovery rate increases and then decrease. About 93% of tungsten in the WC/Co hardmetal sludge is recovered by the alkaline leaching hydrometallurgy process.
참고문헌 (20)
- K. J. A. Brookes, "World Directory and Handbook of Hardmetals and Hard Materials", pp.9~ (1996), International Carbide Data
- K. Halada, , J. Jap. Soc. Powder & Powder Metall., 57, pp.87~ (2010)
- E. Lassner, "Tungsten Properties, Chemistry, Technology of the Element, Alloys and Chemical Compounds", pp.377~ (1999), Bloating-Crushing Process Kluwer Academic Plenum Publishers
- C. S. Freemantle, , Int. J. Refractory Met. & Hard Mater., 44, pp.94~ (2014)
- L. S. Friedman, "U. S. patent No. 3184169", ~ (1965)
- 이길근, "WC", Co 초경 스크랩 산화물의 고체탄소에 의한 환원, 한국분말야금학회지, pp.2005, 12(2)[DOI]
- 이길근, "Effects of Mechanical Milling on the Carbothermal Reduction of Oxide of WC", Co Hardmetal Scrap, 2016, pp.22(2), 260~266[DOI]
- R. Sasai, , J. of the Soc. Mater. Sci., 55, pp.254~ (2006)
- J. C. Lee, , Int. J. Refract. Met. Hard Mater., 29, pp.365~ (2011)
- H. K. Chang, "Korea patent No. 1020070059108", ~ (2007)
- S. W. H. Yih, "Tungsten Sources, Metallurgy, Properties and Applications", pp.79~ (1979), Plenum Press
- K. Nose, , Met. & Tech., 81, pp.908~ (2011)
- K. Vadasdi, , Int. J. Refractory Met. & Hard Mater., 13, pp.45~ (1995)
- J. C. Lee, "Korea patent No. 1020100117087", ~ (2010)
- V. V. Malyshev, , Mater. Sci., 40, pp.555~ (2004)
- V. V. Malyshev, , Theorectical Foundations of Chem. Eng., 41, pp.436~ (2007)
- S. Wongsisa, , Mater. Trans., 56, pp.70~ (2015)
- K. Srinivas, , Hydrometallurgy, 58, pp.43~ (2000)
- A. M. Amer, , Hydrometallurgy, 58, pp.251~ (2000)
- M. Pourbaix, "Atlas of Electrochemical Equilibria in Aqueous Solutions", pp.95~ (1966), Pergamon Press Ltd.