가스분무주조 Cu-Sn-Ni-Si 합금의 미세조직 및 상온 인장성질
Microstructure and Tensile Properties of Spray Cast Cu-Sn-Ni-Si Alloy
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, Cu-10Sn and Cu-10Sn-2Ni-0.2Si alloys have been manufactured by spray casting in order to achieve a fine scale microstructure and high tensile strength, and investigated in terms of microstructural evolution, aging characteristics and tensile properties. Spray cast alloys had a much lower microhardness than continuous cast billet because of an improved homogenization and an extended Sn solid solubility. Spray cast Cu-Sn-Ni-Si alloy was characterized by an equiaxed grain microstructure with a small-sized (Ni, Si)-rich precipitates. Cold rolling of Cu-Sn-Ni-Si alloy increased a tensile strength to 1220 MPa, but subsequent ageing treatment reduced a ultimate tensile strength to 780 MPa with an elongation of 18%.
Abstract
In this study, Cu-10Sn and Cu-10Sn-2Ni-0.2Si alloys have been manufactured by spray casting in order to achieve a fine scale microstructure and high tensile strength, and investigated in terms of microstructural evolution, aging characteristics and tensile properties. Spray cast alloys had a much lower microhardness than continuous cast billet because of an improved homogenization and an extended Sn solid solubility. Spray cast Cu-Sn-Ni-Si alloy was characterized by an equiaxed grain microstructure with a small-sized (Ni, Si)-rich precipitates. Cold rolling of Cu-Sn-Ni-Si alloy increased a tensile strength to 1220 MPa, but subsequent ageing treatment reduced a ultimate tensile strength to 780 MPa with an elongation of 18%.
참고문헌 (12)
- W. A. Soffa, , Prog. Mater. Sci, 49, pp.347~ (2004)
- S. Suzuki, , J. Alloys Compounds, (417), pp.116~ (2006)
- J. C. Zhao, , Acta Materialia, 46, pp.4203~ (1998)
- P. Virtanen, , Mater. Sci. Eng. A, 251, pp.269~ (1998)
- V. C. Srivastava, , J.Mater. Proc. Tech, 147, pp.174~ (2004)
- D. Zhao, , Mater. Sci. Eng. A, 361, pp.93~ (2003)
- B. Cantor, , Prog. Mater.Sci, 42, pp.373~ (1997)
- P. S. Grant, , Prog. Mater. Sci, 39, pp.497~ (1995)
- K. H. Baik, , Acta Materialia, 52, pp.199~ (2004)
- 백경호, "가스분무성형 Cu-10Cr 합금의 열적응고거동 및 미세조직", 대한금속·재료학회지, 44(5), pp.329~337 (2006), 대한금속·재료학회
- J. D. Hwang, , J. Mater. Eng. Perform, 7, pp.495~ (1998)
- F. Kohler, , Acta Mater, 57, pp.56~ (2009)