Nb 첨가 철계 합금의 Prior austenite 결정립크기 측정 방법
Measurement Method of Prior Austenite Grain Size of Nb-added Fe-based Alloys
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
High-strength low-alloy (HSLA) steels show excellent toughness when trace amounts of transition elements are added. In steels, prior austenite grain size (PAGS), which is often determined by the number of added elements, is a critical factor in determining the mechanical properties of the material. In this study, we used two etching methods to measure and compare the PAGS of specimens with bainitic HSLA steels having different Nb contents These two methods were nital etching and picric acid etching. Both methods confirmed that the sample with high Nb content exhibited smaller PAGS than its low Nb counterpart because of Nb’s ability to hinder austenite recrystallization at high temperatures. Although both etching approaches are beneficial to PAGS estimation, the picric acid etching method has the advantage of enabling observation of the interface containing Nb precipitate. By contrast, the nital etching method has the advantage of a very short etching time (5 s) in determining the PAGS, with the picric acid etching method being considerably longer (5 h).
Abstract
High-strength low-alloy (HSLA) steels show excellent toughness when trace amounts of transition elements are added. In steels, prior austenite grain size (PAGS), which is often determined by the number of added elements, is a critical factor in determining the mechanical properties of the material. In this study, we used two etching methods to measure and compare the PAGS of specimens with bainitic HSLA steels having different Nb contents These two methods were nital etching and picric acid etching. Both methods confirmed that the sample with high Nb content exhibited smaller PAGS than its low Nb counterpart because of Nb’s ability to hinder austenite recrystallization at high temperatures. Although both etching approaches are beneficial to PAGS estimation, the picric acid etching method has the advantage of enabling observation of the interface containing Nb precipitate. By contrast, the nital etching method has the advantage of a very short etching time (5 s) in determining the PAGS, with the picric acid etching method being considerably longer (5 h).
참고문헌 (23)
- J. R. Davis, "Alloying: Understanding the Basics" (2001), ASM International
- M. S. Rashid, , Science, 208, pp.862~ (1980)
- D. A. Skobir, , Mater. Technol, 45, pp.295~ (2011)
- W. B. Lee, , Korean J. Met. Mater, 34, pp.688~ (1996)
- G. S. Park, "Analysis of phase transformation theory in Nb alloyed HSLA steel by hot rolling deformation", M.S, pp.2016
- M. Calcagnotto, , Proceedings of the 2nd International Symposium on Steel Science (ISSS 2009), pp.21~ (2009)
- N. Hansen, , Scr. Mater, 51, pp.801~ (2004)
- M. Okatasu, , Int. J. Fatigue, 30, pp.1358~ (2008)
- J. Komotori, , ICF7, pp.1213~ (1989)
- 김경후, "저합금강의 이중 오스테나이징 템퍼링에서 냉각 속도에 따른 미세조직 및 기계적 특성 변화", 대한금속·재료학회지, 55(8), pp.559~565 (2017), 대한금속·재료학회[DOI]
- G. R. Wang, , Metall. Trans. A, 20, pp.2093~ (1989)
- M. Islam, , J. Mater. Eng. Perform, 5, pp.593~ (1996)
- C. B. Park, "The effect of austenite grain size on the γ", αtransformation in Nb added microalloyed steel, Hanyang Univ, 2010
- B. Dutta, , Acta Metall. Mater, 40, pp.653~ (1992)
- J. G. Speer, , Metall. Trans. A, 20, pp.25~ (1989)
- A. Matsuzaki, , Mater. Sci. Technol, 15, pp.518~ (1999)
- R. Thackray, , Materials, 13, pp.3296~ (2020)
- "ASTM E407-07e1, Standard Practice for Microetching Metals and Alloys", ASTM International, ~ (2007)
- J. O. Andersson, , Calphad, 26, pp.273~ (2002)
- "ASTM E112-13, Standard Test Methods for Determining Average Grain Size", ASTM International, ~ (2013)
- A. W. Brewer, , Mater. Charact, 27, pp.53~ (1991)
- V. L. Viswanathan, , Metallography, 10, pp.291~ (1977)
- D. A. Porter, "Phase Transformation in Metals and Alloys", pp.213~ (1992), ITC