고령토의 첨가가 3차원 망상 구조를 가지는 다공성 규조토-고령토 복합재의 기본 특성에 미치는 영향
The Effects of Kaolin Addition on the Properties of Reticulated Porous Diatomite-kaolin Composites
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the effects of kaolin addition on the properties of reticulated porous diatomite-kaolin composites are investigated. A reticulated porous diatomite-kaolin composite is prepared using the replica template method. The microstructure and pore characteristics of the reticulated porous diatomite-kaolin composites are analyzed by controlling the PPI value (45, 60, and 80 PPI) of the polyurethane foam (which are used as the polymer template), the ball-milling time (8 and 24 h), and the amount of kaolin (0–50 wt. %). The average pore size decreases as the amount of kaolin increases in the reticulated porous diatomite-kaolin composite. As the amount of kaolin increases, it can be determined that the amount of inter-connected pore channels is reduced because the plate-shaped kaolin particles connect the gaps between irregular diatomite particles. Consequently, a higher kaolin percentage affects the overall mechanical properties by improving the pore channel connectivity. The effect of kaolin addition on the basic properties of the reticulated porous diatomite-kaolin composite is further discussed with characterization data such as pore size distribution, scanning electron microscopy images, and compressive strength
Abstract
In this study, the effects of kaolin addition on the properties of reticulated porous diatomite-kaolin composites are investigated. A reticulated porous diatomite-kaolin composite is prepared using the replica template method. The microstructure and pore characteristics of the reticulated porous diatomite-kaolin composites are analyzed by controlling the PPI value (45, 60, and 80 PPI) of the polyurethane foam (which are used as the polymer template), the ball-milling time (8 and 24 h), and the amount of kaolin (0–50 wt. %). The average pore size decreases as the amount of kaolin increases in the reticulated porous diatomite-kaolin composite. As the amount of kaolin increases, it can be determined that the amount of inter-connected pore channels is reduced because the plate-shaped kaolin particles connect the gaps between irregular diatomite particles. Consequently, a higher kaolin percentage affects the overall mechanical properties by improving the pore channel connectivity. The effect of kaolin addition on the basic properties of the reticulated porous diatomite-kaolin composite is further discussed with characterization data such as pore size distribution, scanning electron microscopy images, and compressive strength
참고문헌 (14)
- A. R. Studart, , J. Am. Ceram. Soc, 89, pp.1771~ (2006)
- S. Ahmad, , Adv. Mat. Res, 795, pp.5~ (2013)
- P. Sepulveda, , Am. Ceram. Soc. Bull, 76, pp.61~ (1997)
- I. Fukuura, "Fabrication and Properties of Some Oxide Ceramics: Alumina, Mullite and Zironia, in Fine Ceramics", pp.165~ (1998), Elsevier
- C. Xiao, , Composites, Part A, 124, pp.105511~ (2019)
- J. -H. Ha, , Ceram. Int, 42, pp.13796~ (2016)
- DL. Shimanovich, , Beilstein J. Nanotechnol, 9, pp.1423~ (2018)
- W. -L. Huo, , J. Am. Ceram. Soc, 99, pp.3512~ (2016)
- B. A. da Silva, , Ceram. Int, 46, pp.16096~ (2020)
- R. Bade, , Fatigue Fract. Eng. Mater. Struct, 42, pp.1775~ (2019)
- X. Zhang, , J. Am. Ceram, Soc, 88, pp.1826~ (2005)
- H. -T. Wang, , J. Am. Ceram, Soc, 81, pp.781~ (1998)
- 최용석, "고분자-점토 나노복합체 이해와 향후 연구 방향", Korean Chemical Engineering Research(HWAHAK KONGHAK), 46(1), pp.23~36 (2008), 한국화학공학회
- J. -H. Ha, , Ceram. Int, 39, pp.8955~ (2013)