The Formation and Crystallization of Amorphous Ti50Cu20Ni20Al10 Powder Prepared by High-Energy Ball Milling
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Amorphization and crystallization behaviors of Ti50Cu20Ni20Al10 powders during high-energy ball milling and subsequent heat treatment were studied. Full amorphization obtained after milling for 30 h was confirmed by X-ray diffraction and transmission electron microscope. The morphology of powders prepared using different milling times was observed by field-emission scanning electron microscope. The powders developed a fine, layered, homogeneous structure with prolonged milling. The crystallization behavior showed that the glass transition, Tg, onset crystallization, Tx, and super cooled liquid range ΔT = Tx–Tg were 691, 771 and 80 K, respectively. The isothermal transformation kinetics was analyzed by the John-Mehn-Avrami equation. The Avrami exponent was close to 2.5, which corresponds to the transformation process with a diffusion-controlled type at nearly constant nucleation rate. The activation energy of crystallization for the alloy in the isothermal annealing process calculated using an Arrhenius plot was 345 kJ/㏖.
Abstract
Amorphization and crystallization behaviors of Ti50Cu20Ni20Al10 powders during high-energy ball milling and subsequent heat treatment were studied. Full amorphization obtained after milling for 30 h was confirmed by X-ray diffraction and transmission electron microscope. The morphology of powders prepared using different milling times was observed by field-emission scanning electron microscope. The powders developed a fine, layered, homogeneous structure with prolonged milling. The crystallization behavior showed that the glass transition, Tg, onset crystallization, Tx, and super cooled liquid range ΔT = Tx–Tg were 691, 771 and 80 K, respectively. The isothermal transformation kinetics was analyzed by the John-Mehn-Avrami equation. The Avrami exponent was close to 2.5, which corresponds to the transformation process with a diffusion-controlled type at nearly constant nucleation rate. The activation energy of crystallization for the alloy in the isothermal annealing process calculated using an Arrhenius plot was 345 kJ/㏖.
참고문헌 (16)
- A. Inoue, , Acta. Mater., 48, pp.279~ (2000)
- T. Zhang, , Mater. Sci. Eng. A, 181, pp.1423~ (1994)
- A. Inoue, , Mater. Lett., 19, pp.131~ (1994)
- K. Amiya, , Mater. Sci. Eng. A, 179, pp.692~ (1994)
- T. Zhang, , Mater. Trans. JIM, 39, pp.1001~ (1998)
- Y. C. Kim, , Mater. Sci. Forum, 통권 : 360, pp.67~ (2001)
- I. K. Jeng, , Intermetal, 10, pp.1271~ (2002)
- A. Inoue, , Mater. Trans. JIM, 34, pp.1234~ (1993)
- A. W. Weeber, , Physica B,, 153, pp.93~ (1988)
- L. Schultz, , J. Less Common Metals, 145, pp.233~ (1988)
- P. P. Choi, , Mater. Sci. Eng. A, 449, pp.1119~ (2007)
- N. T. H. Oanh, , Mater. Sci. Forum, 통권 : 534, pp.233~ (2007)
- F. Spaepen, , Science, 235, pp.1010~ (1987)
- R. W. Cahn, "Physical Metallurgy", pp.525~ (1977), North Holland Publ. Co.
- M. Avrami, , J. Chem. Phys., 7, pp.1103~ (1939)
- M. J. Vestel, , Acta Mater., 51, pp.5309~ (2003)