급속응고 6061Al/Graphite 복합재료의 볼밀링 시간에 따른 흑연 분산거동 및 기계적 특성
Effect of Ball milling Time on Graphite Dispersion and Mechanical Properties in Rapidly Solidified 6061 Al Composite
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A composite of rapidly solidified Al-6061 alloy powder with graphite particle reinforcements was prepared by ball milling and subsequent hot extrusion. The microstructure and mechanical properties of these composites were investigated as a function of milling time. With increasing milling time, the gas atomized initially and spherical powders became elongated with a maximum aspect ratio after milling for 30 h. Then, refinement and spheroidization were achieved by further milling to 70 h with a homogeneous and fine dispersion of graphite particles forming between the matrix alloy layers. The best compression and wear properties were obtained in the powder milled for 70 h, associated with the increased fine and homogeneous distribution of graphite particles in the aluminum alloy matrix.
Abstract
A composite of rapidly solidified Al-6061 alloy powder with graphite particle reinforcements was prepared by ball milling and subsequent hot extrusion. The microstructure and mechanical properties of these composites were investigated as a function of milling time. With increasing milling time, the gas atomized initially and spherical powders became elongated with a maximum aspect ratio after milling for 30 h. Then, refinement and spheroidization were achieved by further milling to 70 h with a homogeneous and fine dispersion of graphite particles forming between the matrix alloy layers. The best compression and wear properties were obtained in the powder milled for 70 h, associated with the increased fine and homogeneous distribution of graphite particles in the aluminum alloy matrix.
참고문헌 (10)
- S. V. Nair, , Int. Metall. Rev., 30, pp.275~ (1985)
- M. G. McKimpson, , Mater. Sci. Eng. A, 107, pp.93~ (1989)
- S. K. Biswas, , Wear, 68, pp.349~ (1981)
- J. Sugishita, , Wear, 77, pp.181~ (1982)
- S. Das, , Wear, 133, pp.173~ (1989)
- P. K. Rohatgi, , Metallurgical Transaction A, 22A, pp.1435~ (1991)
- B. N. Pramila Bai, , Wear, 76, pp.211~ (1982)
- C. B. Lin, , Wear, 217, pp.167~ (1998)
- C. C. Koch, "Powder Metal Technologies and Applications, in: ASM Handbook, Vol. 7", pp.61~ (1998), ASM International
- D. Y. Maeng, , Mater. Sci. Eng. A, 304, pp.564~ (2001)