본문 바로가기
KERD
논문KCI 등재

희토류 저감형 란타눔 지르코네이트(La2O3-ZrO2계) 세라믹스와 열차폐코팅의 제조 및 특성평가

Fabrication and Characterization of Ceramics and Thermal Barrier Coatings of Lanthanum Zirconate with Reduced Rare-earth Contents in the La2O3-ZrO2 System

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류금속공학

초록

Lanthanum zirconate, La2Zr2O7, is one of the most promising candidates for next-generation thermal barrier coating (TBC) applications in high efficient gas turbines due to its low thermal conductivity and chemical stability at high temperature. In this study, bulk specimens and thermal barrier coatings are fabricated via a variety of sintering processes as well as suspension plasma spray in lanthanum zirconates with reduced rare-earth contents. The phase formation, microstructure, and thermo-physical properties of these oxide ceramics and coatings are examined. In particular, lanthanum zirconates with reduced rare-earth contents in a La2Zr2O7-4YSZ composite system exhibit a single phase of fluorite or pyrochlore after fabricated by suspension plasma spray or spark plasma sintering. The potential of lanthanum zirconate ceramics for TBC applications is also discussed.

Abstract

Lanthanum zirconate, La2Zr2O7, is one of the most promising candidates for next-generation thermal barrier coating (TBC) applications in high efficient gas turbines due to its low thermal conductivity and chemical stability at high temperature. In this study, bulk specimens and thermal barrier coatings are fabricated via a variety of sintering processes as well as suspension plasma spray in lanthanum zirconates with reduced rare-earth contents. The phase formation, microstructure, and thermo-physical properties of these oxide ceramics and coatings are examined. In particular, lanthanum zirconates with reduced rare-earth contents in a La2Zr2O7-4YSZ composite system exhibit a single phase of fluorite or pyrochlore after fabricated by suspension plasma spray or spark plasma sintering. The potential of lanthanum zirconate ceramics for TBC applications is also discussed.

참고문헌 (15)

  1. D. R. Clarke, , Surf. Coat. Technol., 163, pp.67~ (2003)
  2. D. R. Clarke, , Mater. Today, 8, pp.22~ (2005)
  3. D. R. Clarke, , MRS Bull, 37, pp.891~ (2012)
  4. R. Vassen, , J. Am. Ceram. Soc., 83, pp.2023~ (2000)
  5. W. Pan, , MRS Bull., 37, pp.917~ (2012)
  6. X. Q. Cao, , J. Euro. Ceram. Soc., 24, pp.1~ (2004)
  7. X. Ren, , Acta. Mater., 69, pp.397~ (2014)
  8. J. Wu, , J. Am. Ceram. Soc., 85, pp.3031~ (2002)
  9. 권창섭, "열차폐코팅용 (La1-xGdx)2Zr2O7 산화물의 상형성과 열전도도", 한국분말야금학회지, 19(6), pp.429~434 (2012), 한국분말야금학회
  10. J. W. Fergus, , Metall. Mater. Trans. E, 1, pp.1~ (2014)
  11. P. K. Schelling, , Phil. Mag. Lett., 84, pp.127~ (2004)
  12. C. G. Levi, , Curr. Opi. Sol. St. Mater. Sci., 8, pp.77~ (2004)
  13. 권창섭, "유성구볼밀을 이용한 La2O3-Gd2O3-ZrO2 계 서스펜션준비와서스펜션 플라즈마용사를 이용한 (La1-xGdx)2Zr2O7 코팅증착과 특성", 한국분말야금학회지, 20(6), pp.453~459 (2013), 한국분말야금학회
  14. 김선주, "열차폐코팅용 GdO1.5-ZrO2계 희토류 지르코네이트 세라믹스의 상형성과 열물리 특성", 한국세라믹학회지, 51(6), pp.554~559 (2014), 한국세라믹학회[DOI]
  15. H. Lehmann, , J. Am. Ceram. Soc., 86, pp.1338~ (2003)

관련 논문AI추천

열차폐코팅을 위한 희토류가 저감된 란타눔/가돌리늄 지르코네이트의 상형성 및 열물성남산, 권창섭, 김성원, 김형태, 오윤석, 이성민, 이수진한국분말재료학회 · 한국분말재료학회지2015 · 제22권 제6호서스펜션의 준비방법에 따른 서스펜션 플라즈마 용사를 이용한 La2O3-Gd2O3-ZrO2 계 열차폐코팅의 제조와 특성남산, 김성원, 김형태, 오윤석, 이성민, 이소율한국표면공학회 · 한국표면공학회지2016 · 제49권 제6호서스펜션 플라즈마 용사법으로 제조한 La2Zr2O7, (La0.5Gd0.5)2Zr2O7, Gd2Zr2O7 열차폐코팅의 상형성과 열전도 특성김선주, 김성원, 김형태, 오윤석, 이성민, 장병국한국표면공학회 · 한국표면공학회지2016 · 제49권 제6호서스펜션 플라즈마 용사로 제조된 란타눔/가돌리늄 지르코네이트 열차폐코팅의 구조와 열전도도 특성권창섭, 김성원, 김형태, 오윤석, 이성민, 장병국한국표면공학회 · 한국표면공학회지2014 · 제47권 제6호서스펜션 플라즈마 용사법을 이용한 La2Zr2O7/YSZ 2층세라믹 열차폐코팅의 제조와 특성평가권창섭, 김성원, 김형태, 오윤석, 이성민, 이수진, 장병국한국표면공학회 · 한국표면공학회지2015 · 제48권 제6호열차폐코팅용 La_2(Zr_(1-x)Hf_x)_2O_7 산화물의 상형성과 열물성김성원, 김형태, 오윤석, 이성민, 장병국한국분말재료학회 · 한국분말재료학회지2011 · 제18권 제6호

이 간행물의 다른 논문 (9건)