Fabrication and Characterization of Thermal Battery using Porous MgO Separator Infiltrated with Li based Molten Salts
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Ceramic powder, such as MgO, is added as a binder to prepare the green compacts of molten salts of an electrolyte for a thermal battery. Despite the addition of a binder, when the thickness of the electrolyte decreases to improve the battery performance, the problem with the unintentional short circuit between the anode and cathode still remains. To improve the current powder molding method, a new type of electrolyte separator with porous MgO preforms is prepared and characteristics of the thermal battery are evaluated. A Spherical PMMA polymer powder is added as a pore-forming agent in the MgO powder, and an organic binder is used to prepare slurry appropriate for tape casting. A porous MgO preform with 300 μm thickness is prepared through a binder burnout and sintering process. The particle size of the starting MgO powder has an effect, not on the porosity of the porous MgO preform, but on the battery characteristics. The porosity of the porous MgO preforms is controlled from 60 to 75% using a pore-forming agent. The batteries prepared using various porosities of preforms show a performance equal to or higher than that of the pellet-shaped battery prepared by the conventional powder molding method.
Abstract
Ceramic powder, such as MgO, is added as a binder to prepare the green compacts of molten salts of an electrolyte for a thermal battery. Despite the addition of a binder, when the thickness of the electrolyte decreases to improve the battery performance, the problem with the unintentional short circuit between the anode and cathode still remains. To improve the current powder molding method, a new type of electrolyte separator with porous MgO preforms is prepared and characteristics of the thermal battery are evaluated. A Spherical PMMA polymer powder is added as a pore-forming agent in the MgO powder, and an organic binder is used to prepare slurry appropriate for tape casting. A porous MgO preform with 300 μm thickness is prepared through a binder burnout and sintering process. The particle size of the starting MgO powder has an effect, not on the porosity of the porous MgO preform, but on the battery characteristics. The porosity of the porous MgO preforms is controlled from 60 to 75% using a pore-forming agent. The batteries prepared using various porosities of preforms show a performance equal to or higher than that of the pellet-shaped battery prepared by the conventional powder molding method.
참고문헌 (30)
- R. A. Guidotti, , J. Power Sources, 161, pp.1443~ (2006)
- P. Masset, , J. Power Sources., 164, pp.397~ (2007)
- R. A. Guidotti, , J. Power Sources, 183, pp.388~ (2008)
- P. J. Masset, , J. Power Sources., 177, pp.595~ (2008)
- P. J. Masset, , J. Power Sources., 178, pp.456~ (2008)
- P. Butler, , J. Power Sources., 136, pp.240~ (2004)
- H. W. Cheong, , Ceram. Process., 13, pp.308~ (2012)
- 최유송, "열전지의 전기화학적 특성에 미치는 황철석(FeS₂) 입자크기의 영향", 공업화학, 25(2), pp.161~166 (2014), 한국공업화학회[DOI]
- D. H. Doughty, , J. Power Sources., 110, pp.357~ (2002)
- S. Martin, , Int. Pyroprocess. Res. Conf. (2012)
- V. Tomeckova, , J. Am. Ceram. Soc., 95, pp.3763~ (2012)
- L. Yuan, "Investigation of anode materials for lithium-ion batteries", Ph. D., pp.2006
- 김완제, "원통형 고체산화물 연료전지 스택 제작 및 성능평가", 한국수소및신에너지학회논문집, 24(6), pp.467~471 (2013), 한국수소및신에너지학회[DOI]
- F. Zhang, , Chem. Sus. Chem., 8, pp.1043~ (2015)
- 조광연, "Wetting Behavior of Molten Salt on the Ceramic Filter Separators for Thermal Batteries", 한국세라믹학회지, 45(7), pp.423~429 (2008), 한국세라믹학회
- R. A. Guidotti, "SAND99-29070", ~ (2000)
- R. A. Guidotti, "SAND2002-1458", ~ (2002)
- R. Hashaikeh, , J. Phys., 165, pp.012008~ (2009)
- E. L. Corral, "SAND2008-0528", ~ (2008)
- K. Prasanna, , J. Solid State Electrochem., 17, pp.1377~ (2013)
- D. Djian, , J. Power Sources., 172, pp.416~ (2007)
- T. H. Cho, , J. Power Sources., 181, pp.155~ (2008)
- S. Mei, , J. Eur. Ceram. Soc., 26, pp.67~ (2006)
- L. A. Mondy, "SAND2013-9787", ~ (2013)
- Y. Yang, , Nano Lett., 14, pp.6578~ (2014)
- S. S. Zhang, , J. Power Sources., 164, pp.351~ (2007)
- X. M. Feng, "Electrochem", Communications, 6, pp.1021~ (2004)
- Sung-Il Oh, "Protective Metal Oxide Coatings on Zinc-sulfide-based Phosphors and their Cathodoluminescence Properties", Bulletin of the Korean Chemical Society, 31(12), pp.3723~3729 (2010), 대한화학회
- L.G. Ferguson, , J. Mater. Sci., 36, pp.137~ (2001)
- R. A. Guidotti, , AIAA Pap. (2007)