Multi-step Metals Additive Manufacturing Technologies
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Metal additive manufacturing (AM) technologies are classified into two groups according to the consolidation mechanisms and densification degrees of the as-built parts. Densified parts are obtained via a single-step process such as powder bed fusion, directed energy deposition, and sheet lamination AM technologies. Conversely, green bodies are consolidated with the aid of binder phases in multi-step processes such as binder jetting and material extrusion AM. Green-body part shapes are sustained by binder phases, which are removed for the debinding process. Chemical and/or thermal debinding processes are usually devised to enhance debinding kinetics. The pathways to final densification of the green parts are sintering and/or molten metal infiltration. With respect to innovation types, the multistep metal AM process allows conventional powder metallurgy manufacturing to be innovated continuously. Eliminating cost/time-consuming molds, enlarged 3D design freedom, and wide material selectivity create opportunities for the industrial adoption of multi-step AM technologies. In addition, knowledge of powders and powder metallurgy fuel advances of multi-step AM technologies. In the present study, multi-step AM technologies are briefly introduced from the viewpoint of the entire manufacturing lifecycle.
Abstract
Metal additive manufacturing (AM) technologies are classified into two groups according to the consolidation mechanisms and densification degrees of the as-built parts. Densified parts are obtained via a single-step process such as powder bed fusion, directed energy deposition, and sheet lamination AM technologies. Conversely, green bodies are consolidated with the aid of binder phases in multi-step processes such as binder jetting and material extrusion AM. Green-body part shapes are sustained by binder phases, which are removed for the debinding process. Chemical and/or thermal debinding processes are usually devised to enhance debinding kinetics. The pathways to final densification of the green parts are sintering and/or molten metal infiltration. With respect to innovation types, the multistep metal AM process allows conventional powder metallurgy manufacturing to be innovated continuously. Eliminating cost/time-consuming molds, enlarged 3D design freedom, and wide material selectivity create opportunities for the industrial adoption of multi-step AM technologies. In addition, knowledge of powders and powder metallurgy fuel advances of multi-step AM technologies. In the present study, multi-step AM technologies are briefly introduced from the viewpoint of the entire manufacturing lifecycle.
참고문헌 (26)
- 오지원, "적층식 제조(Additive manufacturing) 기술동향", 한국분말재료학회지, 24(6), pp.494~507 (2017), 한국분말재료학회[DOI]
- "ASTM, F 2792-12a, Standard Terminology for Additive Manufacturing Technologies", ~
- M. M. Matthias, , Metal AM, 4, pp.159~ (2018)
- "ISO", ASTM DIS 52900:2018(E), Additive manufacturing - General principles - Terminology
- 오지원, "Anisotropy in Green Body Bending Strength due to Additive Direction in the Binder-Jetting Additive Manufacturing Process", 대한금속·재료학회지, 57(4), pp.227~235 (2019), 대한금속·재료학회[DOI]
- Q. Sun, , Rapid Prototyp. J, 14, pp.72~ (2008)
- R. Burnham, "USA US 10,464,260", J. LaPlante and A. Preston : USA US 10, ~ (2019)
- D. M. Nieto, , Addit. Manuf, 23, pp.79~ (2018)
- J. Park, , Arch. Metall. Mater, 65, pp.1069~ (2020)
- R. K. Enneti, , Mater. Manuf. Process, 27, pp.103~ (2012)
- Y. Wang, , Procedia Manuf, 10, pp.779~ (2017)
- H. Chen, , Rapid Prototyp. J, 22, pp.527~ (2016)
- I. Gibson, "Additive Manufac turing Technologies", pp.205~ (2015), Springer
- P. K. Gurrala, , Virtual Phys. Prototyp, 9, pp.127~ (2014)
- S. Mirazababaei, , J. Manuf. Mater. Process, 3, pp.1~ (2019)
- P. Nandwana, , Curr. Opin. Solid State. Mater. Sci, 21(4), pp.207~ (2017)
- M. T. Stawovy, , Int. J. Refract. Met. Hard Mater, 83, pp.104981~ (2019)
- C. L. Cramer, , Addit. Manuf, 28, pp.333~ (2019)
- J. M. Molina, , Acta Mater, 50, pp.247~ (2002)
- M. Doyle, , Procedia Manuf, 1, pp.251~ (2015)
- M. Schöbel, , Compos. Part A Appl. Sci. Manuf, 66, pp.103~ (2014)
- J. Roger, , J. Alloys Compd, 747, pp.484~ (2018)
- V. Kumar, , Procedia Manuf, 10, pp.935~ (2017)
- A. du Plessis, , J. Mater. Sci. Technol, 24, pp.3137~ (2015)
- Y. Y. Kaplanskii, , Mater. Sci. Eng. A, 743, pp.567~ (2019)