Hot-Cracking Behaviors in (CoNi)85Mo15 Medium-Entropy Alloys Manufactured via Powder Bed Fusion
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Additive manufacturing makes it possible to improve the mechanical properties of alloys through segregation engineering of specific alloying elements into the dislocation cell structure. In this study, we investigated the mechanical and microstructural characteristics of CoNi-based medium-entropy alloys (MEAs), including the refractory alloying element Mo with a large atomic radius, manufactured via laser-powder bed fusion (L-PBF). In an analysis of the printability depending on the processing parameters, we achieved a high compressive yield strength up to 653 MPa in L-PBF for (CoNi)85Mo15 MEAs. However, severe residual stress remained at high-angle grain boundaries, and a brittle µ phase was precipitated at Mo-segregated dislocation cells. These resulted in hot-cracking behaviors in (CoNi)85Mo15 MEAs during L-PBF. These findings highlight the need for further research to adjust the Mo content and processing techniques to mitigate cracking behaviors in L-PBF-manufactured (CoNi)85Mo15 MEAs.
Abstract
Additive manufacturing makes it possible to improve the mechanical properties of alloys through segregation engineering of specific alloying elements into the dislocation cell structure. In this study, we investigated the mechanical and microstructural characteristics of CoNi-based medium-entropy alloys (MEAs), including the refractory alloying element Mo with a large atomic radius, manufactured via laser-powder bed fusion (L-PBF). In an analysis of the printability depending on the processing parameters, we achieved a high compressive yield strength up to 653 MPa in L-PBF for (CoNi)85Mo15 MEAs. However, severe residual stress remained at high-angle grain boundaries, and a brittle µ phase was precipitated at Mo-segregated dislocation cells. These resulted in hot-cracking behaviors in (CoNi)85Mo15 MEAs during L-PBF. These findings highlight the need for further research to adjust the Mo content and processing techniques to mitigate cracking behaviors in L-PBF-manufactured (CoNi)85Mo15 MEAs.
참고문헌 (51)
- E. P. George, , Acta Mater, 188, pp.435~ (2020)
- Z. Li, , Prog. Mater. Sci, 102, pp.296~ (2019)
- B. Cantor, , Mater. Sci. Eng. A, 375–377, pp.213~ (2004)
- B. Gludovatz, , Nat. Commun, 7, pp.10602~ (2016)
- H. Chang, , Mater. Des, 197, pp.109202~ (2021)
- H. Jung, , J. Mater. Sci. Technol, 181, pp.71~ (2023)
- H. Chang, , J. Alloys Compd, 896, pp.162962~ (2022)
- S. S. Sohn, , Adv. Mater, 31, pp.1807142~ (2019)
- T. J. Jang, , Acta Mater, 255, pp.119030~ (2023)
- H. Jung, , Steel Res. Int, 94, pp.202200240~ (2023)
- J. Han, , Int. J. Refract. Met. Hard Mater, 119, pp.106535~ (2024)
- S. Chen, , Entropy, 20, pp.937~ (2018)
- A. O. Moghaddam, , J. Mater. Sci. Technol, 77, pp.131~ (2021)
- Y. M. Wang, , Nat. Mater, 17, pp.63~ (2018)
- C. Y. Yap, , Appl. Phys. Rev, 2, pp.041101~ (2015)
- S. P. Murray, , Nat. Commun, 11, pp.4975~ (2020)
- J. Ge, , Mater. Des, 219, pp.110774~ (2022)
- B. Han, , Mater. Sci. Eng. A, 820, pp.141545~ (2021)
- J. G. Kim, , Mater. Sci. Eng. A, 773, pp.138726~ (2020)
- P. Wang, , Mater. Des, 168, pp.107576~ (2019)
- Z. Tong, , J. Alloys Compd, 785, pp.1144~ (2019)
- R. Li, , J. Alloys Compd, 746, pp.125~ (2018)
- H. Jung, , Addit. Manuf, 61, pp.103360~ (2023)
- J. M. Park, , Addit. Manuf, 47, pp.102283~ (2021)
- H. Park, , Addit. Manuf, 86, pp.104223~ (2024)
- J. H. Park, , Met. Mater. Int, 28, pp.2836~ (2022)
- C. Garcia-Cabezon, , Met. Mater. Int, 28, pp.2652~ (2022)
- X. Zhang, , Mater. Charact, 173, pp.110951~ (2021)
- J. Xu, , Mater. Des, 209, pp.109940~ (2021)
- S. Nam, , J. Alloys Compd, 762, pp.29~ (2018)
- C. A. Schneider, , Nat. Methods, 9, pp.671~ (2012)
- H. Peng, , J. Alloys Compd, 862, pp.158286~ (2021)
- L. Huang, , Mater. Sci. Eng. A, 830, pp.142327~ (2022)
- P. Agrawal, , Addit. Manuf, 32, pp.101098~ (2020)
- X. Gao, , J. Alloys Compd, 847, pp.156563~ (2020)
- Z. Li, , Acta Mater, 131, pp.323~ (2017)
- E. G. Astafurova, , J. Alloys Compd, 925, pp.166616~ (2022)
- B. Xu, , Nat. Mater, 23, pp.755~ (2024)
- Y. L. A. Amar, , Addit. Manuf, 68, pp.103522~ (2023)
- P. Kumar, , Acta Mater, 258, pp.119249~ (2023)
- A. Bandyopadhyay, , Addit. Manuf, 22, pp.758~ (2018)
- S. P. Yadav, , Metals(Basel), 13, pp.287~ (2023)
- K. M. Bertsch, , Acta Mater, 199, pp.19~ (2020)
- Z. Sun, , Scr. Mater, 168, pp.129~ (2019)
- E. Chauvet, , Acta Mater, 142, pp.82~ (2018)
- L. Guo, , J. Alloys Compd, 865, pp.158892~ (2021)
- J. M. Park, , Scr. Mater, 237, pp.115715~ (2023)
- B. Guo, , Addit. Manuf, 55, pp.102792~ (2022)
- J. Hu, , J. Mater. Res. Technol, 21, pp.3526~ (2022)
- G. Marchese, , Materials, 11(10), pp.106~ (2018)
- K. Kempen, , J. Manuf. Sci. Eng. Trans. ASME, 136, pp.061026~ (2014)